715-11211 Aeromotive 140 GPH Electric Fuel Pump
Looking for a good fuel pump for your boat? Aeromotive's marine fuel pumps
flow over 800 lbs./hr. for EFI engines (over 1,600 hp for naturally aspirated,
and up to 1,100 hp for forced air induction). These pumps provide continuous,
smooth fuel flow to keep you going on the water.
- Free Flow Rate 140 gph
- Maximum Pressure (psi) 14 psi
- Inlet Size 3/8 in. Female NPT
- Inlet Attachment Female threads
- Outlet Size 3/8 in. Female NPT
- Certified to ISO 8846, SAE J1171 & United States Coast Guard
Requirements for Ignition Protection & Fire Resistance.
|
|
715-11212 Aeromotive 90 GPH Electric Fuel Pump
- Free Flow Rate: 90 gph
- Maximum Pressure (psi): 7 psi
- Inlet Size: 3/8" Female NPT
- Outlet Size: 3/8" Female NPT
- Inlet Thread Diameter: 3/8"
- Outlet Thread Diameter: 3/11
Looking for a good fuel pump for your boat? Aeromotive's marine fuel pumps flow over 800 lbs./hr. for EFI engines (over 1,600 hp for naturally aspirated, and up to 1,100 hp for forced air induction). These pumps provide continuous, smooth fuel flow to keep you going on the water.
- Meets ISO 8846, SAE J1171, and USCG Requirement for Ignition Protection & Fire Resistance
- Internally regulated at 7 psi (draws less than 5 amps)
- Black base
|
|
715-11101 A1000 (Red) Fuel Pump for carbureted engines making up to 1300 HP and fuel injected engines up to 700 HP, forced air induction up to 1000 HP
- -10 AN inlet and outlet
- Flows 700 lbs/hour @ 13.5 volts @ 45 psi
Fuel injected engines:
- Up to 1300 HP for naturally aspirated
- Up to 1000 HP for forced air induction
Carbureted engines:
- Up to 1500 HP for naturally aspirated
- Up to 1200 HP for forced air induction.
The design of Aeromotive's in-line fuel pumps offer in-line cooling that extends the life of your boats fuel pump. Their innovative body design uses integrated cooling fins to deliver maximum cooling and integral mounting feet for no hassle installation. Every pump is tested for pressure, flow and current draw to ensure top performance of every configuration at the track, on the street or in the water. Pumps are certified to ISO 8846, SAE J1171, and U.S. Coast Guard requirements for ignition protection & fire resistance. A new black anodized marine pump is offered with a two year warranty standard.
Note: Compatible with all pump and racing gasoline and high grade diesel fuels.
|
|
715-11102 Aeromotive 1000 Superpump Fuel Pump Pro-Series (Black) Fuel Pump (Formerly Silver)
Specifications:
- -12 AN inlet and outlet ports
- Includes two -12 AN tapered flare fittings and O-rings
- Flow exceeds 1000 lbs/hour @ 13.5 volts/45 psi
- Indestructible electroless nickel finish
Carbureted engines:
- Up to 2600 HP for naturally aspirated
- Up to 2000 HP for forced air induction
- High Horsepower Racing Engines, EFI or carbureted making up to 1700 HP
- Fuel Injected Engines: up to 1400 HP
- Forced Air Induction Engines; carbureted up to 2100 HP
- Naturally Aspirated Fuel Injected up to 1800 HP
The design of Aeromotive’s in-line fuel pumps offer in-line cooling that extends the life of your boats fuel pump. Their innovative body design uses integrated cooling fins to deliver maximum cooling and integral mounting feet for no hassle installation. Every pump is tested for pressure, flow and current draw to ensure top performance of every configuration at the track, on the street, or in the water. Pumps are certified to ISO 8846, SAE J1171, and U.S. Coast Guard Requirements for Ignition Protection & Fire Resistance.
|
|
715-11108 M1000 (Black) Fuel Pump for carbureted engines making up to 1300 HP and fuel injected engines up to 700 HP, forced air induction up to 1000 HP
HP Marine USCG Fuel Pump Features:
- Three years of research into composite materials, coatings, and electric motor technologies
- The only pump to flow such volume at the high pressures required
- Continuous-run rated
- Compatible with all pump and race gas, including EPA oxygenated and high-grade diesel
- Meets ISO 8846, SAE J1171 & US Coast Guard requirements for ignition protection & fire resistance
- Hard coat anodized (black) for superior surface protection
HP Marine Fuel Pump #027-11108 Specs
- -10AN inlet and outlet
- Flow exceeds 700 lbs/hour @ 13.5 volts @ 45 psi
Carbureted engines:
- Up to 1500 HP for naturally aspirated
- Up to 1200 HP for forced air induction
Fuel Injected engines:
- Up to 1300 HP for naturally aspirated
- Up to 1000 HP for forced air induction
Note: Compatible with all pump and racing gasoline and high grade diesel fuels.
The design of Aeromotive's in-line fuel pumps offer in-line cooling that extends the life of your boats fuel pump. Their innovative body design uses integrated cooling fins to deliver maximum cooling and integral mounting feet for no hassle installation. Every pump is tested for pressure, flow and current draw to ensure top performance of every configuration at the track, on the street or in the water. Pumps are certified to ISO 8846, SAE J1171, and U.S. Coast Guard requirements for ignition protection & fire resistance. A new black anodized marine pump is offered with a two year warranty standard.
|
|
715-11203 Aeromotive Street/Strip & High-Output Fuel Pumps
For carbureted power plants making 200-750 HP with standard regulators and up to 1,000 HP with dynamic, bypass style regulators. Ideal for continuous duty, carbureted applications where more line pressure, flow volume and reliability are desired.
- For carbureted engines making 200 to 750 HP with a standard regulator
- 14 psi (draws less than 5 amps)
- Flows 140+ gph at 13.5 volts
- Compatible with alcohol
- Red base
|
|
620-8975 Fuel Pump Relay Kit
This Hardin Marine kit is intended primarily for those application running an electric fuel pump. The long wire runs in these kinds of installations can sometimes result in a voltage drop at the electric pump. Installation of this kit is good insurance that the fuel pump will be receiving full voltage from the battery.
Features:
- Can be used with any electric fuel pump, as long as the current load is not above 30 amps
- 30 amp relay is included with a relay socket wired with long leads specifically designed to reduce the number of splices required
- Quality insulated crimp connectors are provided to make the necessary splices, where required.
The units are for competition use and are not USCG approved.
- Detailed instruction included
|
|
