Stainless Steel Oil Filter Bypass Eliminator - BBC Gen 4 and SBC

This strong stainless steel mount does not have a bypass so it eliminates the possibility of unfiltered oil entering the engine while replacing the weak and often failed factory unit.

When a marine engine is installed in the bilge of a boat there is little or no access to the bottom of the engine therefore a remote mounted oil filter is required.  An oil filter block off adapter must be bolted on the original oil filter location to accomplish this.  These block off adapters are constructed of stainless steel.  They are completely O-ringed on the sealing surfaces to eliminate oil leaks, copper sealing washers are NOT used under the mounting bolt heads.

This beautifully polished CNC crafted billet aluminum Fuel/Water separator filter kit is the perfect solution for standard and entry level performance marine engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of the included WIX #692-33405 fuel/water separator filters. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 1"-14 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Kit Includes popular WIX #692-33405 filter

This beautifully polished CNC crafted billet aluminum Fuel/Water separator filter mount is the perfect solution for standard and entry level performance marine engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of the popular WIX #692-33405 fuel/water separator filters. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 1"-14 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Accepts popular WIX #692-33405

• 7-3/4" tall.
• Fits 625-7660 Extreme SS Filter Head.
• 1"-12 thread

Stainless Steel OEM Replacement Filter and Mounting Head

This unit is a perfect economical upgrade for a mildly modified marine engine. Each stainless steel mounting head features larger than stock 3/8" NPTF fuel inlets and outlets allowing a 15% increase over original equipment versions. This unit uses a high quality OEM replacement filter for easy serviceability.

Xtreme Remote Vertical Bulkhead Mount HP4 or HP6 Oil Filter Head - Polished

The feature that sets this remote mount oil filter apart from the competition is the variety of mounting locations made available by using different mounting brackets Normally mounted horizontally on the rear of the port cylinder head this remote oil filter mount can also be mounted vertically on the front of the port cylinder head or remotely mounted vertically on a nearby bulkhead. Incorporating a large single 3/4" NPT inlet port and dual 3/4" NPT outlet ports the oil lines can be run straight thru or 90 degrees from each other There is also an 1/8" NPT port in the filter head that can be used as a oil pressure gauge access point of plugged if it's not needed Constructed for 316L Stainless Steel and polished to a mirror finish the construction and appearance of this assembly top notch just like all of the Hardin Marine product line.

Xtreme Remote Horizontal BBC Rear Port Cylinder Head Mount HP4 or HP6 Oil Filter Head
New: Now With Engine Lifting Eye

The feature that sets this remote mount oil filter apart from the competition is the variety of mounting locations made available by using different mounting brackets Normally mounted horizontally on the rear of the port cylinder head this remote oil filter mount can also be mounted vertically on the front of the port cylinder head or remotely mounted vertically on a nearby bulkhead. Incorporating a large single 3/4" NPT inlet port and dual 3/4" NPT outlet ports the oil lines can be run straight thru or 90 degrees from each other There is also an 1/8" NPT port in the filter head that can be used as a oil pressure gauge access point of plugged if it's not needed Constructed for 316L Stainless Steel and polished to a mirror finish the construction and appearance of this assembly top notch just like all of the Hardin Marine product line. Fits Big Block Chevy cylinder heads.

HP4 Oil Filter Screen

These high flow stainless steel oil filter screens were designed to provide fast easy access engine oiling system inspection. Each high quality stainless steel screen sandwiches between the engine oil filter and filter head. Simply spin off your oil filter provides easy access to the filter screen.

Vertical Mount Oil Filter head and Bracket for Big Block Chevrolet - Polished

This is the perfect vertical mount oil filter solution that the industry has been looking for now for years. A bracket that clears Standard Bravo exhaust tail pipes yet keeps the filter easily accessible from the rear side of the engine. The Stainless Steel oil filter head can be mounted conveniently in a vertical upward layout or vertical downward configuration. The 6061-T6 billet aluminum bracket also features an engine lifting ring located for service needs. The bracket can be mounted on the front or rear of the engine to the factory cylinder head mounting holes (3/8") and is supplied with aluminum and stainless steel mounting hardware. The filter head accepts popular GM oil filters with HP4 such as Moroso #22460 or HP6 filters.

This beautifully polished CNC crafted billet aluminum HP Fuel/Water separator filter kit is the perfect solution for standard and entry level performance marine engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of the included FST fuel/water separator filters. The FST Performance RF500M fits the OEM Mercury racing filter head as well as the Hardin Marine Billet fuel / water separator head #625-7667. This filter removes contaminates downto as small as 3 Microns while separating water, with a flow rate of up to 200 GPH flow with less than 1% pressure drop at 75psi through 579 sq.in. of filter material. Hose and fittings not included.

• Ideal for Marine fuel/water Separator applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 2 Plugs Included
• 1"-14 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Kit Includes HP FST RF500M filter

This beautifully polished CNC crafted billet aluminum HP1 oil filter mount is the perfect solution for standard and entry level performance marine engines. This unit features 1/2"NPT inlet/outlet ports on either side for convenient fuel system plumbing and return. Sturdy one piece billet construction allows easy remote mounting of the popular 740-22460 filters. Hose and fittings not included.

• Ideal for HP4 Oil Filter applications 
• CNC-machined from billet 6061-T6 aluminum 
• High-Flow Design 
• 13/16-16 Thread 
• 1/2" NPT Inlet/Outlet ports 
• Accepts popular 740-22460 filter