UFlex

Nisida Aluminum Spoke Steering Wheel

• 13.8" Diameter
• Black Air Leather Look Grip
• Polished, Silver or Black Spokes
• 6 Bolt Pattern
• Includes hub for 3/4" Tapered shaft.

Need help installing your new steering wheel? Check out this handy tutorial!

20-Degree Bezel Mounting Kit for Steering Systems

Used on rotary and rack steering systems, the X35 20° bezel mounting kit

comes with
• a black bezel
• mounting bracket and hardware including steering wheel shaft nut
• Made in USA.

3300 Style 10-32 Threaded Cable. Stainless Steel Hardware. 3.4” (87mm) Stroke. 0.27” (7mm) Diameter. For use with inboard, sterndrive, and outboard engines with appropriate accessories.

Note: For highest performance and reliability use Hardin Marine 3300 / 33C Cables.

Mach Zero 3300 Style 10-32 Threaded Cable

• 3.4” (87mm) Stroke.
• 0.31” (8mm) Diameter.
• Stainless Steel Hardware.
• For use with inboard, sterndrive, and outboard engines with appropriate accessories.

Note: For highest performance and reliability use Hardin Marine 3300 / 33C Cables.

90-Degree Bezel Mounting Kit for Steering Systems

Used on rotary and rack steering systems, the X34 90° bezel mounting kit

comes with
• a black bezel
• mounting bracket and hardware including steering wheel shaft nut
• Made in USA.

Antigua Steering Wheel, 3 Spoke, 13.7" Diameter, 

All U-FLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards.

• Thermoplastic antishock material
• Standard 3/4’’ taper
• Hub included
• Meet with the EN 28848 and ABYC P22 standards

All Antigua steering wheels are provided with an exclusive hub that easily allows the steering wheel to always be aligned properly.

Need help installing your new steering wheel? Check out this handy tutorial!

Constructed from Anodized Aluminum and Stainless Steel/ According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installations for heavier loads. It is also possible to install more then two AV actuators in multiple applications. Use locking version in high performance applications.

• Maximum load for single installations: (120 kg - 265 lbs)
• Maximum load for dual installations: (240 kg - 529 lbs)
• Maximum load is recommended not to be exceeded.
• Supplied with all mounting hardware.
• Stainless steel telescopic ram for manual operation in case of emergency.
• Available on request without manual emergency opening device for high performance boats.
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
• IP 65 protection rated
• Speed: 25mm/sec no load applied, 17 mm/sec maximum load
• Current absorption in single installations: 10A at 12V, 5A at 24V
• Current absorption in dual installations: 20A at 12V, 10A at 24V
• AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved.

Constructed from Anodized Aluminum and Stainless Steel/ According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installations for heavier loads. It is also possible to install more then two AV actuators in multiple applications. Use locking version in high performance applications.

• Maximum load for single installations: (120 kg - 265 lbs)
• Maximum load for dual installations: (240 kg - 529 lbs)
• Maximum load is recommended not to be exceeded.
• Supplied with all mounting hardware.
• Stainless steel telescopic ram for manual operation in case of emergency.
• Available on request without manual emergency opening device for high performance boats.
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
• IP 65 protection rated
• Speed: 25mm/sec no load applied, 17 mm/sec maximum load
• Current absorption in single installations: 10A at 12V, 5A at 24V
• Current absorption in dual installations: 20A at 12V, 10A at 24V
• AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved.

This panel has two fittings that are used for feeding Uflex Outboard Hydraulic Lines through a bulkhead. Available in Black, White, or Chrome.  The fittings are 3/8" compression fittings on both sides. The standard 3/8" compression is equal to 9/16"-24 UNEF 2A thread.

Kit to connect C22 and 4300 series cables to top mount two lever control boxes:
- B46
- B50
- B58
- B59
- B203
- B204
- B207
- B208
- B322
- B324

Kit to connect C14, MACH14 and OMC® type “OS” cables to B47 and B49 control boxes.

Kit to connect C4 and OMC® type “O” cables to B47 and B49 control boxes.

Kit to connect C2, C8, MACHZero and all 33C style cables to B47 and B49 control boxes.

Kit to connect C22 and 4300 series cables to top mount two lever control boxes B101 and B102

Kit to connect C5, C16, MACH5 and Mercury® style cables to single lever control boxes, except B301, B302, B103 and B104.

Kit to connect C14, MACH14 and OMC® type “OS” cables to engine for use with B89 and B90.

Adjuster for control boxes B203, B204, B207, B208.

Adapts C2, C8, MACHZero and all 33C style cables for use with Mercury® engines.

Adapts C2, C8, MACHZero and all 33C style cables for use with Johnson® / Evinrude® engines.

Kit to connect C2, C8 and MACHZero cables to B301 and B302 controls (supplied with the box).