513-20-LP-FM-SC-WHT PlashLights 20W LED light is the perfect flush mounted light for a hard top canopy on a boat. Built for marine applications. This light is TWICE as bright as our competition.
FEATURES:
- (2) 10W CREE® OSLON LX ECE LED’s = 20W Per Light
- 2,800 Lumens / each
- 9-36 Volt DC
- 1.6A @ 12VDC
- IP69k Rated
- Extruded aluminum body with DuPont® coating
- Durable scratch resistant high impact polycarbonate lens
- 96% optical/reflector efficiency
- Genuine Gore® waterproof membrane with mechanical seal
- Deutsch® waterproof connectors
- Over / Under and reverse polarity protection
- Protected against electromagnetic (EMC) and radio frequency interference (RFI)
- LED Lifespan: 50,000 hours or 5 years of continuous use
- Operating Temp: -40°F ~ +145°F
- 316 Stainless Steel hardware and fasteners with nylon locking nuts
- 8.6g vibration compliant
- CE and RoHS certified
- Gasket and mounting hardware included
- Includes 1 Light, 9ft Pigtail of Power Wire, Gasket, Security Hardware with Security Wrench
|
|
513-SPRD-48-CW-WHT PlashLights 48W Low Profile Marine LED Spreader Light is the perfect LED light for your boats deck or work area! This light is extremely durable. Tested and designed for saltwater applications. This small 48W light is available in 160° wide flood beam pattern.
FEATURES
- 3,840 Lumens
- 48 X 1W OSRAM® LED’s = 48W Total
- 160° Wide Flood Beam
- 10~30V DC
- 3.2A @ 12V DC
- IP67K Rated
- Chrome Coated 304 Stainless Steel Bracket With Nylon Locking Nuts
- 18" Power Wire for easy Install - No Connector
- LED Lifespan: 50,000 hours or 5 years of continuous use
|
|
513-PL-PFL50
Marine Rated 50W LED Flood Light is designed for harsh environments and engineered to withstand the corrosion and vibrations associated with fishing boats, tugs, the beach, harbor, piers, aquarium, underwater, etc. Manufactured with the highest quality components to ensure the lights longevity.
FEATURES
- Power: 50W
- Beam Angle: 90 degree
- IP Rating: IP66 waterproof & Salt Spray Proof
- CCT: 5000K
- Input Voltage: 90-295V AC
|
|
513-DL-CAPELLA-28 Color changing marine RGB ceiling down light with a 316 Stainless Steel face, and Aluminum CNC machined body. Ideal multi-colored lighting for a boat hard top, deck, soffit, outdoor bar,
- Tempered Glass Lens
- 12V DC Input Voltage
- RGBW Color Options - White (W) is 5500K Cool White
- 28° or 58° Beam Angle
- Solid Passivated (Anodized) Aluminum CNC Machined Housing
- 316 Stainless Steel Trim
- Spring Loaded Tabs for Easy Installation
- Class III Insulated
- 3 Watt Total
- IP67 Rated
- 3ft of Black Insulated Power Wire
- ** RGBW Controller Sold Separately **
|
|
513-PL-DP-27W-1/2-BL Our high intensity LED drain plug lighting allows for a simple installation for underwater lights in a standard 1/2" or 3/4" NPT drain thread. Each light is built with a 60" wire tail and a simple two wire (red & black) wiring configuration unless you choose RGB. Then it must utilize an RGB controller (sold separately) to provide the ability to change colors, patterns, etc. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the 316 stainless steel housing, but more importantly when you turn this light on you will see the quality by the light output.
Easy way to add some safety for:
- Night activities
- Swimming
- Safety for loading and unloading at night
- Great for attracting fish on your evening trips
- Easily be seen out on the water
- Extreme intensity for showing off anytime of the day
- An easy way to help your sight when loading / unloading on lifts in the dark
What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.
FEATURES
- 3,250 Lumens MAX (each color varies)
- 30° Emitting Angle
- Fits standard 1/2" or 3/4" NPT drain opening
- Input Voltage: DC 12V (9V to 32V Max.)
