Heavy Duty Marine Grade Hose - Rigging Hose

• Replaces Mercury OEM #32-842756005
• Made in the USA
• SOLD PER FOOT
• Available in Black only.

This Replacement Hose for Mercury #32-842756005 HOSE fits the following models:

• Mercury Outboard 200HP 200HP 1B912786 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Pro XS 1B752547 THRU 2B535608 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 0T997974 THRU 1E000796 BOTTOM COWL
• Mercury Outboard 300HP 300HP DFI XS 1E052058 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI 1B504989 THRU 1B912785 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Pro XS 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI 1B504989 THRU 2B535086 BOTTOM COWL
• Mercury Outboard 300HP 300HP DFI XS 1E001867 THRU 1E052057 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Sport XS 1E002584 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP Pro XS 1B912786 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP 1B528615 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI 1B912786 THRU 2B535571 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI 1B528615 THRU 2B535086 BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI Pro XS 1B504989 THRU 1B912785 BOTTOM COWL
• Mercury Outboard 250HP 250HP 1E003046 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP Pro XS 1B912786 THRU 2B535571 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI XS 1E002584 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Sport XS 1E051824 THRU 1E052994 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E002342 THRU 1E051113 BOTTOM COWL
• Mercury Outboard 175HP 175HP DSI 1E052967 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Sport XS 1E000797 THRU 1E002583 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Pro XS 1B752547 THRU 2B535608 BOTTOM COWL
• Mercury Outboard 250HP 250HP Pro XS 1B752547 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E053158 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Sport XS 1E002342 THRU 1E051823 BOTTOM COWL
• Mercury Outboard 225HP 225HP Pro XS 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E000797 THRU 1E002341 BOTTOM COWL

New Pro-Flex Marine rigging hose is the most desirable in the industry. The combination of copolymer materials and two-part helically wound construction makes this rigging hose superior to others in the market. The new PRO-FLEX has all the characteristics riggers are looking for plus ultraviolet protection, smooth inner bore, crush resistance, flexibility, durability, light weight, and interlocking design.

SPECIAL FEATURES

• Two part helically wound 
• Doublewall smooth inner bore
• Special Proprietary UV protection 
• Smoothbore and crush resistant
• Flexibility and durability 
• Light-weight and interlocking design
• Produced from a proprietary polyolefin copolymer formulation using the highest quality material
• State-of-the-art automation blending process that ensures product consistency 
• Weight / ft 0.40lbs 
• Centerline bend Radius 4.5" with our 2" rigging hose 
• Made in the USA
• SOLD PER FOOT

****NOTE**** Our hose is performance based, doublewall rigging hose and is manufactured to exacting tolerance and size as the OEM like Mercury Racing, SEVEN Marine, Yamaha etc...

New Pro-Flex Marine rigging hose is the most desirable in the industry. The combination of copolymer materials and two-part helically wound construction makes this rigging hose superior to others in the market. The new PRO-FLEX has all the characteristics riggers are looking for plus ultraviolet protection, smooth inner bore, crush resistance, flexibility, durability, light weight, and interlocking design.

SPECIAL FEATURES

• Two part helically wound 
• UV protection 
• Smoothbore and crush resistant
• Flexibility and durability 
• Light-weight and interlocking design
• Produced from a proprietary polyolefin copolymer formulation using the highest quality material
• State-of-the-art automation blending process that ensures product consistency 
• Weight / ft 0.40lbs 
• Centerline bend Radius 4.5" with our 2" rigging hose 
• Made in the USA
• SOLD PER FOOT
• Currently only black, gray and white colors available. Check back soon for other colors.

****NOTE**** Our hose is performance based, doublewall rigging hose and is manufactured to exacting tolerance and size as the OEM like Mercury Racing,SEVEN Marine, etc...

****CAUTION***** Single wall and Import Hose and uses different thread pitch example: TH Marine.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits Large 2.5" ID / 3" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector and 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.