Glenwood Exhaust Systems - Tailpipes & Risers

O2 Spacer, For Common Log Style Exhaust manifolds

This Unique 1" thick adapter plate provides an installation option for retro fitting a Oxygen sensor and or air fuel ratio gauge for tuning purposes Into the most common Log Manifold style exhaust systems. The part is manufactured from Aluminum and is not treated with any corrosion resistance. Designed to accept popular 18MM O2 Oxygen sensors.

TECH NOTE: Will O2 Sensors Work In marine exhaust systems?

YES FOR TUNING but they have limitations as water / moisture is a byproduct of combustion. Often boaters find there is moisture in their exhaust system that have collected or made their way inside of what is better known as the "DRY" exhaust stream of their exhaust system. Anything from steam like to little water droplets about 1/32" all around the inside of the exhaust. This is because water IS a by product of combustion. same thing you see on a cold morning behind cars. sometimes you see water dripping out.

Don't take our word for it ask a real rocket scientist: https://www.grc.nasa.gov/www/k-12/airplane/combst1.html

This is why O2 Sensors are great for tuning but have a limited long term life span unless protected by Catalytic converters like on New Marine engine offerings. So you know gas is known as a hydrocarbon based fuel. And we all know what hydro means WATER.

• For Log Manifolds 
• 5" Outside Diameter 
• 3" Inside Diameter 
• 1" Thick
• 18MM O2 hole
• 2-15/16" Bolt Hole to Bolt Hole (Adjacent)
• 4-1/8" Bolt Hole to Bolt Hole (Across)
• Mounting Hardware is NOT INCLUDED
• Riser Gaskets sold separately (500-718) 2 Required
• Stainless Steel 18MM Oxygen Sensor Plug sold separately (620-50031) 1 Required
• Sold Each

• For Log Manifold O2 spacer 620-32435 
• Includes 4 studs, 4  washers, and 4 nuts, all 5/16"
  

Large Risers 12" x 13" (pair)

These are water cooled log style risers designed to bolt to log manifolds. These risers are available in two different sizes To help in fitting different applications. These large risers have a 3" exhaust inlet port. NOTE: These risers do not have the mounting holes drilled to allow the customer to clock the risers to whatever angle they choose.

Log Riser Stainless Steel Stud Kit For Pair Of Manifolds

This stud kit is used for attaching the log riser to the log manifold. Theirstainless steel construction will provide long life and resist corrosion Kitincludes: (8) studs, (8) washers, (8) nuts. Studs are 5/16-18" and 1-3/4" long.