- Current Draw: 2.2A @ 13.5VDC
- 50,000+ Hour Life
- 316 Stainless Steel Housing (Polished)
- Factory Sealed Housing - IP68 Rated
- Lifetime Warranty
- Underwater Use Only
- RGB Controller Sold Separately
- Includes one (1) light with 5ft of power wire
|
|
This Part has options, please click the button below to order.
513-UL-1014 + Option(s)
The Gravity LED Deck Lights feature a machined aluminum housing are surface mounted to the substrate. No need to core a hole. Just run your wire, connect, and fasten to the fiberglass roof or wall of your boat. This unique aspect of the Gravity LED lights makes it a favorite for boat builders.
With the housing being the same for each model, we give you the option to pick and choose which faceplate you would like such as Dome, Surface Mounted, Flush Mount, and Eyelid. Each faceplate is available in stainless steel, white, and black housing as well as the LED colors are blue, green, red, cool white, warm white, and RGB.
FEATURES
- 105 Lumens
- Power: 1.2W
- Input: DC12V~DC24V
- IP Rating: IP67
- Amp Draw: 0.2A @ 12VDC
- Lamp type: 1PC x 1W OSRAM LED
- Temperature Color: BLUE
- Beam Angle: 120 Degrees
- Power Wire: 9ft of Copper Tinned Wire, Black Insulated Jacket
- Warranty: Lifetime
|
|
513-UL-1014-DOME-RGB-SS The Gravity LED Deck Lights feature a machined aluminum housing are surface mounted to the substrate. No need to core a hole. Just run your wire, connect, and fasten to the fiberglass roof or wall of your boat. This unique aspect of the Gravity LED lights makes it a favorite for boat builders.
With the housing being the same for each model, we give you the option to pick and choose which faceplate you would like such as Dome, Surface Mounted, Flush Mount, and Eyelid. Each faceplate is available in stainless steel, white, and black housing as well as the LED colors are blue, green, red, cool white, warm white, and RGB.
- Input: DC12V~DC24V
- Power: 1.2WAmp
- Draw: 0.2A @ 12VDC
- Lamp type: 1PC x 1W OSRAM LED
- Temperature Color: RGB (Red, Green, Blue)
- Beam Angle: 120 Degrees
- IP Rating: IP67
- Power Wire: 9ft of Copper Tinned 4 Conductor Wire, Black Insulated Jacket
- Warranty: Lifetime
- RGB Controller is Sold Separately.
|
|
513-PL-LZR-HH
Plashlights NEW Handheld Spotlight with a laser chip shines 20,000 LUX of super-bright light up to 5 MILES!!! Do you really need to see miles away... probably not, but man is this light fun!
Great for hunting, marine, fishing, camping, hiking or anytime you need to mess with your neighbors. Battery life is about one hour of constant usage and rechargeable in just over two hours. The laser spotlight is constructed with impact resistant polymer body and ergonomic pistol grip.
Includes:
- Hard Carrying Case with dense foam inserts
- 2 Batteries (gun clip style)
- 1 x Spotlight
- 1 x Charging Cord (requires USB)
Specifications:
- Illumination Distance = 26,250 feet (almost 5 miles) *This is the maximum distance in perfect conditions that 1 lux can be measured. Average distance of visible light is 2-3 miles.
- Run Time = High: 1 Hour / Low: 2.5 Hours
- Charge Time = 2 Hours
- Function: High/Low/Off
- Waterproof Rating: IP65
- Beam Pattern: 2.5 degree (tight spot beam)
- Easily Change the Battery on the Go
- Light Weight at 15 oz
|
|
513-DL-1014-CW Powerful, yet small & unobtrusive each CREE LED module provide an oval shaped beam with a sharp cut-off designed to obtain non-overbearing illumination with a high degree of uniformity, minimal glare, nil light spill. The rail lights can be installed in new handrail or retrofitted into existing ones. Eliminating the need to light an entire area, the lit handrail helps to increase safety & security at minimal cost.
