This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The Xtreme Flush Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 1/4” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.
These LED's are for 12 Volt systems ONLY.
5mm Flush Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> The
Xtreme Panel Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of
Electro-polished Stainless Steel for maximum corrosion resistance and
easily mount in the dash panel through a 1/4” diameter hole and will
conveniently wire up to your switch to indicate when the switch is on.
They are available in Red and Blue and are wired for a 12V. system.
These LED's are for 12 Volt systems ONLY.
5mm Panel Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Insert the LED thru the drilled hole and push the O-Ring onto the LED
body. Then push the retaining ring onto the LED forcing it to compress
the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Colored Gauge Bulb Covers, available in Red, Blue, Green, and Yellow. Goes over Standard gauge bulb used in Autometer, Hardin, etc... gauges. Note Livorsi gauges use LED lights and these will not work with them or any other gauge that uses LED's. Comes in packs of 3.
|
|
516-9850-0001 Dimmer Switch
This dimmer box will dim the LED light brightness for night operation
|
|
730-LEDW + Option(s) LED Lights for Livorsi Gauges, Wedge Style. 12.8v. LED lights outshine and outlast incandescent bulbs. NOTE: These do not work with standard DC/DCS 2-1/16" or 2-5/8" gauges. On those gauges the led is soldered to the circuit board. These lights only work on Tachs and Speedos.
|
|
620-8965 Amber LED Indicator Light, 5/16 Mounting Hole, 12 Volt A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.
|
|
620-8960 Green LED Indicator Light, 5/16 mounting hole, 12 Volt A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.
|
|
464-203293 #37 CLEAR/SIDE LIGHT Black/RED
Wesbar #37 Series Waterproof Side/Clearance Marker Lights are compact lights with a polycarbonate lens that is sonic welded to the base. They have Snaplock tabs to secure the light to the base and features a self-grounding base on metallic surfaces. When mounted correctly, these lights comply with FMVSS/CMVSS 108 requirements.
Features:
- Size: 2-1/2" x 1-1/4"
- Includes wire, mounting screws and gasket
|
|
464-203396 #37 Replacement Light Module Red
Wesbar #37 Series Replacement Light Modules are sonically sealed polycarbonate lenses that are impact resistant and waterproof. They replace the light module on #37 Series side/clearance lights. Available in red and amber and come with a 1 year limited warranty.
|
|
464-441090-1 Bulb Double Bayonet 7.5W 13V
The Seadog Double Contact Bayonet Base Light Bulbs have a nickel plated brass base.
- Length: 1-7/8"
- Diameter: 1"
- Volts: 12.8
- Watts: 13.3
|
|
464-441003-1 Bulb Single Bayonet .94A 12.8V
The Seadog Single Contact Bayonet Base Light Bulbs have a nickel plated brass base.
- Candle Power: 15
- Size (In.): 1-5/8" x 3/4"
- Amps: .94
- Volts: 12.8
|
|
464-441194-1 Bulb Wedge Base 12V 3.8W
The Seadog Wedge Light Bulbs have a glass, wedge style base.
- Size: 1"L x 3/8"W
- Amps: .27
- Volts: 14
- Watts: 3.8
- Candle power: 2
|
|
464-441906-1 Wedge Base Light Bulbs
- Size: 1-3/8"L x 9/16"W
- Amps: .69
- Volts: 13
- Watts: 9
|
|
464-441004-1 Bulb Double Bayonet 12W 12.8V
The Seadog Double Contact Bayonet Base Light Bulbs have a nickel plated brass base
- Length: 1-3/4"
- Diameter: 3/4"
- Volts: 12.8
- Watts: 12.0
|
|
