Your shopping cart is currently empty.
Bravo Two - Serial 0B664190 Thru 0F729999 - Universal Joint
Other Sub-Sections:
- Bell Housing
- Continuity Kit
- Drive Unit Chart
- Driveshaft Housing And Drive Gears
- Gear Housing (Bravo I)
- Gear Housing (Bravo II)
- Gear Housing (Bravo III)
- Gimbal Housing
- Gimbal Housing Cover
- Gimbal Ring And Steering Lever
- Hydraulic Pump
- Hydraulic Pump And Bracket
- Mercathode Kit
- Oil Reservoir Components (Round Oil Bottle)
- Oil Reservoir Components (Square Oil Bottle)
- Power Steering Components (Old Design)
- Power Trim Cylinder Repair Kits
- Transom Plate And Shift Cable
- Trim Cylinders And Hydraulic Hoses
- Universal Joint
Ref. | OEM Part # | Hardin # | Mallory # | GLM # | Other # | Description | Num Req. | Superceded From | Special Notes |
1 | 37-15167A90 | DECAL SET | 1 | (BRAVO I) | |||||
1 | 37-13722A90 | DECAL SET | 1 | This Part is No Longer Available (BRAVO II) | |||||
1 | 37-805338A93 | DECAL SET | 1 | (BRAVO III) | |||||
2 | 12717A1 | 525-12717A1 | COVER ASSEMBLY, Rear | 1 | |||||
3 | 12708 | 525-12708 | SEAL | 1 | 9 | ||||
4 | 865711A02 | 525-865711A02 | DETENT ASSEMBLY | 1 | 14497A2 | ||||
5 | 10-58640 | SCREW, (.375-16 x 1.25) | 2 | ||||||
6 | 10-87158 | 525-10-87158 | SCREW, (.375-16 x 1.875) | 1 | |||||
7 | 805261A1 | 525-805261A1 | WEAR PAD KIT | 1 | |||||
8 | 12711 | 700-21418 | 525-12711 | SHAFT | 1 | ||||
9 | NSS | NOT SOLD SEPARATE, Shifter Cam (Part of Gear Kit) | 1 | This Part is not sold separately SN# 0F345867 & Below | |||||
9 | 52-807375A1 | CLUTCH AND CAM KIT | 1 | This Part is No Longer Available (Refer to Service Bulletin 2001-17 for Replacement Parts) SN# 0F345868 & Up | |||||
10 | NSS | NOT SOLD SEPARATE, Shifter Yoke (Part of Gear Kit) | 1 | This Part is not sold separately SN# 0F345867 & Below | |||||
10 | NSS | NOT SOLD SEPARATE, Shifter Yoke | 1 | This Part is not sold separately SN# 0F345868 & Up | |||||
11 | 10-805733 | SCREW, (.250-28 x 1.00) | AR | 14 | |||||
11 | 10-64253 | SCREW, (.250-28 x 1.250) | AR | 14 | |||||
12 | 23-12706 | 525-23-12706 | SPACER, (.194 x .375) | 2 | |||||
13 | 11-826709109 | 525-11-826709109 | NUT, (.250-28) | 2 | 11-35045 | ||||
14 | 861175A2 | LEVER, Shift | 1 | 12712 | |||||
15 | 10-38615 | 525-10-38615 | SCREW, (.250-28 x .750) | 1 | (Shift Lever) | ||||
15 | 10-805543 | SCREW, (1.25 inch) | 1 | (Shift Cam) | |||||
16 | 861175A2 | 525-861175A2 | LINK BAR | 1 | 164592 | ||||
18 | 12-20583 | 525-12-20583 | WASHER | 1 | |||||