With stainless steel body & IP67, it is well-suited for Interior/ Exterior staircase, Marine T-Tops and pipe, Docks, Outdoor bars and Walkways. It provides decorative lighting when incorporated into the structure, enhancing aesthetics and increasing visibility.
FEATURES
-
95 Lumens Max
-
Power:1.5W
-
Input:24VDC
-
IP67 Rated
-
Beam Angle: 30° (Tilt & Pan) / 60°
-
Material: Stainless Steel 304
-
Available Color: Red, Blue, 6000k Cool White, 3000k Warm White , and 2700k Warm White. Some colors may only be available by special order.
-
Teflon Cable
-
PC Spring for Recessed Installation and Isolation of Dissimilar Metals
-
SS304 clip for easy removal
-
O-Ring PMQ Silicone Seal
-
242.5 lbs Max Weight Capacity
-
VHF & AIS Safe
-
Ce and RoHS Certifies
|
|
This Part has options, please click the button below to order.
513-RS-CW + Option(s) Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.
Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.
This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation. Mounting hardware sold separately.
Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.
Dimensions: 3/4" WIDE (18mm) x 1/2" TALL (12mm) x LENGTH ORDERED
Specifications:
- IP68 Waterproof
- Fully Potted - UV Rated
- 9ft. Black Insulated Power Cord Included
- 12 Volts DC Input
- Amp Draw: 0.275A / per foot @ 12V
- High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
- 30,000 Hours Expected Lifetime
- Extremely Durable
- Mounting Tab on Each End
- PlashLights Full Lifetime Warranty
- 6000K Cool White
*NOTE - Over voltage will permanently damage the light strip (15+ V)
* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.
|
|
This Part has options, please click the button below to order.
513-RS-RGB + Option(s) Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.
Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.
This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation. Mounting hardware sold separately.
Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.
Dimensions: 3/4" WIDE (18mm) x 1/2" TALL (12mm) x LENGTH ORDERED
Specifications:
- IP68 Waterproof
- Fully Potted - UV Rated
- 9ft. Black Insulated Power Cord Included
- 12 Volts DC Input
- Amp Draw: 0.275A / per foot @ 12V
- High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
- RGB Multi Color Light
- 30,000 Hours Expected Lifetime
- Extremely Durable
- Mounting Tab on Each End
- PlashLights Full Lifetime Warranty
*NOTE - Over voltage will permanently damage the light strip (15+ V)
* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.
|
|
This Part has options, please click the button below to order.
513-RS-RGBW + Option(s) Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.
Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.
This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation. Mounting hardware sold separately.
Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.
Dimensions: 3/4" WIDE (18mm) x 1/2" TALL (12mm) x LENGTH ORDERED
Specifications:
- IP68 Waterproof
- Fully Potted - UV Rated
- 9ft. Black Insulated Power Cord Included
- 12 Volts DC Input
- Amp Draw: 0.275A / per foot @ 12V
- High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
- RGBW Multi Color Light
- 30,000 Hours Expected Lifetime
- Extremely Durable
- Mounting Tab on Each End
- PlashLights Full Lifetime Warranty
*NOTE - Over voltage will permanently damage the light strip (15+ V)
* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.
|
|
513-PL-NEON-MEGA-12V-1FT Neon style LED strip lights designed for any harsh environment outdoor application such as a boat or a commercial building like a restaurant or casino. This LED neon will not yellow or crack over time. Super bright LED's, using 12V or 24V power. Side shooting LED's give these lights 120° of projection range, a large area of illumination. Mega Neon Flex strips are ideal for decorative exterior accent lighting. Durable and longer lasting, IP68 rated waterproof. These lights are so waterproof that they could be mounted underwater permanently (Not in a swimming pool of course as they are not UL Listed for that application). Create a stunning lighting affect that will last and make your project stand out with no "dot dot dot" or pixels.
