S-Pipe Hose & Clamp Kit (pair)

Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits Large 2.5" ID / 3" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Two high pressure flexible hoses with pre-crimped brass fittings, bulkhead fittings (for KIT OB-BHBR only) and bend restrictors on one end. Recommended for use with all Uflex helms with 1500 psi relief valves.

Two high pressure flexible hoses with pre-crimped brass fittings, bulkhead fittings (for KIT OB-BHBR only) and bend restrictors on one end. Recommended for use with all Uflex helms with 1500 psi relief valves.

This hard wall water hose is used in many marine applications and is designed to last in harsh environments.

Water hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

This hard wall water hose is used in many marine applications and is designed to last in harsh environments.

Water hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

This hard wall water hose is used in many marine applications and is designed to last in harsh environments.

Water hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

This hose is designed to go from your bilge pump to your water dump It is flexible and easy to route.

Water bilge hose is sold by the foot, i.e add quantity of 6 for 6 ft. of hose.

Hose comes in maximum of 50 feet sections. Please specify if you want sections cut into specific lengths when ordering over 50 feet.