Exhaust Tips - Angle Cut Tips

• 4" Diameter.
• Constructed of High Quality 316L Stainless Steel.
• 316L Stainless Steel is specially formulated for harsh marine environments with much superior corrosion resistance over standard 304 stainless steel. 
• Tip includes internal flap.
• Sold Each.
• 45 Degree Angle Cut.
• Use Silicone to seal to Transom.
• Length Overall: 11-1/2", Flange To Inside End: 5", Flange To Outside End: 6-1/2"

• 4" Diameter.
• Constructed of 316L Stainless Steel.
• Tip includes internal flap.
• Sold Each.
• 45 Degree Angle Cut.
• Use Silicone to seal to Transom.
• Length Overall 17", Flange to Inside End 5", Flange to Outside End 12".

If you are looking for something a little different and need a custom tip, then we have your answer! These popular angled end tips share the same great construction and gleaming finish as our standard tip but are custom made to various length styles and can accommodate reducers and angled flanges. These tips include flaps and will accept our popular slip-in silencers. Sold Each.

NOTICE: TWO OF THE CUSTOM CONFIGURATIONS ON HERE ARE NORMAL PRODUCTION ITEMS AVAILABLE AT LOWER COST AND SHOULD NOT BE ORDERED FROM THIS PAGE:

IF YOU DO NOT SEE THE OPTIONS YOU NEED IN THE DROP DOWN MENUS BELOW CONTACT US AND PROVIDE A SKETCH OF WHAT YOU ARE LOOKING FOR AND WE WILL PROVIDE A QUOTE!

CUSTOM TIPS TAKE 7-10 BUSINESS DAYS TO BUILD AND ARE QUOTE ONLY.

4" Angle Cut Tips
To view and download the PDF Tip Drawing CLICK HERE

4" Diameter Polished 304 Stainless steel tip measure 10 1/2" long with 5 1/2" external, and 5" internal. NO internal flap. (SOLD IN PAIRS)

Mufflers can be used with this tip. P/N 02-6472

4" Angle Cut Tips with Internal Flaps
To view and download the PDF Tip Drawing CLICK HERE

4" diameter Polished 304 Stainless steel tip measure 10 1/2" long with 5 1/2" external, and 5" internal. WITH internal flap installed. (SOLD IN PAIRS)

Mufflers can be used with this tip. P/N 02-6472

4" Extra Long Angle Cut Tips
To view and download the PDF Tip Drawing CLICK HERE

4" Diameter Polished 304 Stainless steel tip measure 15 1/2" long with 10 1/2" external, and 5" internal. NO internal flap. (SOLD IN PAIRS)

Mufflers can be used with this tip. P/N 02-6479 or P/N 02-6472

4" Extra Long Angle Cut Tips with Internal Flaps
To view and download the PDF Tip Drawing CLICK HERE

4" diameter Polished 304 Stainless steel tip measure 15 1/2" long with 10 1/2" external, and 5" internal. With internal flap installed. (SOLD IN PAIRS)

Mufflers can be used with this tip. P/N 02-6479 or P/N 02-6472

• 3" Diameter.
• Diameter of the mounting flange is 4 3/4"
• Constructed of 316L Stainless Steel.
• Tip includes internal flap.
• Sold Each.
• 45 Degree Angle Cut.
• Use Silicone to seal to Transom.
• Length 12-1/2", Flange to Inside End 5", Flange to Outside End 7-1/2".

• 3-1/2" Diameter.
• Constructed of 316L Stainless Steel.
• Tip includes internal flap.
• Sold Each.
• 45 Degree Angle Cut.
• Use Silicone to seal to Transom.
• Length 10-1/4", Flange to Inside End 5", Flange to Outside End 5-1/4".
• The tips flange has an O.D 5-1/2".

3 1/2" Angle Cut Tips
To view and download the PDF Tip Drawing CLICK HERE

3 1/2" Diameter Polished 304 Stainless steel tip measure 10 1/2" long with 5 1/2" external, and 5" internal. NO internal flap. (SOLD IN PAIRS)

Mufflers can be used with this tip. P/N 02-6471

Gil Custom Composite - Angle Cut Exhaust Tip

Gil custom exhaust tips provide GIl quality at an extremely affordable price. Their body is made of 100% composite material that's impervious to corrosion. Polished stainless Angle Cut extension.

• All Composite Body Construction
• Built-in flapper
• Fit all 4" exhaust pipes
• Angle Cut SS Sleeve
• SS Sleeve Tip part extends 5.5"
• Some assembly required.
• SS part and composite base need to bonded with high temp adhesive (included).

Note: sold each.

• Kit for 4" Exhaust Tip.
• Easy Installation.
• Includes: (3) Stainless Steel mounting screws and (1) Gasket.
• Fits all Hardin Marine 4" exhaust tips.