462-23-94017 Gives outboards and stern drives a performance boost, improving both stability and handling. The Hydro-Stabilizer outperforms ordinary flat hydrofoils by reducing drag when the hull goes on plane. Installs on a large variety of motor styles and sizes with included stainless steel bolts and lock nuts. Wings constructed of black molded plastic. The Hydro-Stabilizer quickly puts the boat on plane, and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on plane. The wings provide a smoother, more stable ride and reduce ventilation in turns. Description: Under 50 HP Sold: Each
|
|
462-166-440 The original hydrofoil. Molded in 2 pieces of guaranteed, unbreakable, high strength plastic. Each foil is designed to flex independently to absorb shock. Cuts fuel consumption, greater stability, consistent planing at lower RPM, faster out-of-the-hole performance, steadier turns, higher top-end speeds and lower bow rise at all speeds. Description: For most outboards 5 hp and up Sold: Each
|
|
462-166-460
- Reduces troll speed in "down" position; acts as a stabilizer in "up" position
- Maintains stability in bow-light boats
- Smooths out ride in rough water
- Reduces porpoising and cavitation
- Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
- Installs in 15 minutes
- Stainless steel mounting hardware and installation & operating instructions provided with each unit
- Size: Large, Fits: I/O's and outboards 50 hp and larger
|
|
462-166-461
- Reduces troll speed in "down" position; acts as a stabilizer in "up" position
- Maintains stability in bow-light boats
- Smooths out ride in rough water
- Reduces porpoising and cavitation
- Made of only highest quality stainless steel and marine aluminum; clear anodized aluminum finish
- Installs in 15 minutes
- Stainless steel mounting hardware and installation & operating instructions provided with each unit
- Size: Small, Fits: Outboard motors from 20 to 50 hp
|
|
462-23-94007 Gives outboards and stern drives a performance boost, improving both stability and handling. The Hydro-Stabilizer outperforms ordinary flat hydrofoils by reducing drag when the hull goes on plane. Installs on a large variety of motor styles and sizes with included stainless steel bolts and lock nuts. Wings constructed of black molded plastic. The Hydro-Stabilizer quickly puts the boat on plane, and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on plane. The wings provide a smoother, more stable ride and reduce ventilation in turns. Description: 50 hp & Up Sold: Each
|
|
462-779-SE200BLK High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength co-polymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA. Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation
- Manufacturer's lifetime warranty.
SE Sport 200 Application: 8 to 40 hp (will fit larger HP, except Mercury 40, 50, 60 Four Strokes). Dimension 13.5" x 14.3". Drill-Free installation with the optional Sport Clip.
|
|
462-779-SE400BLK "Drill-Free or Drill option
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
- Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- Silver trim covers all securing hardware
- Manufacturer's lifetime warranty
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17". Trim Covers™ for SE Sport 400: Available in Red, Blue, and Yellow, these covers offer an alternative to the standard silver which accompanies the SE Sport 400. " Description: SE Sport 400, 40-unlimited HP, Color: Black
|
|
462-779-SE300BLK "High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA. Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation
- Manufacturer's lifetime warranty.
SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP."" - Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation (SE 200 and SE 300)
- Manufacturer's lifetime warranty.
SE Sport 200 Application: 8 to 40 hp (will fit larger HP, except Mercury 40, 50, 60 Four Strokes). Dimension 13.5" x 14.3". Drill-Free installation with the optional Sport Clip. SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP." Description: SE Sport 300, 40-350 HP, Color: Black
|
|
462-779-SE400GY "Drill-Free or Drill option
High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA.
- Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- Silver trim covers all securing hardware
- Manufacturer's lifetime warranty
Recommended for outboards and sterndrives 40 to unlimited horse power. Exclusion: Volvos with the exhaust through the cavitation plate. For these sterndrives we recommend the Sport 300. Both drill (2 hold or 4 hole) and drill-free stainless hardware included. Simple and quick drill-free mounting with a common wrench or socket and screw driver. Proven Disk-Grips™ hardware for the drill-free attachment will not screw into or damage the edge of your cavitation plate. Does not require the Sport Clip for a drill-free installation. Dimension 16"x17". Trim Covers™ for SE Sport 400: Available in Red, Blue, and Yellow, these covers offer an alternative to the standard silver which accompanies the SE Sport 400. " Description: SE Sport 400, 40-unlimited HP, Color: Gray
|
|
462-779-SE300GY "High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA. Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation
- Manufacturer's lifetime warranty.
SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP."" - Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation (SE 200 and SE 300)
- Manufacturer's lifetime warranty.
SE Sport 200 Application: 8 to 40 hp (will fit larger HP, except Mercury 40, 50, 60 Four Strokes). Dimension 13.5" x 14.3". Drill-Free installation with the optional Sport Clip. SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP." Description: SE Sport 300, 40-350 HP, Color: Gray
|
|
462-779-SE300WHT "High Performance Hydrofoils streamlined for speed. The SE Sport will improve handling and provide better maneuverability with a smoother ride. Features Turbo Trac to enhance thrust and control. Crescent shaped surface quickly funnels water for more thrust-cutting planing time for the quickest hole shot. Cuts planing time dramatically and keeps the boat on plane at lower speeds while saving on fuel and providing better stability. Features high strength copolymer construction. Stainless steel hardware included. All hydrofoils and the Sport Clip are 100% molded, crafted, and made in USA. Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation
- Manufacturer's lifetime warranty.
SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP."" - Reduces or eliminates porpoising, cavitation, chine walking and deep-V wander
- Sleek shape complements today's new boat designs
- High Style Graphics molded in
- Exclusive "Site Gauge" template for easy installation (SE 200 and SE 300)
- Manufacturer's lifetime warranty.
SE Sport 200 Application: 8 to 40 hp (will fit larger HP, except Mercury 40, 50, 60 Four Strokes). Dimension 13.5" x 14.3". Drill-Free installation with the optional Sport Clip. SE Sport 300 Application: All outboards and sterndrives 40+ HP. For Volvo SX-A, DPS, DPR, DPH series and the Volvo 280 and 290 series, longer bolts and 1" fender washers are required. Will fit under Volvo's top mounted anode, by reversing anode to wide end forward. Not recommended for Volvo Ocean Series XDP. Dimension 14.5"x17". Drill-Free installation with the optional Sport Clip. Optional Drill Free Sport Clip Application: Attaches to the cavitation plate to mount the SE Sport 200 or SE Sport 300 without drilling holes. Fits most sterndrives and outboards 8HP to unlimited HP. Exceptions: Volvo with exhaust through the cavitation plate. Mercury Bravo II. Mercury Bravo III with only one anode on bottom of cavitation plate (rare). Honda 200 HP and higher. Yamaha 350HP." Description: SE Sport 300, 40-350 HP, Color: White
|
|
462-215-JR1 Reliable bolt-on hydrofoil gets boat up on plane faster, while bow rise is also reduced. Chinewalking, porpoising, and cavitation are no longer problems for boats with a StingRay Classic. True stabilization, performance enhancement, and increased fuel economy. Description: Junior, Fits: 1-1/2-40hp, Color: Black
|
|
462-215-JR2 Reliable bolt-on hydrofoil gets boat up on plane faster, while bow rise is also reduced. Chinewalking, porpoising, and cavitation are no longer problems for boats with a StingRay Classic. True stabilization, performance enhancement, and increased fuel economy. Description: Junior, Fits: 1-1/2-40hp, Color: White
|
|
462-215-JR3 Reliable bolt-on hydrofoil gets boat up on plane faster, while bow rise is also reduced. Chinewalking, porpoising, and cavitation are no longer problems for boats with a StingRay Classic. True stabilization, performance enhancement, and increased fuel economy. Description: Junior, Fits: 1-1/2-40hp, Color: Gray
