462-6-351150020 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, sub part K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flange mount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation.
Hose: 3", CFM: 105, Volts: 12, Amps: 4.3, Size: 6 3/4" L x 4 3/4" W x 5 1/2" H
|
|
462-354-230212
- Formed 304 stainless steel w/plastic center cap.
- Steering wheels fit standard 3/4'' tapered shaft.
- Spokes: 5
|
|
462-354-2541121 Formed 304 stainless steel. 2" Rail height. Size: 12", Tube: 3/4" OD
|
|
462-622-15116101 "Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11".
Kit Includes:
- 12-volt actuators (2) with 6' leads and Deutsch connectors
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless steel trim tab blades, 12 gauge (2)
- Stainless steel mounting hardware
Switch kit sold separately
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Electro-Polished, Volts: 12
|
|
462-622-15102104 Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11"
Kit Includes:
- 12-volt actuators (2) with 6' leads and Deutsch connectors
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless Steel trim tab blades, 12 gauge (2)
- Stainless Steel mounting hardware
- Switch Kit
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Standard, Volts: 12
|
|
462-622-15106102 Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11".
Kit Includes:
- 12-volt actuators (2) with 6' leads and Deutsch connectors
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless Steel trim tab blades, 12 gauge (2)
- Stainless Steel mounting hardware
- Switch Kit
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Standard, Volts: 12
|
|
462-622-15110103 Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11".
Kit Includes:
- 12-volt actuators (2) with 6' leads and Deutsch connectors
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless Steel trim tab blades, 12 gauge (2)
- Stainless Steel mounting hardware
- Switch Kit
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Standard, Volts: 12
|
|
462-622-20160001 Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11".Kit Includes:12-volt actuators (2) with 6' leads and Deutsch connectors20' actuator extension harnesses (2) with Deutsch connectorsStainless Steel trim tab blades, 12 gauge (2)Stainless Steel mounting hardware Description: Edge Mt. Blade Only, Size: 12"L x 12"W, Finish: Standard
|
|
462-622-15105102 Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ball screw design is reliable, powerful, and features an instant response which makes it very user friendly.
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 gauge, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".
Kit Includes:
- Waterproof plug and play Deutsch connectors
- 12 -volt actuators (2) with 6 foot leads
- 2 stainless steel trim tab planes-12 gauge
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless steel mounting hardware
- Switch Kit
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Standard
|
|
462-622-15109103 Lenco trim tabs makes your boat ride smoother, drier, faster and with increased safety. Lenco's ballscrew design is reliable, powerful, and features an instant response which makes it very user friendly.
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are constructed of 12 guage, 304 stainless steel with a 5/8" flared trailing edge. Minimum transom height: 14".
Kit Includes:
- Waterproof plug and play Deutsch connectors
- 12 -volt actuators (2) with 6 foot leads
- 2 stainless steel trim tab planes-12 gauge
- 20' actuator extension harnesses (2) with Deutsch connectors
- All stainless steel mounting hardware
- Switch Kit
Size: 12"L x 12"W", Boat Size: 17'-30', Finish: Standard
|
|
462-218-F5W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 11" x 30" , Case: 5 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-218-F6W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 11" x 42" , Case: 5 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-622-15015101 "Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Blades are 304 stainless steel with 1" turned up edges and an 85° inside taper. Edge mount tabs are space savers. The actuators mount at the trailing edge of the blades, requiring less transom height than the standard mount tabs. Min transom height: 9" long models - 13.5", 12" long models 11".
Kit Includes:
- 12-volt actuators (2) with 6' leads and Deutsch connectors
- 20' actuator extension harnesses (2) with Deutsch connectors
- Stainless steel trim tab blades, 12 gauge (2)
- Stainless steel mounting hardware
Switch kit sold separately
Size: 12"L x 9"W", Boat Size: 14'-18', Finish: Standard, Volts: 12
|
|
350-5313 12° Spacer Wedge Plate (Aluminum)
These carburetor spacer wedges are designed to compensate for extreme engine
angles on many boats that inhibit performance. Fits square bore carburetor bolt pattern.
|
|
462-62-120RMAM30 The 120RMAM fuel filter/water separator features a unitized mounting bracket for mounting versatility and 2 inlet/outlet ports. It also features an Aquabloc® II replacement element that repels water and removes solid contamination. GPH: 15, Micron: 30, Ports: 1/4"-18 NPTF", Bowl: Metal, Size: 3.2"D x 3.2"W x 5.7"H" Sold: Each
|
|
462-189-33103 Low profile pump design for ease of mounting and removal in tight bilge areas, especially suited for vessels with inboard or I/O engines.
Shaft seal: lip seal
Removable cartridge style, easy to clean
Water cooled motor
Complies to ABYC, NMMA and ISO8849 marine specifications
Made in U.S.A. 3 year warranty - Shaft seal: lip seal
- Removable cartridge style, easy to clean
- Water cooled motor
- Complies to ABYC, NMMA and ISO8849 marine specifications
- 3 year warranty
GPH: 1250, Hose: 1-1/8", Volts: 12, Amps: 3
|
|
462-189-3247261002 Sleek, reliable and compact unit with integrated Ultima switch ready to install and run for years of service.
Patented Mirus field detector cells
No exposed sensors, eliminates corrosion possibilities
Not affected by oil or foreign debris
Includes both a straight and 90° smooth elbow Dura-Port and a removable check valve
Made in USA. - Sleek and compact unit with integrated Ultima switch ready to install and run for years of service
- No exposed sensors, eliminates corrosion possibilities.
- Includes 2 externally threaded duraports, straight and 90° which virtually eliminate port failure
- Includes removable check valve
- Replaceable and upgradable motor cartridges
- 3 year warranty
GPH: 1250, Hose: 1-1/8 & 1-1/4", Volts: 12, Amps: 3
|
|
462-639-529355 Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact.
Fig.: 25, Type: Mini Halogen, Volts: 12, Watts: 5, Amps: 0.42
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact. Sold 2/pk, except where noted. Trade #: 906, Type: Wedge Base, Volts: 12, Watts: 9, Amps: 0.69 Sold: Pack
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Heavy-duty glass envelope for break resistance. Nickel-plated brass prevents corrosion while insuring a positive point of contact. Sold 2/pk, except where noted. Trade #: 53, Type: Mini Bayonet, Volts: 12, Watts: 1.7, Amps: 0.12 Sold: Pack
|
|
