462-23-107045 "1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends."
Type: Pole w/rubber caps, Length: 28"-48"
|
|
462-23-107055 "1" Anodized aluminum pole telescopes quickly and easily to raise the cover and allow water to drain off. Locks and unlocks with a twist. Includes rubber caps at both ends."
Type: Pole w/rubber caps, Length: 36"-64"
|
|
462-23-107954 Easily adjustable. Pole rests on a rubber foot and the web straps attach to the stern with non marring hooks. " - System Includes:
- 1" diameter aluminum telescoping center pole (28" to 48")
- Adjustable 1" wide Black polyweb straps with non-marring hooks
" Size: For boats up to 19'
|
|
462-354-3274151 Die cast chrome plated zinc.
A: 3/8", B: 1-13/16", C: 2-9/16", Fastener: #8 FH, Pack: 1 pr.
Sold: Pack
|
|
462-9-0578DP0CHR Chrome plated zinc sockets will accommodate 3/8" battens up to 1 3/4" wide.
Measure 3 1/4"L x 5/8"W. #6 screw.
|
|
462-32-11982 Don't let your interior suffer from mold and mildew damage. Proper ventilation can keep these boat destroying fungi from attacking your boat! Installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out! The Boat Vent II is manufactured from a superior grade poly carbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.
|
|
462-500-60002 The innovative vent assembly allows any boat cover to vent to help prevent mold and mildew inside the boat. Includes an anodized aluminum telescoping pole, vent, and instructions. Length: 22" to 70"
|
|
462-500-60000 Lightweight telescoping poles. Description: Snap & vinyl end, Size: 22"-70"
|
|
462-500-60008 New innovative design. Two systems can be easily connected. Ideal for pontoons. Extend the life of your cover. Eliminates virtually all areas that could collect water. Simple to install with two pre-installed, adjustable 20' straps that snap quickly to the rear tow hooks and 40' adjustable strap to cradle the bow. The system fits up to 28 foot boats. For pontoons, 2 systems can be easily joined together. Each system comes with one adjustable (22" to 70") support pole, system center, strap set and instuctions. Boat Size: Up to 28' New innovative design. Two systems can be easily connected. Ideal for pontoons. Extend the life of your cover. Eliminates virtually all areas that could collect water. Simple to install with two pre-installed, adjustable 20' straps that snap quickly to the rear tow hooks and 40' adjustable strap to cradle the bow. The system fits up to 28 foot boats. For pontoons, 2 systems can be easily joined together. Each system comes with one adjustable (22" to 70") support pole, system center, strap set and instructions.
|
|
462-354-3274101 New recessed base design allows for a water tight seal without the use of gaskets. Use fastener #10FH.
Size: 7/16" x 2", Pack: 1 pr.
Sold: Pack
|
|
462-3-94305 Support your boat cover canvas with this telescoping support pole with a rubber base. Anodized aluminum helps prevent salt water corrosion and weathering. Quick lock fitting for fast, easy adjustment. Type: Snap-On Dot fastener, Length: 36"-64"
|
|
462-354-3274001 "Injection molded nylon sockets fit snugly on a 7/8" rail without fasteners and are easily removed when not in use."
Size: 3/8" x 1-11/16", Pack: 1 pr.
Sold: Pack
|
|
462-74-40035 Attaches to all Starbrite Extend-A-Brush premium handles to make an adjustable support for boat covers. Constructed of unbreakable nylon.
Case: 12
Sold: Each
|
|
462-32-11991 Extend the life of your boat cover by preventing water from pooling on top. Includes a non-marring tip on each end of the telescoping aluminum pole and a durable plastic adjustment knob for easy height adjustment.
Length: 37"-70"
Sold: Each
|
|
462-32-11992 This fully adjustable support pole is supplied with a male canvas snap, a grommet tip, and a plain end cap to fit any cover application. The pole is aluminum, with a durable plastic adjuster to set the correct height.
Length: 37"-70"
Sold: Each
|
|
462-32-11976 "This new base is designed for use with all 7/8" diameter (bottom pole) support poles. The bottom pad is made from EPDM to provide additional friction to hold pole in place against the deck versus the traditional crutch tip design. In addition, the base pad has a swivel capability that allows the pole to be positioned at just the right angle for your application. Simply remove the bottom tip from your existing support pole and insert over adapter to secure. (Pole not included)"
:
Sold: Each
|
|
462-32-55741 Helps extend the life of your boat cover by preventing water from pocketing. Includes 50 feet of webbing, quick release buckles, a boat cover support pole that snaps to the webbing, and two hooks to attach to the transom.
:
Sold: Each
|
|
462-32-935 Accepts any bow. Chrome plated.
Pack: 1 pr.
Sold: Pack
|
|
