Plumbing - Electric Bilge Pumps

Original replacement strainer base for your Rule bilge pumps.

Fits: Square Rule bilge pumps

Sold: Each

"The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes both straight and 90 degree hose fittings, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty."

GPH: 1500, Hose: 1-1/8", Volts: 12, Amps: 4.8

"The eco-friendly Rule Mate pumps feature a solid state water sensing technology to eliminate a separate float switch. The sensor's unique "field effect" technology is eco-friendly because straight motor oil in the bilge will not turn on the pump. Includes both straight and 90 degree hose fittings, a snap-on strainer for easy cleaning and an anti-fouling impeller. 3-Year limited warranty."

GPH: 2000, Hose: 1-1/8", Volts: 12, Amps: 12

Allows for side mounting to vertical stringer, bulkhead or transom. Use when bottom-strainer mounting is inconvenient or impossible. Simply remove strainer, place in bracket and reassemble. Pump nozzle may point in any of three directions.

Fits: Pumps: 360, 500 & 1100 GPH

Sold: Each

Description: 1-1/8" hose to 3/4" or 5/8" hose (not for use with Rule-Mate pumps)

"Includes a 36" length of 16-gauge tinned, caulked copper wire. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. Mercury-free design. All models are 5-1/2" L (not including hose nipple) 3-1/4" W x 4" H. 3-Year Warranty."

GPH: 500, Hose: 3/4" I.D.", Volts: 12, Amps: 1.2, Pkg.: Clam

"Includes a 36" length of 16-gauge tinned, caulked copper wire. Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal assure powerful, durable performance. Mercury-free design. All models are 5-1/2" L (not including hose nipple) 3-1/4" W x 4" H. 3-Year Warranty."

GPH: 750, Hose: 3/4" I.D.", Volts: 12, Amps: 2.5, Pkg.: Clam

This robust, single diaphragm pump features no filter requirement and a compact design. The pump head and ports rotate for flexible installation. Self-priming to 10' and can run dry. Meets ISO 8846 and USCG regulations for ignition protection.

GPM: 4.2, Ports: 3/4", Volts: 12, Amps: 8

Sold: Each

"This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 6' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and has adequate torque to reverse the pump. Complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter. NOT TO BE USED IN POTABLE WATER SYSTEMS."

GPM: 9, Volts: 24 , Amps: 5

Sold: Each

"This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 4' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. If the water contains a significant amount of oil use oil resistant nitrile impeller #6303-0003. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter. NOT TO BE USED IN POTABLE WATER SYSTEMS."

GPM: 6.3, Volts: 12, Amps: 8

Sold: Each

"Low profile design for narrow bilges which can be installed with horizontal or vertical outlet position. Flow rate of 500 US gals per hour and very low power consumption. Easy to clean with "twist lock" assembly/disassembly. Removable strainer is designed to leave a minimum water level 3/8" in bilge. Recommended optional extra - Fit a Non return valve fitted in line stops water flowing back into bilge (LV1219 3/4" Non return valve). Can be used with Whale's BE9002 float switch or BE9003 Electric Filed Sensor Switch."

GPH: 500, Hose: 3/4", Volts: 12, Amps: 2.6

Sold: Each

"The narrow design is ideal for tight spaces and the multi-position pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solid-state, mercury free design that is unaffected by wave action. 3" max. overall height, 2-1/8" max. overall width."

GPH: 650 w/o Non-return valve, barbed connection , Hose: 3/4", Volts: 12, Amps: 3.4

Sold: Each

"The narrow design is ideal for tight spaces and the multi-position pump head and body makes either a vertical or horizontal installation quick and easy. Pump automatically senses the water level and switches on and off as needed with an environmentally friendly, solid-state, mercury free design that is unaffected by wave action. 3" max. overall height, 2-1/8" max. overall width."

GPH: 1100 w/Non-return valve, Hose: 1" - 1-1/8", Volts: 12, Amps: 4.6

Sold: Each