FEATURES:
- RGB
- Constant Voltage
- 12V DC
- 15W/M
- Size: 16mm*15mm(W*H)/0.63''*0.59''(W*H)
- 84LED/M
- Lumileds 5050
- Vertical Top Bending
- 10" Open Wire from Both Ends
- Wire exit can be custom: Front / Side / Bottom Cable Entry
- IP68 Rated - Completely Filled
- Integrated Endcap
- Max Run Length 5M
|
|
513-PL-NEON-MEGA-RGBW-1FT Neon style LED strip lights designed for any indoor or outdoor application. Super bright LED's, using 24V power. Side shooting LED's give these lights 120° of projection range, a large area of illumination. Mega Neon Flex strips are ideal for indoor use, in kitchens, bar, under cabinets, or as a workbench light. Durable and longer lasting, IP-67 rated waterproof, makes The Mega Neon Flex a ideal solution for swimming pools, or restaurants. Waterproof and weather resistant, they are also soft and flexible easily bendable to create different shapes and patterns. Create a stunning lighting affect almost anywhere.
FEATURES:
-
MEGA 1615
- RGBW (W=2700K)
- Constant voltage
- DC24V
- 15W/M
- Size: 16mm*15mm(W*H)/0.63''*0.59''(W*H)
- 96LED/M
- Lumileds 5050
- Vertical Bending
- 30cm Open Wire from Both Ends(Front / Side / Bottom Cable Entry)
- IP67
- Integrated Endcap
- Max Run Length 5M
|
|
This Part has options, please click the button below to order.
513-RS-WW + Option(s) Waterproof LED Channel is a Linear LED light bar fixtures that is a very versatile solution for a variety of lighting needs. This includes under gunnel lighting for boats, hatch lighting, cutting board work areas, tool box lighting, cabinet lighting, under-cabinet lighting, desk lighting, bookshelf lighting, showcase lighting, truck bed lighting, RV ceiling lights, and many more.
Aluminum channels are a crucial part of any linear LED fixture. They act as a durable, lightweight housing for LED strip lighting of any color temperature, color, or output. Most importantly they act as the primary source of thermal management for your LED strips.
This 3/4" wide aluminum LED light bar emits up to 710 lumens per foot and is available in many color options as well as RGB, dual-color, and custom OEM designs. This waterproof light fixture has 12 VDC operation and is equipped with a 3 ft black insulated power wire on one end and mounting tabs on both ends for easy installation. Mounting hardware sold separately.
Great for: Boats, Docks, Outdoor Bars & Patios, Bathrooms, Kitchens, Swimming Areas, Steps, Coves, Under Cabinets, Side by Sides, Work Trucks, Tool Boxes, Truck Beds, Amp Steps.
Dimensions: 3/4" WIDE (18mm) x 1/2" TALL (12mm) x LENGTH ORDERED
Specifications:
- IP68 Waterproof
- Fully Potted - UV Rated
- 9ft. Black Insulated Power Cord Included
- 12 Volts DC Input
- Amp Draw: 0.275A / per foot @ 12V
- High Quality / High Output LED's - Will Not Go Out Premature (Like Others)
- 30,000 Hours Expected Lifetime
- Extremely Durable
- Mounting Tab on Each End
- PlashLights Full Lifetime Warranty
- 3500K Warm White
*NOTE - Over voltage will permanently damage the light strip (15+ V)
* It is recommended to secure (fasten or embed in silicone) the center of the longer aluminum channels to prevent movement.
|
|
513-LG08S0612-RGB Designed to be installed in the Mercury 450 Engine Cowling opening to provide a continuous dot-free glow.
