Deck & Dash Hardware - Swim Steps & Ladders

This is a machined billet aluminum swim step. Available in Powdercoated colors or Raw finish to fit 12 and 16 degree transoms (12 Degree uses included adjustment wedges on the brackets). All powdercoated steps are powdercoated at time of order and take 10-14 business days to ship. Kit includes backing plates, step, brackets and bolts. Note: As transom styles and thicknesses vary, kit does not include bolts to mount to transom. Brackets are 18" on center spacing. Steps are SOLD EACH. FITS LADDERS: 405-1008, 405-1017, 405-1011 AND 405-1020

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

Self-Retracting Transom Ladder - Polished

Designed for easy installation on any transom. Adjustable swivel mounting brackets enables ladder to fit most angled or curved transoms. Ladder has a 23" drop. It is constructed of 304 stainless material with 1" diameter tubing. Ladder features a non-slip, all black rubber sleeve providing non-slip grip and protection. Comes completely assembled, ready for installation.

Dimensions: 12" Width x 14-1/2" Depth x 23" Drop

Maintenance: To ensure the best operation of your aqua step, Aqua Performance recommends that you hose off your step after every use, as you would the rest of your watercraft. To remove sand build up: You will need to remove the side caps and use a hose to spray water inside the spring mechanism while moving the step up and down. When finished rinsing, we recommend and use Prolong Oil as a lubricant onto the spring. Replace caps and bolts to ensure a proper fit.

• Aluminum Billets: 1" Counter Sunk Allen Screws, washers & nylon insert lock nuts.
• Solid Anodized Billet: 1" Button Head Screws with washers & nylon insert lock nuts for drill & tapping, must use lock tight.
• Fiberglass or Teak Platforms; Solid or Open Slot: 2" Carriage Bolts with washers and nylon insert lock nuts. Cut to desired length.
• All Integrated Platforms: Backing Plates with 2" Machine Screws, washers, nylon insert lock nuts.

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.

Self-Retracting Double Step Boarding Ladder, Polished

This ladder features a double step folding down 34" into the water. The ladder comes with a non-slip, all black rubber sleeve providing grip and protection. It is constructed of 304 stainless steel material with 1" diameter tubing. Comes completely assembled. Mounting hardware and easy step by step instructions are included.

Dimensions: 11" x 34", Width 11-1/2", Depth 22", Drop 34"

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.

Self-Retracting One-Step Ladder

This ladder is designed to mount under any swim platform or can be mounted flat/vertically on any transom with no or with minimal platform. The ladder can be made any size to fit boats with a limited mounting area. Ladder is constructed of 304 stainless steel material with 1" diameter tubing. It features a non-slip, all black rubber sleeve providing grip and protection. Comes completely assembled, ready for installation.

Maintenance: To ensure the best operation of your aqua step, Aqua Performance recommends that you hose off your step after every use, as you would the rest of your watercraft. To remove sand build up: You will need to remove the side caps and use a hose to spray water inside the spring mechanism while moving the step up and down. When finished rinsing, we recommend and use Prolong Oil as a lubricant onto the spring. Replace caps and bolts to ensure a proper fit.

Dimensions:12-1/2" Width x 12" Drop

• Aluminum Billets: 1" Counter Sunk Allen Screws, washers & nylon insert lock nuts.
• Solid Anodized Billet: 1" Button Head Screws with washers & nylon insert lock nuts for drill & tapping, must use lock tight.
• Fiberglass or Teak Platforms; Solid or Open Slot: 2" Carriage Bolts with washers and nylon insert lock nuts. Cut to desired length.
• All Integrated Platforms: Backing Plates with 2" Machine Screws, washers, nylon insert lock nuts.

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.

Self-Retracting Under-Mount Accordion Step Ladder

This ladder self retracts and tucks under any integrated or add on platform, enabling unobstructed use of valuable topside areas. Ladder is constructed of 304 stainless steel material with 1" diameter tubing. It features a non-slip, all black rubber sleeve providing grip and protection. Comes completely assembled, ready for installation. Available in polished only. (Mounting hardware included).  Currently ONLY the 14-1/2" wide models have a bent step as shown. The 10-1/2" and 11-1/2" models have a straight step.

Dimensions (overall):
• 10.5 X 18: 10-1/2"width x 12-1/2" depth x 18" drop - straight step
• 10.5 X 21: 10-1/2"width x 14-1/2" depth x 21" drop - straight step
• 11.5 X 18: 11-1/2"width x 12-1/2" depth x 18" drop - straight step
• 11.5 X 21: 11-1/2"width x 14-1/2" depth x 21" drop - straight step
• 14.5 X 18: 14-1/2"width x 12-1/2" depth x 18" drop - bent step (as shown)
• 14.5 X 21: 14-1/2"width x 14-1/2" depth x 21" drop - bent step (as Shown)

(Note: Dimensions are overall size. Actual step width is about 2" smaller than overall width. For replacement measure full width of mounting brackets.)

• Aluminum Billets: 1" Counter Sunk Allen Screws, washers & nylon insert lock nuts.
• Solid Anodized Billet: 1" Button Head Screws with washers & nylon insert lock nuts for drill & tapping, must use lock tight.
• Fiberglass or Teak Platforms; Solid or Open Slot: 2" Carriage Bolts with washers and nylon insert lock nuts. Cut to desired length.
• All Integrated Platforms: Backing Plates with 2" Machine Screws, washers, nylon insert lock nuts.

Please double check measurements before placing order, all ladders subject to 15% restocking fee for exchanges and returns.