865-2278 1/8" NPT Female to 12mm x 1.75 Male
- For Adapting Oil Pressure/Temperature Gauges
- Works On Many Foreign/Domestic Engines
|
|
865-2268 1/8" NPT Female to 16mm x 1.5 Male
- For Adapting Oil Pressure/Temperature Gauges
- Works On Many Foreign/Domestic Engines
|
|
865-2260 1/8" NPT Weld-In Temperature Bung Adapter
|
|
865-5284 AutoMeter's GM LS engine gauge installation kits feature specialized components to ease the installation of an LS engine into your boat. Includes a full color installation guide that not only details the use of the included metric adapter fittings, short depth temperature sensor, and tachometer resistor, but also covers installation procedures for other commonly monitored parameters.
Each kit includes:
- 12mm x 1.5 to 1/8 in. NPT adapter
- 16mm x 1.5 to 1/8 in. NPT adapter
- Low profile electric temperature sender
- 10K 1/2 watt resistor (tach function)
|
|
865-3223 1/8'' Diameter Nylon Tubing, 10-Feet Long
Only for mechanical pressure gauges.
|
|
865-3226 1/8'' Diameter Nylon Tubing, 12-Feet Long
- For Mechanical Pressure Gauges
- Not For Fuel Or Brake Pressure Gauges
|
|
865-3222 1/8" Diameter Nylon Tubing, 10-Feet Long with Ferrules
Only for mechanical pressure gauges up to 200 psi (Except fuel pressure gauges).
|
|
865-3227 #4 Braided Stainless Steel Hose, 3-Feet Long, 3/16'' ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
865-3229 #4 Braided Stainless Steel Hose, 4-Feet Long, 3/16'' ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
865-3228 #4 Braided Stainless Steel Hose, 6-Feet Long, 3/16'' ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
865-3234 #3 Braided Stainless Steel Hose, 3-Feet Long, 3/16" ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
865-3235 #3 Braided Stainless Steel Hose, 4-Feet Long, 3/16" ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
865-3236 #3 Braided Stainless Steel Hose, 6-Feet Long, 3/16" ID Fittings
- For Mechanical Pressure Gauge
- Braided Stainless Steel Hose
|
|
730-GPSRAQ3VV Recommended for use with Livorsi Vantage View® Speedometers. Standard 1-second 1HZ update with 4 ft harness. Power and ground are pre-terminated and the signal wire is pre-terminated with a butt connector to connect to the NMEA 0183 input on the Master Harness. 2 3/4" L x 2 3/8" W x 7/8" H
|
|
730-GPSRAQ3VV Recommended for use with Livorsi Vantage View® Speedometers. Standard 1-second 1HZ update with 4 ft harness. Power and ground are pre-terminated and the signal wire is pre-terminated with a butt connector to connect to the NMEA 0183 input on the Master Harness. 2 3/4" L x 2 3/8" W x 7/8" H
|
|
