This Part has options, please click the button below to order.
137-858 + Option(s) Mayfair electronics by Hardin Marine and Marine
Design Corp have teamed up to bring the new
generation of the Heads-Up indicator system to
the marine industry. This new conversion system
will replace your push-pull cables that have lots
of slop due to the cable functionality . This new
conversion system will utilize the Mayfair 0-5
volt stainless steel potted sender or the Mercury
3-wire trim sender. The custom design and
proprietary software controller that drives the
highly engineered, electric drive motor
assemblies will mount in the same location as
your push/pull cables. With this new conversion
you will have a true accurate reading on your
indicator sticks. The software will auto retract
the heads up indicator sticks to a down position
when you turn off your ignition. When the ignition
is turned back on the indicator stick will
automatically return to the position the drives or
tabs were left at. Pair this system with the Drive
Sync option of Marine Design you will always have
your drives sync together for ultimate efficiency.
|
|
137-8647 Non-Standard port side trim sender and mount
|
|
|
|
|
137-8688 Trim Sender Actuator for Mercury Verado applications.
|
|
137-8689 Trim Sender Conversion Kit for #6 Drive, With Hinge Pin
|
|
|
|
|
|
|
|
|
|
|
137-8659 Smartcraft / NMEA 2000 Upgrade Box for Mayfair Trim Indicators
Required when using Smartcraft and NMEA 2000 systems to properly convert electronic signals.
|
|
137-8681 Mercury Trim Tab Actuator LED Retrofit Kit
This kit is designed to convert your Mercury K-planes from Cable indicators to the New Mayfair LED indicators , " NO MORE CABLES"
- Mercury K-planes with 1/2" Ram pins
- Non Smartcraft K-planes
- Fit Mayfair / Performance Hydraulic Trim tabs
- Fits Gen 1 Trim Tabs
Kit Includes:
- All mounting Hardware included
- new upper and lower ram pins
- stainless thru hull installation kit
- Mayfair electron actuators
Indicator LED Panel sold separately
|
|
137-8682 Mercury Trim Tab Actuator LED Retrofit Kit
This kit is designed to convert your Mercury K-planes from Cable indicators to the New Mayfair LED indicators , " NO MORE CABLES"
- Mercury K-planes with 5/8" Ram pins
- Non Smartcraft K-planes
- Fit Mayfair / Performance Hydraulic Trim tabs
- Fits Gen 2 Trim Tabs
Kit Includes:
- All mounting Hardware included
- new upper and lower ram pins
- stainless thru hull installation kit
- Mayfair electron actuators
Indicator LED Panel sold separately
|
|
|
|
|
137-8414 Trim Tab Sensor for Mayfair Trim Tabs.
|
|
137-8680 Mercury Drive Actuator LED Retrofit Kit
This kit is designed to add support on your Bravo, Alpha or TRS drive to support the New Mayfair LED indicators , " NO MORE CABLES"
This Kit is For:
- Mercury Bravo, Alpha and TRS Drives
- Fits Mayfair Trim Indicator Systems
Kit Includes:
- All mounting Hardware included
- wiring hardness included
- stainless thu hull installation kit
- Mayfair electronic actuators
Indicator LED Panel sold separately
|
|
137-8727 Single LED Drive Indicator Installation Kit
This kit is designed to add support on your Bravo drive to support the New Mayfair LED indicators , " NO MORE CABLES"
Includes:
Mercury Drive Actuator LED Retrofit Kit
This Kit is For:
- Mercury Bravo Drives
- Fits Mayfair Trim Indicator Systems
Kit Includes:
- All mounting Hardware included
- wiring hardness included
- stainless thu hull installation kit
- Mayfair electronic actuators
Mercruiser Actuator Kit 846063A1
Indicator LED Panel sold separately
|
|
137-8699 Used in newer model 525-846063A1 applications, these clamps hold the actuator in place to the trim ram. If you have the old band clamp and saddle style setup, you can retrofit to these custom fit clamps. Sold in pairs.
|
|
137-8683 33C to Electronic Sender Conversion Kit for LED Indicators
This is a universal mount Trim Sender for use with Mayfair LED Indicators. The bracket mounts to a 33c cable clamp provision with two screws. The #10-32 threaded end can attach to a heim end or ball joint to convert over what was previously a cable operated setup to work with a Mayfair Trim Indicator.
|
|
137-8684 30 Ft Wire Harness, Drives/Tabs
This harness will cover a pair of drives OR a pair of tabs. This harness will cover 2 senders only
|
|
525-8M0095310 SENDER ASSY-TRIM Mercruiser 8M0095310 supercedes 863187A1, 863187
NOTE: If the sender you are replacing has, Green, Purple and Black wires, on this replacement model Green = Red, Purple = White and Black = Blue.
|
|
525-84-895820T02 HARNESS Assembly Mercruiser 84-895820T02
This harness connects the tab senders (any kind) to a plug that is on all
Mercury engines equipped with SmartCraft as of 2007.
|
|