19 | 18-210711 | COTTER PIN | 1 | 18-21071 | |||||
20 | 86776 | 525-86776 | LATCH | 1 | |||||
21 | 864244A2 | UNIVERSAL JOINT, Coupling Yoke Has 2 O-Rings | 1 | 12784A4 | |||||
22 | 59830A7 | YOKE ASSEMBLY, Coupling Yoke Has 2 O-Rings | 1 | 59830A1 | |||||
23 | 25-25439 | 676-9-76505 | O-RING, (.862 x .103), Coupling Yoke Has 2 O-Rings | 2 | 9 | ||||
24 | 393831 | SOCKET, Center, Coupling Yoke Has 2 O-Rings | 1 | 39383T | |||||
25 | 75832T1 | 676-9-72405 | 700-28030 | CROSS AND BEARING, Coupling Yoke Has 2 O-Rings | 2 | 75832A3 | |||
26 | 12784 | 676-9-72402 | 700-28340 | YOKE, Gear End (Coupling Yoke Has 2 O-Rings) | 1 | 12784T | |||
21 | 864244A2 | UNIVERSAL JOINT ASSEMBLY, Coupling Yoke Has 2 O-Rings | 1 | 12784A10 | |||||
22 | 59830A7 | YOKE ASSEMBLY, Coupling Yoke Has 2 O-Rings | 1 | ||||||
23 | 25-25439 | 676-9-76505 | O-RING, (.862 x .103), Coupling Yoke Has 2 O-Rings | 2 | |||||
23 | 25-35027 | 700-81180 | 525-25-35027 | O-RING, (1.046), Coupling Yoke Has 2 O-Rings | 1 | ||||
24 | 393831 | SOCKET, Center, Coupling Yoke Has 2 O-Rings | 1 | 39383T | |||||
25 | 75832T1 | 676-9-72405 | 700-28315 | CROSS AND BEARING (COUPLING YOKE HAS 3 O-RINGS) | 2 | 75832A3 | |||
26 | 12784 | 676-9-72402 | 700-28340 | YOKE, Gear End (Coupling Yoke Has 2 O-Rings) | 1 | 12784T | |||
27 | 11-92004 | RING NUT | 1 | ||||||
28 | 86779A1 | 700-28372 | CARRIER ASSEMBLY, Seal | 1 | |||||
29 | 26-807006 | 700-86730 | SEAL, Oil | 1 | 26-18816 | 9 | |||
30 | 12-41613 | WASHER | 1 | ||||||
31 | 25-861844 | 525-25-861844 | O-RING, (3.609 x .139) | 1 | 25-97386 | 9 | |||
32 | 86780 | RING, Sealing | 1 | ||||||
33 | 31-86763A2 | 700-21525 | BEARING ASSEMBLY, Tapered Roller | 1 | |||||
34 | 43-826642T | GEAR (1.50:1 - 2.00:1 Ratio) (1.65:1 Ratio/BRAVO III) | 1 | 43-99227T | This Part is No Longer Available (27 TEETH - MATES WITH 32 TOOTH DRIVE GEAR) | ||||
34 | 43-815661T | GEAR, Pinion (1.81:1 - 1.36:1 Ratio) | 1 | This Part is No Longer Available | |||||
34 | 43-818664 | GEAR, Pinion (2.20:1 Ratio) (1.65:1 Ratio/BRAVO I) | 1 | This Part is No Longer Available (23 TEETH - MATES WITH 30 TOOTH DRIVE GEAR) | |||||
35 | 12-44539 | WASHER | 1 | ||||||
36 | 11-22339 | 700-28360 | 525-11-22339 | NUT, (.625-18) | 1 | 11-97522 | |||
37 | 821630Q1 | 700-12712 | 525-821630Q1 | ANODE ASSEMBLY | 1 | 821630A1 | |||
38 | 10-65210 | 525-10-65210 | SCREW, (.375-16 x 1.00) | 2 | |||||
39 | 13-35479 | 525-13-35479 | LOCKWASHER, (.375) | 2 | |||||
- | 26-16709A2 | 700-87480 | SEAL KIT | - |