U-FLEX Marine Catalog - Hatch Lifts

Constructed from Anodized Aluminum and Stainless Steel/ According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installations for heavier loads. It is also possible to install more then two AV actuators in multiple applications. Use locking version in high performance applications.

• Maximum load for single installations: (120 kg - 265 lbs)
• Maximum load for dual installations: (240 kg - 529 lbs)
• Maximum load is recommended not to be exceeded.
• Supplied with all mounting hardware.
• Stainless steel telescopic ram for manual operation in case of emergency.
• Available on request without manual emergency opening device for high performance boats.
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
• IP 65 protection rated
• Speed: 25mm/sec no load applied, 17 mm/sec maximum load
• Current absorption in single installations: 10A at 12V, 5A at 24V
• Current absorption in dual installations: 20A at 12V, 10A at 24V
• AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved.

Constructed from Anodized Aluminum and Stainless Steel/ According to the load required, the AV hatch lifter can be mounted individually, or in twin cylinder installations for heavier loads. It is also possible to install more then two AV actuators in multiple applications. Use locking version in high performance applications.

• Maximum load for single installations: (120 kg - 265 lbs)
• Maximum load for dual installations: (240 kg - 529 lbs)
• Maximum load is recommended not to be exceeded.
• Supplied with all mounting hardware.
• Stainless steel telescopic ram for manual operation in case of emergency.
• Available on request without manual emergency opening device for high performance boats.
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position.
• IP 65 protection rated
• Speed: 25mm/sec no load applied, 17 mm/sec maximum load
• Current absorption in single installations: 10A at 12V, 5A at 24V
• Current absorption in dual installations: 20A at 12V, 10A at 24V
• AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved.

Ulysses 7" & 12" Stroke Hatch Lifter

• 7" Model Overall Length 19.2", 12" Model Overall Length 23.9", both 1.3" diameter
• Single installation only
• Pull and push maximum load: 144 lbs
• Pull and push maximum load is recommended not to be exceeded
• Supplied with all mounting hardware
• Aluminum ram
• Circuit breaker to stop accidental overloading of the system and electronic stop at closed or full open position
• IP 65 protection rated
• 12V DC