- IP67 Rated
- Dot-free Illumination
- 12V DC Input
- 2.5 Watts - 30 Diodes
- 500 Lumens
- Side View: Horizontal Bending
- 3ft Black Insulated Power Wire
- RGB Controller Required (Sold Separately)
- UV & Saltwater Rated
- VHF & AIS Safe
- PLASH Lifetime Warranty (restrictions apply)
- Sold Individually
- Requires RTV Silicone
(Sold Separately) to be embedded in to be installed
NOTE: Each engine requires a quantity of 2 LED neon strips. Sold Individually.
|
|
513-ORB-NEON-RGB-12V-1FT Perfect for Hard Tops. Side Bending Directional Light that is DOT FREE. Salt Water Rated. Add some LED Neon lighting to your pontoon boat, fishing boat, center console, yacht, and more with PlashLights' waterproof multi color changing RGB neon strip lights!
|
|
513-CL-PADRE-BL PLASH Multi-Color Courtesy Light for Boats, Carbon Fiber Cover, Edge Emitting LED Light with 135° of Downward Facing Color Changing RGB Light, UV Rated, Completely Waterproof.
FEATURES
- 124 LUMENS
- Low Power Consumption (1W)
- 10~28 Volt Input Range
- IP67 Rated - Fully Waterproof
- Carbon Fiber Cover Plate Snaps on Once Light is Installed
- Single Color or RGB
- Reverse Polarity Protected
- Pulse Width Modulation/ Dimming Compatible
- Includes (1) Padre Courtesy Light
- Includes (2) #6 x 1/2” Philips Head 18/8 Stainless Steel Fasteners
- 2ft Power Wire (Copper Tinned)
- Instructions
|
|
This Part has options, please click the button below to order.
513-XX + Option(s)
- Curved Housing
- 5W OSRAM® OSLON LX ECE LED’S
- Extruded 6063 Aluminum Body
- AkzoNobel® Marine Polyester Powdercoat Coating
- Available in White or Black
- Durable Scratch Resistant High Impact Polycarbonate Lens
- 316 Stainless Steel Hardware and Fasteners with Nylon Locking Nuts
- 9~36VDC Input
• Genuine Gore® Waterproof Membrane with Mechanical Seal
- Over / Under and Reverse Polarity Protectiton
- Protected Against Electromagnetic (EMC) and Radio Frequency Interference (RFI)
- 50,000 Hours or 5 Years of Continuous Use
- Operating Temp: -40°F ~ +145°F
- MIL810-STDG Vibration Compliant
- ROHS Compliant
- Printed Logo - No Exposed Aluminum
|
|
This Part has options, please click the button below to order.
513-X2 + Option(s) X2-Series LED Black Housing 12" Light Bar! The Best Light Bar for Center Console Boats! Isolated Dissimilar Metals. Amazing Beam Pattern with Minimum Reflection on Bow. Pressed Fit Assembly = Less Fasteners. Extended Power Wire for Easy Installation.
FEATURES
- Optimal Beam Pattern to Reduce Bow Reflection
- Integrated Temperature Control System (TCS)
- Combination Beam Pattern
- 10,080-42,000 Lumens
- 24-100 X 5W OSRAM CSHP LEDS
- 4.3A-21.5A @ 12V DC / 2.2A-10.75A @ 24V DC
- 9~32V DC Input
- IP67 Rated
- High Lux - High Output
- 120W-300W MAX (@ 32V)
- Durable Scratch Resistant High Impact Polycarbonate Lens
- 9FT Power Wire
- 6000K (Cool White)
- New Design to Improve Aerodynamics (Noise Reducers are Not Required)
- Chrome Coated Stainless Hardware to Eliminate Dissimilar Metal
- Max Distance 3,973FT
- Blacked Out Design
- Extruded 6063 Aluminum Body
- 50,000 Hours or 5 Years of Continuous Use
- Over / Under and Reverse Polarity Protection
- VHF and AIS Safe
- Protected Against Electromagnetic (EMC) & Radio Frequency Interference (RFI)
- Operating Temp: -40°F- +145°F
- MIL810-STD 8.6G Vibration Compliant
INCLUDES
- (2) Chrome Coated Mounting Brackets
- Chrome Coated Stainless Steel Hardware
- Copper Tinned Marine Grade Extended Power Wire - 9ft
|
|