Serial 0B721206 Thru 0D805068 - Bravo Drives

Drive Shaft Retaining Tool 91-805381

Use to hold bearings and drive shaft in Bravo Three drive units, Serial Number 0L999999 and below, while checking backlash.

Drive Shaft Retaining Tool 91-863738

Use to hold the bearings and the lower drive shaft while checking backlash on the Bravo Three drive units.

Driven Gear Clamping Tool 91-865115

Prevents driven gear movement when measuring the gear lash of the driveshaft housing.

Driver Handle 91-805454

Driver handle for the 91-805470 Front Bearing Guide of the Bravo One, Bravo Three, Bravo 2000 and Blackhawk drive units.

Driver Rod 91-37323

Use with various drivers to install bearings on the Alpha One Gen II, Bravo One and Bravo Two gear cases.

Forward Gear Bearing Cup Puller Shaft 91-31229

5/8 in. x 18 in. (15.875 mm) long threaded rod.

Front Bearing Guide 91-805470

Guides installation of front bearing into Bravo One, Bravo Three and Blackhawk drive units.

Gear Lash Flag 16/19 91-865116

Aids in checking the gear lash for 16/19 tooth gears in the driveshaft housing.

Gear Lash Flag 23/30 91-865082

Aids in checking the gear lash for 23/30 tooth gears in the driveshaft housing

Gear Lash Flag 27/32 91-865080

Aids in checking the gear lash for 27/32 tooth gears in the driveshaft housing.

Gimbal Bearing Installation Collar Number 3 91-30366T1

Use with 91-29310 Plate Puller, 91-37323 Driver Rod and 91-32335T Bearing Head to install the gimbal bearing in Alpha, MC-1 and Bravo drive units.

Supercedes: 91-30366, 91-303661

Guide Insert 91-805473

Use with Vertical Guide Tool and Vertical Shaft Service Tool to set the drive shaft preload on Blackhawk drive unit.

Hex Nut @2 11-24156 (Priced Each. Must sell in quantities of 2)

A 5/8 in. x 18 in. hex nut which aids in the removal and installation of various engine components. May use with Puller Shaft 91-31229; also included in the Bearing Removal and Installation Kit (91-31229A7).

Hinge Pin Tool 91-78310

Removes and installs the hinge pins from all Mercury MerCruiser drive units.

Lube Gun (Priced Each. Must be sold in quantities of 4) 91-37299Q2

Allows easy access to grease fittings.

Supersedes: 91-37299, 91-37299A1

McGard Stern Drive Locks - Mercruiser Alpha, Bravo, OMC Cobra & King Cobra Dual Drives Stern Drive Lock

• Overall Lock Length: .750"
• Thread Size: 7/16" - 20
• Hex Size: 5/8"

Stern Drive Applications: Mercruiser Alpha, Bravo I-III (incl. X & XR), Blackhawk, Vazer, OMC Cobra & King Cobra, Volvo SX, DP-S. Note: Only works on 2003 and earlier models of Bravo III.

Stern drive theft is on the rise, don't take a chance on losing your favorite outdrive or prop, for that matter be safe not sorry. Simply replace one of the stern drive mounting nuts with a McGard lock. Stern drive locks are fully machined from high quality stainless steel and through-hardened. This proven design features a free-spinning collar that turns if attacked by gripping tools without loosening the lock. Give yourself the best protection available against stern drive theft. Ask for McGard Marine Locks by name.

McGard Prop Locks - Mercruiser Alpha, Bravo, TRS Prop Lock

• Overall Lock Length: 1.025"
• Thread Size: 3/4" - 16
• Hex Size: 1 - 1/16"
• Set of 1 Lock, 1 Key, 1 Washer and 1 Cap

Stern Drive Applications: MerCruiser Alpha I, Bravo I (incl. X & XR), Vazer
OMC Cobra and King Cobra
Outboard Motor Applications: Mercury/Mariner 70 hp & larger (ex. 225hp 4 stroke before 2005)
Mercury Bigfoot 40 hp, 50 hp, 60 hp (4 stroke)
Optimax 75 hp & larger, Verado 135 hp & larger
Johnson/Evinrude 150 hp & larger (2 stroke)

Propeller theft is on the rise, don't take a chance on losing your favorite outdrive or prop, for that matter be safe not sorry. Protect yourself against expensive propeller theft with a McGard propeller lock, featuring the same patented design as our stern drive and outboard motor locks. A free-spinning collar will turn if attacked by gripping tools without loosening the lock. Constructed of naval brass and hardened stainless steel, once installed our propeller lock offers maximum security for 24 hour protection.

Mercruiser Installer Tool 91-840385

Used On: Bravo One, Bravo Three, Bravo Two, Bravo X One, Bravo X Three, Bravo X Two, Bravo XR One, Bravo XR Sportmaster, Bravo XR Three, Bravo XZ One, Hi-Performance Transom, Intergrated Transom

Oil Seal Driver 91-55916

Installs the oil seals in the TR, Bravo One and Bravo Two drive unit bearing carriers.

Pinion Gear Shimming Tool 91-865114T

Measures the pinion (drive) gear depth of the driveshaft housing

Supercedes: 91-865114