Water Pump Parts - Volvo

496 Magnum Flame Arrestor with Vent Tube

Both the 8.1 Liter 496 magnum and HP 500 EFI use throttle bodies that are designed to accept clamp-on filters. Although due to size constraints K&N has developed these oval shaped clamp-on flame arrestors to increase the amount of air available for these engines. The shape of this unit allows it to fit under the factory 496 engine cowling.

5-3/4" OD x 1-5/8" Tall Flame Arrestor, Aluminum

This low profile USCG Approved flame arrestor is designed to fit all carburetors with a 5-1/8" air horn or neck. This unit has a 5-3/ 4" outside diameter and is 1-5/8" tall. This unit is constructed of aluminum and is not recommended for saltwater applications. This flame arrestor fits only the Quadrajet and Edelbrock 4bbl. carburetors it does not clear the Holley or Quickfuel J-tubes.

Polished Stainless Steel Flame Arrestor - 5-1/8" Flange
8" OD x 2" Tall (No Vent Tubes)

These flame arrestors feature a stainless mesh style. USCG approved construction. We have units designed to fit standard 5-1/8"(std Holley 4150) carburetor necks. Overall height is 2 3/4".
While outside dimensions range to accommodate many needs larger diameter units flow much more air on performance applications.

**NOTE VENT TUBES SOLD SEPARATELY**

Extreme Custom Billet Flame Arrestor - Single 10" Diameter Holley 4150 or Demon, 3" Tall

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine! For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidly on unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestor is built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available polished only.

If you would like to order Flame Arrestor built to your custom dimensions click here to download the worksheet.

Extreme Custom Billet Flame Arrestor - Dual 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 2" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidly on unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestor is built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

Extreme Custom Billet Flame Arrestor - Dual 4150 / 4500 / Demon Series Oval - Custom Built in 2-3 weeks, NON-RETURNABLE

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine! For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solid unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestor is built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with your logo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions click here.

Oval Billet Flame Arrestor - Dual 4150/4500 3" Tall, 8-3/4" Center - BUILT TO ORDER IN 2-3 WEEKS AND NON RETURNABLE

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with your logo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

Oval Billet Flame Arrestor - Dual 4150/4500, 3" Tall, 8-5/8" Center

At Hardin Marine we recognize that your flame arrestor should not only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance your engine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined it to perfection Each unit is then hand polished by our experienced master craftsmen to a mirror finish The assembly is then mated with a 3" tall, USCG approved, high flow, multi-layered stainless steel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushed as can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppily adjustable mounting bases or elongated holes to contend with, just pure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need a custom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with your logo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

Extreme Custom Billet Flame Arrestor - Single 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

Extreme Custom Billet Flame Arrestor - Single 4150 / 4500 / Demon Series Oval 

At Hardin Marine we recognize that your flame arrestor shouldnot only function perfectly and provide the very most available airflow, but that it should be beautiful to look at and enhance yourengine compartment The flame arrestor is the "Crown" of your engine!For that reason we build the very finest flame arrestors available.

We start with the finest 6061-T6 billet aluminum, CNC machined itto perfection Each unit is then hand polished by ourexperienced master craftsmen to a mirror finish The assembly is then matedwith a 3" tall, USCG approved, high flow, multi-layered stainlesssteel screened element The top and bottom sections rest solidlyon unique standoffs which will not allow the element to be crushedas can happen with common filter elements.

Whether you need standard or a custom dimension, each arrestoris built to exacting specifications. There are no sloppilyadjustable mounting bases or elongated holes to contend with, justpure perfection.

Available for single or dual carburetor applications to fit most popular Barry Grant, Holley and Edelbrock carburetors. Need acustom center dimension....NO PROBLEM.

Available anodized, powder coated, and private labeled with yourlogo and with breather vent tubes.

Length is 21-1/2, and width is 10-1/2

For custom dimensions clickhere.

"SS" Super Sport Series Flame Arrestor For MerCruiser 454/502 Magnum MPI 

Hardin Marine and K&N Engineering have teamed up to bring you an affordable entry level performance filter/flame arrestor kit that bolts directly to your Mercury Magnum series engine throttle body. The expanding shape of this intake assures increased air speed, something that block-like aluminum adapters can't do. Just clamp on the K&N flame arrestor and you're ready to go. Serpentine and V-Belt Engine Compatible.

Note: These clamp-on filter/flame arrestors have limitations to their air flow capability. The filter element can only support enough air flow for approximately 500 horsepower.

Includes the mounting bolts.

Interchanges/Replaces

Mallory

• 9-45705

Volvo Penta

• 875574