Electrical - Fuse Blocks

6 Gang ATO/ATC Fues Block w/Ground Bar

• For ATO/ATC fuses


• Interlocking modules snap together


• 1/4" tin plated copper tab terminals


• Rated 30 Amp per circuit, 160 amp max for block

Gang: 6, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3-3/4" x 3-1/4"

Sold: Each

Gang: 10, Fuse: ATO/ATC, Neg Bus: Yes, Size: 5" x 3-1/4"

Gang: 14, Fuse: ATO/ATC, Neg Bus: Yes, Size: 6-1/4" x 3-1/4"

Gang: 14, Fuse: ATO/ATC, Neg Bus: No, Size: 5-1/2" x 3-1/4"

Gang: 4, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3-1/2" x 3-1/4"

"Combination multiple gang fuse/terminal blocks. Can be used with 1/4" x 1-1/4" fuses for circuit distribution and also features separate grounding terminal bar. Fuses not included."

Gang: 6, Fuse: 3AG, AGC, SFE, Size: 4-1/2" x 3-5/16"

Sold: Each

"Combination multiple gang fuse/terminal blocks. Can be used with 1/4" x 1-1/4" fuses for circuit distribution and also features separate grounding terminal bar. Fuses not included."

Gang: 4, Fuse: 3AG, AGC, SFE, Size: 3" x 3-5/16"

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 12, Fuse: ATO/ATC, Neg Bus: No, Size: 3.32'' x 5.23''

Sold: Each

"Recommended for high speed circuit protection of electronic equipment such as inverters. Tin-plated copper bus and stainless steel hardware. 3/8" (M10) stud terminals. Clear insulation cover with breakouts allow cable access from all directions. Maximum ratings: 160 Volts DC."

Amps: 225-400, Fuse: Class T, Size: 7.0'' x 2.3''

Sold: Each

"Accepts wide range of ANL Fuse amperages for a versatile ignition protected fusing system. Tin-plated copper bus and stainless steel hardware. A 5/16" (M8) stud terminals. Insulation cover with breakouts allow cable access from all directions. Maximum rating: 32 Volts DC."

Amps: 35-750A, Fuse: ANL, Stud: 5/16" - 18 (M8)", Size: 7.0'' x 2.0''

Sold: Each

Tough, weatherproof Lexan material. Features 60 common DC labels. Used on all Contura waterproof breaker and fuse panels and ST blade fuse blocks. Black.

:

Sold: Each

Use with SFE, AGC, or MDL fuses up to 20 Amp
Common bus bar connects hot side of fuses for power feed
Separate bus bar for ground or unfused common hot feed
Brass fuse clips, 8-32 stud terminals

• Use with SFE, AGC, or MDL fuses up to 20 Amp


• Common bus bar connects hot side of fuses for power feed


• Separate bus bar for ground or unfused common hot feed


• Brass fuse clips, 8-32 stud terminals

Gang: 6, Fuse: SFE, AGC, MDL

Sold: Each

Use with SFE, AGC, or MDL fuses up to 20 Amp
Common bus bar connects hot side of fuses for power feed
Separate bus bar for ground or unfused common hot feed
Brass fuse clips, 8-32 stud terminals

• Use with SFE, AGC, or MDL fuses up to 20 Amp


• Common bus bar connects hot side of fuses for power feed


• Separate bus bar for ground or unfused common hot feed


• Brass fuse clips, 8-32 stud terminals

Gang: 4, Fuse: SFE, AGC, MDL

Sold: Each

Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.

Gang: 6, Fuse: AGC/MDL, Neg Bus: Yes, Size: 3.5'' x 5.0''

Sold: Each

Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.

Gang: 6 , Fuse: AGC/MDL, Neg Bus: No, Size: 3.5'' x 5.0''

Sold: Each

"Accepts wide range of ANL Fuse amperages for a versatile ignition protected fusing system. Tin-plated copper bus and stainless steel hardware. A 5/16" (M8) stud terminals. Insulation cover with breakouts allow cable access from all directions. Maximum rating: 32 Volts DC."

Amps: 35-300A, Fuse: ANL, Stud: 5/16" - 18 (M8)", Size: 4.5'' x 1.5''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 12, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 6.47''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 4.89''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: No, Size: 3.32'' x 3.65''

Sold: Each

Safetyhub 100 Fuse Block

• Sealed cover protects fuses from the harsh marine environment: IP66 rating


• Ignition protected fusing meets Coast Guard & ABYC requirements for installation on gas or diesel powered boats


• Meets ISO 8846 ignition protection, and SAE J1171 external ignition protection requirements

Size: 5.75" L x 3.9" W x 2.21" H"

Sold: Each