462-16-25215 "12V Power-in and freewheel-out (TW4000), power-in power-out and freewheel-out (TW9000) operation with positive mechanical brake.
Clutch control knob engages gears or releases load in a controlled freewheel mode. For boat trailers and other horizontal pulling applications. Equipped with 20' x 2" polyester strap and hook.
Not for movement of humans." Max Load: 9000 lbs., Speed: 15 f.p.m. Sold: Each
|
|
462-313-P7830201AJ Wire your vehicle for permanent installation applications. Includes 25' of 10 ga. positive wire, 10' of black ground wire, 60 amp. circuit breaker, and winch plug. Fits: 712, 912, 915, T2400, T3200PO, T4000, ST712 Sold: Each
|
|
462-313-P5591000AJ Replacement Clutch Control Knob Fits: RC23 & RC30 series units Sold: Each
|
|
462-16-24907 NO CLUTCH, so no freewheeling capability. Suitable for short-distance vertical lifting applications not involving people or loads over where people could be present. Used for Boat Lifts.
NOTE: Not for movement of humans Max Load: 3000 lbs, Amps: 70, Volts: 12 Sold: Each
|
|
462-16-24059 For mounting all StrongArm electric winches to trailer winch stands where insufficient room and improper angle are present. Black powder-coated finish. Hardware included. Description: Angle mounting plate Sold: Each
|
|
462-16-24085 Fits 6-16 gauge wire. For 12Volt DC winches. : Sold: Each
|
|
462-16-24052 "For 120 volt AC StrongArm winch models. This kit provides a 10-foot remote hand-held switch unit which can be wired directly to the winch. (Plug-in connector #6373 is optional.) The pendant has an "in-off-out" switch similar to the power switch provided on all 120 volt AC StrongArm models. Individually packaged." : Sold: Each
|
|
462-16-24870 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for smooth, quiet operation. The final drive gears are heat-treated high carbon steel for maximum strength. Precision needle bearings are used in the high-load areas for low friction and long life. The one piece die formed base is made of heavy gauge steel. The stainless steel front frame protects the cable or strap from abrasion.
- Available in 120V AC or high torque 12V DC
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 25' Cable, Max Load: 3000 lbs, Amps: 70, Volts: 12
|
|
462-16-24872 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 25' Cable, Max Load: 2700 lbs, Amps: 8, Volts: 120
|
|
462-16-24874 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- Available in 120V AC or high torque 12V DC
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 50' Cable, Max Load: 4,500 lbs., Amps: 70, Volts: 12
|
|
462-16-24876 The D-L StrongArm Electric Winch gear train uses heat-treated sintered-iron gears for
smooth, quiet operation. The final drive gears are heat-treated high carbon steel for
maximum strength. Precision needle bearings are used in the high-load areas for low
friction and long life. The one piece die formed base is made of heavy gauge steel.
The stainless steel front frame protects the cable or strap from abrasion.
- 12V switch includes wiring harness, 25' positive battery wire and 8' ground wire
- High impact case provides excellent weather resistance and protection
- Attractive brushed stainless steel front plate for superior rust resistance
- Die formed base is adapted for quick mounting applications
- Cable hook safety snap keeps load securely attached
- Standard equipment includes an emergency crank handle
Description: 7/32" x 50' Cable, Max Load: 4000 lbs, Amps: 8, Volts: 120
|
|
462-16-25200 "12V Power-in and freewheel-out (TW4000), power-in power-out and freewheel-out (TW9000) operation with positive mechanical brake.
Clutch control knob engages gears or releases load in a controlled freewheel mode. For boat trailers and other horizontal pulling applications. Equipped with 20' x 2" polyester strap and hook.
Not for movement of humans." Max Load: 4000 lbs., Speed: 22 f.p.m. Sold: Each
|
|
462-313-P77712 Remote power-in/freewheel-out operation. With positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action and less amperage draw. Level wind system prevents snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit and remote control on-off lanyard. Includes hand crank, owner's manual, and a 50' cable fitted with safety hook. Models include pulley block for double line operation. 10" deep, 10" wide and 8" high. 2 Year warranty. Model: 712, Boat Size: 23', Max Load: 7,500 lbs., Speed: 14 f.p.m., Max Pull: Single: 2400 lbs./Double: 4300 lbs., Gear Ratio: 225:1 Remote power-in/freewheel-out operation with positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action, less amperage draw and level wind system to prevent snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit, remote control on-off lanyard, hand crank, owner's manual, cable with safety hook and a pulley block for double line operation. 10" deep, 10" wide and 8" high. 1 Year warranty. Not to used for lifting or as a hoist.
|
|
462-313-P77912 Remote power-in/freewheel-out operation. With positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action and less amperage draw. Level wind system prevents snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit and remote control on-off lanyard. Includes hand crank, owner's manual, and a 50' cable fitted with safety hook. Models include pulley block for double line operation. 10" deep, 10" wide and 8" high. 2 Year warranty. Model: 912, Boat Size: 30', Max Load: 11,500 lbs., Speed: 8 f.p.m., Max Pull: Single: 4000 lbs./Double: 7500 lbs., Gear Ratio: 450:1 Remote power-in/freewheel-out operation with positive lock when not winding. Easily operated with Tri-Matic Roll-n-Gage control. Efficient gear train system for smoother pulling action, less amperage draw and level wind system to prevent snarls and cable wear. Aircraft quality cable fitted with safety hook and super-tub ABS weather resistant housing. Comes with simple to install wiring harness with 80A circuit breaker. Hooks to any 12 volt auto or truck battery in minutes. Includes quick mount kit, remote control on-off lanyard, hand crank, owner's manual, cable with safety hook and a pulley block for double line operation. 10" deep, 10" wide and 8" high. 1 Year warranty. Not to used for lifting or as a hoist.
|
|
462-313-P55750 Wireless remote power-in, freewheel-out. 12V remote control trailer winch. Convenient light enclosed in the trailer winch casing. Emergency crank stored in winch casing. Not to be used as a hoist. Re-designed, stronger housing. Pulley block provides for double line applications. 60 amp standard wiring harness. Two year limited warranty. Model #: RC23, Boat Size: 23', Max Load: 7500 lbs., Speed: 14 f.p.m., Max Pull: Single: 2400 lbs. /Double: 4300 lbs., Gear Ratio: 225:1 Sold: Each
|
|
462-313-P55950 Wireless remote power-in, freewheel-out. 12V remote control trailer winch. Convenient light enclosed in the trailer winch casing. Emergency crank stored in winch casing. Not to be used as a hoist. Re-designed, stronger housing. Pulley block provides for double line applications. 60 amp standard wiring harness. Two year limited warranty. Model #: RC30, Boat Size: 30', Max Load: 11,500 lbs., Speed: 8 f.p.m., Max Pull: Single: 4000 lbs. /Double: 7500 lbs., Gear Ratio: 450:1 Sold: Each
|
|
462-313-P7160901AJ Includes thrust bearing, thrust washers, and springs. Description: Thrust Bearing Kit, Fits: 712A 912 T2400 T4000 ST712 VS190 AP3500 Sold: Each
|
|
