Orca Marine Cooling Systems

Stock Vertical Expansion Tank size:5 x 12, 4 qts

Expansion Tank; size:5 x 12; 4 qts

Stock Vertical Expansion Tank size:5 x 14, 4.8 qts

Expansion Tank; size:5 x 14; 4.8 qts

Stock Vertical Expansion Tank size:5 x 8, 2.8 qts

Expansion Tank; size:5 x 8; 2.8 qts

TE 20696 After cooler Element, Engine Manufacturer Perkins Manufacturer Part No. 24865186, After cooler Element

TE 20696 After cooler Element

Engine Manufacturer Perkins Manufacturer Part No. 24865186, After cooler Element

Thermostat 160 DEGREE

Thermostat, 160 DEGREE

Description 160 degree thermostat Type Thermostat Size 160 degree

Transmission oil Skin Cooler, Engine Manufacturer Volvo Manufacturer Part No. 858541, Transmission oil Skin Cooler

Transmission oil Skin Cooler

Engine Manufacturer Volvo Manufacturer Part No. 858541, Transmission oil Skin Cooler

Thermostat Housing Aluminum

Thermostat Housing, Aluminum

Description Thermostat Housing Type Thermostat Housing

Volvo Upper bracket for 400302 cooling system

Volvo Upper bracket for 400302 cooling system

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:4 x 16, 1348 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:4 x 16; 1348 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:4 x 20, 1763 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:4 x 20; 1763 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:4 x 24, 2178 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:4 x 24; 2178 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:5 x 20, 2605 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:5 x 20; 2605 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:5 x 24, 3237 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:5 x 24; 3237 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material

Vertical, size:5 x 28, 3869 sq in, copper-nickel tubes

Vertical exchangers are single pass on the shell side, 3 pass on the tube (raw water) side. These exchangers have no expansion tank integrated into their design, and rely instead on an external overflow reservoir to capture coolant volumes which exceed system capacity when hot, and return them to the cooling system when it cools down. The shell is completely packed with tubing, providing the maximum heat transfer surface possible for each set of external dimensions. This exchanger is illustrated without a mounting bracket. We have mounting brackets for virtually any mounting configuration. The exchanger is mounted on the bracket with cushioning material, and held in position with stainless steel clamps (sold separately). Support is provided under the bottom end cap. All exchangers are supplied with a zinc anode. All Raw Water and Coolant connections are beaded hose connections. Other styles and dimensions are available on request. Connection configurations may also be specified to meet your individual system requirements. Vertical; size:5 x 28; 3869 sq in, copper-nickel tubes