462-6-351150020 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 4 3/4" W x 5 1/2" H
|
|
This Part has options, please click the button below to order.
462-6-357 + Option(s) Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or gen set enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM .
Flangemount, Hose: 4", Volts: 12, Size: 9-3/8" L x 8-3/4" W x 9" H
Flexmount, Hose: 4", Volts: 12, Size: 9-1/4" L x 9-3/16" W x 9-5/8" H
|
|
462-189-66
- High efficiency blower
- High capacity at low amp draw
- Constructed of ABS plastic
- Meets & exceeds: ABYC H-2
- NMMA Type Accepted, U.S.C.G. 33 CFR sections 183.410, 183.425 & 183.610
- 1 Year Warranty
Hose: 3", CFM: 158, Volts: 12, Amps: 3.5
Hose: 4", CFM: 240, Volts: 12, Amps: 3.5
|
|
462-189-804741701 Extra heavy duty marine radial blower is designed for engine compartment ventilation prior to startup. Made for continuous duty and is therefore suitable for air intake or extraction in bilges, galleys, accommodation and other compartments. Flange Mount design with double ball bearing motor, high-impact anti-shock ABS body with stainless steel shaft and screws.
Mount: Flange, Hose: 4", CFM: 324, Volts: 12, Amps: 12.5, Size: 11.5"H x 10"W x 6"L
|
|
462-6-347440000 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Note: Is not ignition protected and is not intended for bilge ventilation on vessels with gasoline engines.
Hose: 3", CFM: 100, Volts: 115 AC, Amps: 0.6, Size: 7" L x 6 5/8" W x 7 5/8" H
|
|
462-6-367400000 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.
Hose: 3", CFM: 150, Volts: 12, Amps: 6.8, Size: 8" L x 8 3/16" W x 9 1/8" H
|
|
462-6-347390010 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Hose: 3", CFM: 150, Volts: 12, Amps: 10, Size: 8" L x 6 3/4" W x 7 3/4" H
|
|
462-6-354000000 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 8 3/4" W x 9" H
|
|
462-6-355150010 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.
Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 5" W x 5 1/2" H
|
|
462-6-354400000 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flex mount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction.
Hose: 4", CFM: 250, Volts: 12, Amps: 12, Size: 8 3/4" L x 9 1/4" W x 9 5/8" H
|
|
462-6-354000010 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Hose: 4", CFM: 250, Volts: 24, Amps: 7.5, Size: 8 3/4" L x 8 3/4" W x 9" H
|
|
This Part has options, please click the button below to order.
462-29- + Option(s) Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection.
Hose: 3", CFM: 135, Volts: 12, Amps: 2.9, Fuse: 4A
Hose: 4", CFM: 235, Volts: 12, Amps: 4.3, Fuse: 7A
|
|
This Part has options, please click the button below to order.
462-23-174 + Option(s) The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed.
Standard, White, Hose: 4", Volts: 12, Amps: 2.5
Water Resistant, White, Hose: 4", Volts: 12, Amps: 2.5
|
|