Stainless Pop-Up Bow Lights
|
|
Pop-up bow lights are made of stainless steel. Simply pull up for night use, and keep flush during the day. Go ahead and treat yourself.
FEATURES:
- Keeps deck free of protruding lights
- Marine grade 316 stainless steel
- Folds down flush when not in use
- Uses a #78 bulb
- USCG approved 1 nautical mile
- NMMA type accepted
- Meets 72 Colregs
- Overall width is 3-1/2" and length is 5-1/2"
INSTALLATION:
- Each light is supplied with a cut-outtemplate. Use the supplied template to make a cut-out where the light will go.
Fasten with three #10 screws (not included)
Part No. |
Description |
680-204-M |
Polished |
680-204-MC |
Plastic Undercover Cup |
680-211M |
Polished Stainless Steel LED Light |
680-200 |
Polished Stainless Steel Extendable LED Pop-up Bow Light
- Extends 10.5" Above deck when in use.
- Drops 16" below deck when not in use. |
|
Hull / Docking / Backup Lights
|
|
- 12-Volt DC
- 50-Watt Halogen Lamp
- Draws 4 Amps each
- Sealed Built in Rear Heat Sink
- Thermal Insulated Wires
- Pyrex Optical Lens
- Spring Loaded Lamp Assembly
- Removable Lens Cover
- Water Tight Gaskets Included
Part No. |
Description |
727-580-0000 |
Black |
727-580-0100 |
White |
727-580-0200 |
Stainless Steel |
|
Flush Mounted Side Mount Bow Lights
|
|
Side mount bow lights that are flush mounted in the hull of your boat. Sold in pairs.
Part No. |
Description |
620-1016 |
Flush Mounted Side Bow Lights (red & green) |
|
Suction Cup Running Lights
|
|
Fulton Marine running lights are tested to meet or exceed A-16 standards and meet lawful requirements for inland and international waters when properly placed on your boat.
- Uses 4 AA batteries (not included)
- It floats and is waterproof
- Double o-ring seal
- Shock resistant rubber housing Rubber booted on/off switch
|
Billet Flush Mount Bow Light Bezel
|
|
These bezels are machined from 1/4" 6061-T6 billet aluminum. It is designed to fit the flush mounted side bow lights #620-1016. Available polished or in your choice of powder coated colors. These can also be used with the LED Nav Lights and the adapter bezel plate (730-LEDNLAP), however the adapter plate will require some machining to fit.
Part No. |
Description |
124-3300* |
Billet Flush Mount Bow Light Bezel |
* = Available in: Polished, Blue, Red, Black, Purple, White, Yellow, Platinum |
|
Billet Pop-Up Bow Light Bezel
|
|
This bezel is machined form 1/4" 6061-T6 billet aluminum. It is designed to fit the stainless steel pop-up bow lights #680-204-M. Available polished or in your choice of powder coated colors. Does not fit the LED Pop-Up Bow Light (730-LEDPUBL).
Part No. |
Description |
125-BLB-400* |
Billet Pop-Up Bow Light Bezel (Each) |
* = Available in: Polished, Blue, Red, Black, Purple, White, Yellow, Platinum, Teal |
|
Polycarbonate Hull Light
|
|
Surrounded by a heavy duty plastic housing, these UV stabilized,corrosion-resistant lights feature full rubber cushioning to prevent crackedlamps. The sealed beam lamps are also fully protected against shorts or damage.These lights swivel on a silicone rubber ball for easy adjustment that will notchange even in rough water. Now available with or without mold-in polycarbonatelens. Primarily designed for boats with a more pronounced flare in the bow andnormally for boats with a hull smaller than 25' in length. 12V. 220,000 candlepower spot lamp. Sold in pairs.
Part No. |
Description |
620-3294H7614 |
Flood Style Hull Light |
620-3294H7604 |
Spot Style Hull Light |
|