620-29139 1/16" x 3/4" Cotter Pin - Stainless
Bend prongs outward to secure. Also known as split pins, they have one prong slightly longer than the other so they’re easy to open.
Type 316 and 18-8 stainless steel may be mildly magnetic. Type 316 pins are more corrosion resistant than 18-8 stainless steel pins.
|
|
620-332010 3300 Cable Clamp Only
For use with 33C Series Cable, which are typically used for throttles, shifters and indicators. Mounting holes are 1" on center.
|
|
475-31799 Zinc Coated Steel 33C Cable Ball Joint
- Cable end ball joint
- For 33c type cables
- 10/32 threads
- Zinc coated steel
- Comes with lock nut
|
|
620-370618
Swivel Connection Kit, Billet Aluminum
Used with the steering cable on a jet boat to connect to the steering arm.
|
|
620-331532 4300 Cable Clamp Stainless Steel
For use 43c or 43bc cables, which are typically used for forward/reverse and trimmable nozzles on jet boats. Mounting holes are 1" on center.
|
|
620-331538 Cable Clamp Shim Only
To be used in conjunction with 33 and 43 series cable clamps. Mounting holes are 1" on center.
|
|
620-336174 Quick Release 33C Stainless Steel Cable Clamp Bracket
This is the most popular method of attaching a standard 33C throttle cable to
a throttle bracket. This clamp features a quick release lever allowing you
to detach the throttle assembly when performing tuning or maintenance. Replaces Dometic / SeaStar # 031419.
|
|
620-31799 33C Quick Release Ball Joint Assembly 10-32 Threads
This is a quick release style ball joint assembly This unit threads onto a 33C style cable while the threaded male stud is fastened to the carburetor by using a sure lock threaded sleeve for quick detachment.
1-1/16"Width x 1-1/16" Length
1/2" Thread Length
|
|
620-31800 Stainless Steel 10-32 (33c) Cable End Quick Release Ball Joint, 1/4-28 Stud Accepts 33C Cable
|
|
620-3300 Brass 33C Cable Attaching Pivot, 1/4" Shaft, 10-32 Thread
This brass pivot is designed to thread onto your 33C throttle cable and provides a secure attachment point to your carburetor. Uses a 3/32 cotter pin (Not Included see related parts) to hold in place.
|
|
620-29140 Brass 43C Cable Attaching Pivot, 1/4" Shaft, 3/8" Shaft Length, 1/4-28 thread
This brass pivot is designed to thread onto your 43C jet boat shift control. Uses a 1/16" cotter pin. (Not Included)
|
|
620-30190 Mercury Outboard Adapter
Mercury Outboard Kit (1965-date), Mercury Stern Drive Kit (all) Use with two 3300 cables. Allows quick installation and maximum adjustment at engine. Package includes throttle and shift adapters for one engine. Individually packaged. Adapts universal 3300/33C style 10-32 thread cables for use with Mercruiser I/O engines and Mercury outboards. Each kit connects 2 cables (shift and throttle) to 1 engine.
|
|
620-30212 Mercury Sterndrive Cable Adapter
Adapts 33C / 3300 style cables for use with Mercury Engines.
|
|
620-30055 OMC Sterndrive Cable Adapter
|
|
620-30107 Mercury Control 33C Adapter
This adapter kit connects 3300/33C style throttle & shift cables to OEM Mercury controls. Will not work with Mercury Gen II controls.
|
|
|
|
|
