Generic

For the out of production Gusher Galley Pump Mk II. Comes complete with set of washers.

:

Sold: Bag

Spares Kit for Gusher Galley MK3 Pump

Model: Gusher Galley Mk3, Description: Spares Kit

Sold: Bag

Titan Spares Kit

Description: Complete set of serviceable parts (neoprene), Fits: Titan

Sold: Each

Spares Kit for MK5 Pump

Description: Service Kit, Fits: MK5 & Sanitation Pumps

Sold: Each

For holding tanks and vacuum systems. Virtually unblockable and self priming up to 9.8 ft. Can be mounted in most convenient part of boat. Easy to maintain and can run dry without damage. Pumps inmacerated waste. Fuse size 15 amp automotive Output(open flow) 4-3/4 gallons per minute. Wire size of 16 AWG. Max head and lift is 9.8 ft. Hose connections are 1-1/2".
Volts: 12, Ports: 1-1/2"

Spares Kit for Gusher 10 Pump, Neoprene

Description: Complete set of serviceable parts (neoprene), Fits: G10, MK2, MK3

Sold: Each

Spares Kit for Gusher 10 Pump, Nitrile

Description: Complete set of serviceable parts (nitrile), Fits: G10, MK2, MK3

Sold: Each

"Low profile design for narrow bilges which can be installed with horizontal or vertical outlet position. Flow rate of 500 US gals per hour and very low power consumption. Easy to clean with "twist lock" assembly/disassembly. Removable strainer is designed to leave a minimum water level 3/8" in bilge. Recommended optional extra - Fit a Non return valve fitted in line stops water flowing back into bilge (LV1219 3/4" Non return valve). Can be used with Whale's BE9002 float switch or BE9003 Electric Filed Sensor Switch."

GPH: 500, Hose: 3/4", Volts: 12, Amps: 2.6

Sold: Each

"The narrow design is ideal for tight spaces and the multi-position pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solid-state, mercury free design that is unaffected by wave action. 3" max. overall height, 2-1/8" max. overall width."

GPH: 650 w/o Non-return valve, barbed connection , Hose: 3/4", Volts: 12, Amps: 3.4

Sold: Each

"The narrow design is ideal for tight spaces and the multi-position pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solid-state, mercury free design that is unaffected by wave action. 3" max. overall height, 2-1/8" max. overall width."

GPH: 1100 w/Non-return valve, Hose: 1" - 1-1/8", Volts: 12, Amps: 4.6

Sold: Each

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Whalex Tube, 15mm x 10mm, Blue 164'

Sold: Each

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Whalex Tube, 15mm x 10mm, Red 164'

Sold: Each

High speed tapered roller bearing kits. Includes 2 cups, 2 cones, grease seal and cotter pin.

Hub: 1.980", Spindle: 1-1/16" OD"

Sold: Each

Size: 3 oz., Pack: 2, Case: 6

"Hand-cast from elastomer unmatched in ability to resist wear and distortion at high loads. Will not wear out line or chain. Self-lubricating bushings. Low friction. 1/2" Hole."

Size: 2-7/8" W x 4-1/4" H"

"Hand-cast from elastomer unmatched in ability to resist wear and distortion at high loads. Will not wear out line or chain. Self-lubricating bushings. Low friction. 1/2" Hole."

Size: 3-3/8" W x 3-1/2" H "

Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.

Length: 14', Boat Size: 23', Box: 1 pr

Sold: Kit

Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.

Length: 16', Boat Size: 30', Box: 1 pr

Sold: Kit

Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.

Length: 12', Boat Size: 20' (center cleat), Box: 1 pr

Sold: Kit

Prevent boat and dock clashes. Constructed of solid fiberglass and equipped with the unique, patented mooring base that provides more versatility in mounting whips in any type of docking facility. Can be mounted vertically, horizontally, in back of, underneath or on the side corner of the dock. All are heavy duty with adjustable base. Mini moorwhips are standard duty. Set includes 2 poles and 2 bases.

Length: 8', Boat Size: 16', Box: 1 pr

Sold: Box