IMCO Marine

Steer Cap Kit Bravo 2 Ear 3.250” Clevis Pin Centers 1.000” Center Hole Black

Steer Cap Kit Bravo 2 Ear 3.250” Clevis Pin Centers Black

Steer Cap Kit Bravo 2 Ear 6.500” Clevis Pin Centers 1.000” Center Hole Black

Steer Cap Kit Bravo 2 Ear LH 1.625” Offset Clevis Pin Black

Steer Cap Kit Bravo 2 Ear RH 1.625” Offset Clevis Pin Black

Steer Cap Kit Bravo 2 Ear RH 3.250” Offset Clevis Pin Black

Steer Cap Kit Bravo 3 Ear LH 1.625” Offset Clevis Pin Black

Steer Cap Kit Bravo 3 Ear RH 1.625” Offset Clevis Pin Black

Steer Cap Step Drill 25/64” x 5/16” x Approx. 7.500” OAL

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Bravo powered recreational performance sport boats capable of speeds in the 60 to 70 mph range and used primarily in moderate water conditions. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For Bravo One Stern Drives

IMCO's new external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout, utilizing a one-inch hydraulic ram rod with a double seal piston, stainless steel clevis end connections and a special cast aluminum drive end cap The system also includes a cast stainless steel mounting bracket, teflon bushings and pins, and one-half inch precision shoulder bolts IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Standard Single Ram Power Steering

The IMCO Standard Single Ram Power Steering System is intended for Evinrude E-Tec 250 HO Motor powered recreational performance sport boats. Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar) 

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives. Includes an extension box kit.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar) 

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar) 

Requires Installation Kit:

421-HK-11, Brazilian manifold style, 1994 and later.
421-HK-9, Saginaw fitting style, 1994 and earlier.

For parts list, and to buy replacement parts click here

Dual External Hydraulic Steering For 2 Bravo One Stern Drives

IMCO's external hydraulic steering for the MerCruiser Bravo One has been designed, engineered and tested to eliminate side-to-side drive unit "play", a major contributor to high speed chine walking IMCO's power steering system is ultra heavy-duty throughout. The  IMCO steering systems are easily installed and priced more affordably than other less efficient alternatives. Includes an extension box kit.

Note: These kits contain non-assembled rubber hoses and brass fittings See steering component section for stainless steel braided line options.

Kit includes Tie bar up to 18" at no extra cost. Tie Bars longer than 18" will have additional price per inch. Please type the exact length of the tie bar you need (example: 34.5") and then select the price option from the drop drown (from previous example, choose 35" for a 34.5" tie bar) 

For parts list, and to buy replacement parts click here