|
|
462-215-STARFIRE1 The world's first No-Drill hydrofoil with an optional drill installation feature. This allows boaters to choose which installation method they prefer - No-Drill or Drill. The hidden, no-drill attachment results in no harm to the engine and the quickest and simplest installation process which requires only 2 set screws! Delta-Wing profile adds stabilization with its extended wing tips while the inverted trailing edge reduces drag. For boaters looking to get on plane in half the time, reduce bow rise, eliminate chinewalking, stop porpoising and cavitation, while at the same time allow for maximum top-end speed and increased fuel efficiency.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Fits: 40-350hp, Color: Black
|
|
462-215-STARFIRE2 The world's first No-Drill hydrofoil with an optional drill installation feature. This allows boaters to choose which installation method they prefer - No-Drill or Drill. The hidden, no-drill attachment results in no harm to the engine and the quickest and simplest installation process which requires only 2 set screws! Delta-Wing profile adds stabilization with its extended wing tips while the inverted trailing edge reduces drag. For boaters looking to get on plane in half the time, reduce bow rise, eliminate chinewalking, stop porpoising and cavitation, while at the same time allow for maximum top-end speed and increased fuel efficiency.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Fits: 40-350hp, Color: White
|
|
462-215-STARFIRE3 The world's first No-Drill hydrofoil with an optional drill installation feature. This allows boaters to choose which installation method they prefer - No-Drill or Drill. The hidden, no-drill attachment results in no harm to the engine and the quickest and simplest installation process which requires only 2 set screws! Delta-Wing profile adds stabilization with its extended wing tips while the inverted trailing edge reduces drag. For boaters looking to get on plane in half the time, reduce bow rise, eliminate chinewalking, stop porpoising and cavitation, while at the same time allow for maximum top-end speed and increased fuel efficiency.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Fits: 40-350hp, Color: Gray
|
|
462-215-JRXRIII1 Gets even the heaviest boats up on plane twice as fast with the industry's fastest hole shot and reduces bow rise. The unique design of the XRIII harnesses the prop-wash and creates a powerful, thrust-enhancing cone. Complete with full-surface graphic inlays, the XRIII is ideal for heavier boats needing greater lift, as well as boats pulling tubers, skiers, and wakeboarders! Chinewalking, cavitation, and porpoising are eliminated while boaters experience true stabilization, lift, and enhanced control of the boat. Plus, No-Drill installation is simple and quick!
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Description: Junior, Fits: 25-75hp, Color: Black
|
|
462-215-JRXRIII3 Gets even the heaviest boats up on plane twice as fast with the industry's fastest hole shot and reduces bow rise. The unique design of the XRIII harnesses the prop-wash and creates a powerful, thrust-enhancing cone. Complete with full-surface graphic inlays, the XRIII is ideal for heavier boats needing greater lift, as well as boats pulling tubers, skiers, and wakeboarders! Chinewalking, cavitation, and porpoising are eliminated while boaters experience true stabilization, lift, and enhanced control of the boat. Plus, No-Drill installation is simple and quick!
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Description: Junior, Fits: 25-75hp, Color: Gray
|
|
462-215-SRXRIII2 Gets even the heaviest boats up on plane twice as fast with the industry's fastest hole shot and reduces bow rise. The unique design of the XRIII harnesses the prop-wash and creates a powerful, thrust-enhancing cone. Complete with full-surface graphic inlays, the XRIII is ideal for heavier boats needing greater lift, as well as boats pulling tubers, skiers, and wakeboarders! Chinewalking, cavitation, and porpoising are eliminated while boaters experience true stabilization, lift, and enhanced control of the boat. Plus, No-Drill installation is simple and quick!
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
- Does not fit Volva Penta Engines w/exhaust thru the anti-cavitation plate.
- All No-Drill StingRay Hydrofoils have the patented No-Drill Technology designed into the hydrofoil and DO NOT need any type of adapter or additional pieces.
Description: Senior, Fits: 40-350hp, Color: White
|
|
