462-622-70568001 Autoglide Control Box Mountng Bracket. See Lenco's AutoGlide website for application information. Description: Mounting Bracket for Control Box Sold: Each
|
|
462-622-30255001 Boat must be equipped with Lenco Electric Trim Tabs
All plug & play connections, All waterproof, solid state components
Reads SmartCraft, NMEA 2000 & J1939 data - Boat must be equipped with Lenco Electric Trim Tabs
- All plug & play connections, All waterproof, solid state components
- Reads SmartCraft, NMEA 2000 & J1939 data
Description: "Control Box, 6" x 6", Fits: Single actuator tabs
|
|
462-622-30260004 Autoglide Extension Cable, 30' - Boat must be equipped with Lenco Electric Trim Tabs
- All plug & play connections, All waterproof, solid state components
- Reads SmartCraft, NMEA 2000 & J1939 data
Description: 30' Extension Cable
|
|
462-622-15064001 Electric RetroFit Kit for Bennett Trim Tabs. Will retrofit any boat equipped with standard length Bennett 4-ring version hydraulic cylinders. Kit includes everything necessary to eliminate the hydraulic pump and and upgrade your boat to Lenco's electric system. Includes jumper wires to connect to current Bennett rocker switch. Complete installation instructions are included.
Volts: 12
|
|
462-622-15107001 Used on Lenco actuators and extension harnesses.
Comes in a package of 5. Description: Plug and Wedge Set, Pack: 5 Sold: Pack
|
|
462-622-15107002 Used on Lenco actuators and extension harnesses.
Comes in a package of 5. Description: Receptacle and Wedge Set, Pack: 5 Sold: Pack
|
|
462-622-10221211D "Economically priced double rocker switch with Deutsch connections.
36" power pigtail and mounting hardware included.
For 12-volt dual actuator trim tab systems.
Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
12-volt, with 36" power pigtail" " - Economically priced. Double rocker switch with Deutsch connections.
- 36" power pigtail and mounting hardware included.
- For 12-volt single actuator trim tab systems.
- Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
- 12-volt, with 36" power pigtail
" Description: Double Rocker Switch Kit For Dual Actuator Systems
|
|
462-622-10222211D "Economically priced double rocker switch with Deutsch connections.
36" power pigtail and mounting hardware included.
For 12-volt single actuator trim tab systems.
Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
12-volt, with 36" power pigtail" " - Economically priced. Double rocker switch with Deutsch connections.
- 36" power pigtail and mounting hardware included.
- For 12-volt single actuator trim tab systems.
- Hole cut-out 2-1/4", overall size 2-3/4" x 2-3/4"
- 12-volt, with 36" power pigtail
" Description: Double Rocker Switch Kit For Single Actuator Systems
|
|
462-622-15048101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 14"L x 12"W, Boat Size: 16'-32', Actuator: Single, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-622-15049101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 18"L x 12"W, Boat Size: 20'-40', Actuator: Single, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-622-15051101 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5".Kit Includes:7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodesFull transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pinsMechanical strain relief cable sealCustomer supplies mounting hardwareActuator extension harness sold separately in lengths of 7', 14', 20', 26' and 32'Switch Kits sold separately Size: 25"L x 14"W, Boat Size: 28'-46, Actuator: Dual, Volts: 12 Radiused blades give maximum clearance for multiple outboard applications and reduces cavitation to the prop. The stylish design gives maximum performance and is built for extreme duty applications. Extreme duty actuators with 3/8" stainless steel bolts, 6-foot leads and Deutsch connectors. Min. transom height: 10.5". Actuator extension harness sold separately. Kit Includes:- 7-gauge flat-304 electro-polished stainless steel blades with 3-3/4" sacrificial anodes
- Full transom back plate with adjustable C-channel and 3/8" stainless steel bolts and 3/8" stainless steel hinge pins
- Mechanical strain relief cable seal
- Customer supplies mounting hardware
- Switch Kits sold separately
|
|
462-622-15126101 "Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Switch kit sold separately. Minimum transom height - 14.5"." Size: 4" x 12", Finish: Electro-Polished, Volts: 12 Sold: Each
|
|
462-622-15088101 "Great for boats from 14'-25' long with a swim platform and/or ladder. Can be fitted to transoms with limited mounting space. Blades are electro-polished 12 gauge, 304 stainless steel. Fully submersible electric actuators have plug & play Deutsch connectors. Includes: (2) 12V actuators with 6' leads, (2) 20' actuator extension, (2) trim tab blades, stainless steel mounting hardware. Minimum transom height: 13". Switch kit sold separately. Minimum transom height - 13"." Size: 4" x 12", Finish: Electro-Polished, Volts: 12 Sold: Each
|
|
462-622-15052101 "Ideal for boats with a swim platform and/or ladder. They can be fitted to transoms that have a limited mounting area. Blades are 12 gauge, 304 SS with front of blade folded to provide a smooth trailing edge and 1/8" diameter hinge pin. Fast response electric actuators for precise control. All units have Plug and Play connections and are fully submersible.
Kit includes:
- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
" Kit includes:- (2) 12-gauge stainless steel blades w/Electro-Polish finish
- (2) actuators with 6' (1.8 m) lead and Deutsch connectors
- (2) 30133-103 20' actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- Lower mounting brackets
- Stainless steel mounting hardware
Size: 4" x 12", Finish: Standard finish, Volts: 12 Sold: Each
|
|
462-622-20158001 "Replacement Edge Mt. trim tab blade, 9" x 12" " - Single blade only
- Standard finish
- 12 gauge 304 stainless steel
- 1" turned up edges / 85° taper
" Description: Edge Mt. Blade Only, Size: 9" L x 12" W", Finish: Standard Sold: Each
|
|
462-622-15112101 "Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.
Airboat Trim Tab Kits contains:
1) 12-gauge 304 stainless steel trim tab plane
1) #15055-001 actuator with 6' lead & Deutsch plug
1)#30133-002 14' actuator extension wiring harness
1) #15085-001 (116) upper mounting bracket with gland seal
Owner's/installation manual & stainless steel mounting hardware
Switch sold separately (15095001)" "Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry. - Airboat Trim Tab Kits contains:
- 1) 12-gauge 304 stainless steel trim tab plane
- 1) #15055-001 actuator with 6' lead & Deutsch plug
- 1)#30133-002 14' actuator extension wiring harness
- 1) #15085-001 (116) upper mounting bracket with gland seal
- Owner's/installation manual & stainless steel mounting hardware
- Switch sold separately (15095001)
" Size: 9"L x 14"W" Sold: Each
|
|
462-622-30209001D Y-Harness for Dual Station Installations. See Lenco's AutoGlide website for application information. Description: Replacement Y Connector Harness Sold: Each
|
|
