Your shopping cart is currently empty.
350 Mag MPI Alpha-Bravo EC - Serial 1A611928 Thru 1A623184 - Intake Manifold and Fuel Rail
Section Drawing: (Hover or click to view larger)
Other Sub-Sections:
- Alternator and Brackets
- AXIUS Steering Components, Hydraulic Pump
- AXIUS Steering Components, Oil Cooler and Bracket, Gen I
- AXIUS Steering, Fluid Filter (High Pressure)
- AXIUS Steering, High Pressure Filter Conversion Kit, Gen I
- AXIUS Steering, Hoses (High Pressure Filter)
- AXIUS Steering, Reservoir and Front Lifting Eye, Gen I
- Closed Cooling System (Alpha)
- Closed Cooling System (Bravo)
- Closed Cooling System (BRAVO) Sea Pump Hoses
- Closed Cooling System (BRAVO) Sea Pump Hoses (SeaCore)
- Closed Cooling System, Heat Exchanger
- Closed Cooling System, Poppet Valve
- Cool Fuel System, Bravo
- Cylinder Block, Camshaft and Crankshaft
- Cylinder Block, Flywheel Housing and Rear Main Seal
- Cylinder Head Assembly
- Distributor and Ignition Components
- Electrical Components, Digital Throttle and Shift
- Electrical Components, Mechanical Throttle and Shift
- Engine Mounts
- Exhaust Manifold and Elbow
- Exhaust System Components
- Front Cover and Circulating Pump
- Fuel Filter, Alpha
- Fuel Module Components -Bravo
- Fuel Supply Module, Alpha
- Gasket Set Components (27- 75611A03), Cylinder Head
- Gasket Set Components, Engine Overhaul
- Gear Lube Monitor
- Intake Manifold and Fuel Rail
- Jackshaft Main Kit
- Mercathode Components
- Oil Pan and Oil Pump
- Pistons and Connecting Rods
- Remote Oil Filter Assembly
- Rocker Cover
- Sea Water Pump Assembly
- Shift Bracket, Alpha
- Shift Bracket, Bravo
- Shift Bracket, Digital Throttle and Shift - Axius
- Standard Cooling System (Alpha), Single and 7 Point Drain
- Standard Cooling System (Bravo), Air, 3 and 7 Point Drain
- Standard Cooling System, Sea Pump Hoses
- Starter Motor
- Steering Components
- Thermostat and Housing, Closed Cooling
- Thermostat and Housing, Standard Cooling
- Throttle Body, Digital Throttle and Shift
- Throttle Body, Mechanical
- Water Distribution Housing
| Ref. | OEM Part # | Hardin # | Mallory # | GLM # | Other # | Description | Num Req. | Superceded From | Special Notes | |
| 1 | 885164 | MANIFOLD, Intake, Lower | 1 | SN# 1A064824 & Below | ||||||
| 1 | 885164001 | MANIFOLD, Intake, Lower | 1 | SN# 1A064825 & Up | ||||||
| 2 | 22-12524 | PLUG, (.375-18 x .475) Brass | 1 | |||||||
| 3 | 27-807473A1 | 676-9-61213 | GASKET SET, Intake Manifold | 1 | ||||||
| 4 | 10-808010 | SCREW, (.312-18 x 1.375) | 8 | |||||||
| 5 | 885167 | MANIFOLD, Intake, Upper | 1 | |||||||
| 6 | 27-885168 | GASKET, Intake Manifold | 1 | |||||||
| 7 | 10-885166 | SCREW | 13 | |||||||
| 8 | 885165 | SENSOR, Manifold Air Pressure and Temperature | 1 | |||||||
| 9 | 25-881733 | SEAL | 2 | |||||||
| 10 | NSS | NOT SOLD SEPARATE, Bracket | 1 | This Part is not sold separately Component of | 885164 | |||||
| 11 | 10-885180 | SCREW | 4 | |||||||
| 12 | 8M0070997 | FUEL RAIL ASSEMBLY | 1 | 885173 | ||||||
| 13 | 885174 | REGULATOR, Fuel Pressure | 1 | |||||||
| 14 | 885175 | CLIP, Retaining | 1 | |||||||
| 15 | 885176 | INJECTOR | 8 | SN# 1A064824 & Below | ||||||
| 15 | 879312003 | INJECTOR | 8 | SN# 1A064825 & Up | ||||||
| 16 | 885177 | RETAINER, Injector | 1 | |||||||
| 17 | 25-892609 | O-RING KIT | 1 | |||||||
| 18 | 885178 | VALVE, Fuel Pressure Service | 1 | |||||||
| 19 | 885179 | CAP, Fuel Pressure Sevice Valve | 1 | |||||||
| 20 | 10-885180 | SCREW | 4 | |||||||
| 21 | 32-8M0063567 | HOSE, (58.00 Inches Bulk), Cut to Appropriate Length | 2 | 32-80617382 | ||||||
| 22 | 22-806689 | FITTING, Tee | 1 | |||||||
| 23 | 22-37372 | PLUG, Pipe (.500) | 1 | |||||||
| 23 | 22-806242 | CONNECTOR, Barb | 1 | Closed Cooling | ||||||
| 24 | 22-866157 | PLUG, EGR Port | 1 | |||||||
| 25 | 22-8623601 | PLUG, Fuel Rail Block Off | 1 | |||||||
| 26 | 22-863432T | FITTING, 90 Degree Vent | 1 | |||||||
| - | 27-861246A05 | GASKET SET, Engine Overhaul | 1 |