516-9800-006-11 Remote Dual Battery Switch
- Ignition protected - Safe for installation aboard gasoline powered boats
- Case design allows surface, front panel, or rear panel mounting
- Isolating cover with snap-on sections protects rear contacts
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Ideal for marine or RV applications
- All non-corrosive marine grade metals
- Molded in durable reinforced polycarbonate
- Tactile textures indicate knob position by feel only
- Label with international ON/OFF legends
- Removable key or knob remains positively retained
- ICON label set included for circuit identification
- Same as Blue seas 6006 model
|
|
516-9800-007-11 Remote Battery Selector Switch
- Ignition protected - Safe for installation aboard gasoline powered boats
- Case design allows surface, front panel, or rear panel mounting
- Isolating cover with snap-on sections protects rear contacts
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Ideal for marine or RV applications
- All non-corrosive marine grade metals
- Molded in durable reinforced polycarbonate
- Tactile textures indicate knob position by feel only
- Label with international ON/OFF legends
- Removable key or knob remains positively retained
- ICON label set included for circuit identification
|
|
516-9800-011-11 Remote Two Circuit Battery Selector Switch
- Ignition protected - Safe for installation aboard gasoline powered boats
- Case design allows surface, front panel, or rear panel mounting
- Isolating cover with snap-on sections protects rear contacts
- 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals
- 7/8" (22.22mm) stud length to accept multiple cable terminals
- Ideal for marine or RV applications
- All non-corrosive marine grade metals
- Molded in durable reinforced polycarbonate
- Tactile textures indicate knob position by feel only
- Label with international ON/OFF legends
- Removable key or knob remains positively retained
- ICON label set included for circuit identification
|
|
516-3000-4001A Dual USB Port Charger Socket
- 12V DC Dual USB Charger dash mount with protective cap
- USB Female port
- USB-C Female port
- Compatible with popular mobile devices
- Easy to use
- Max output charge 4.8A DC total (2.4A Per Port)
- Output Voltage 5V DC+/- 5%
- Hole Size: 1"
|
|
516-9805-006-1 The Motorized Battery Switch has two modes of operation. Auto and Manual. There is a LED located on the battery switch to indicating Battery Switch Status.
Auto Operation:
The Battery Switch moves from a state of "Auto Off" to
"Auto On" when the remotely mounted switch is turned on. During the time that the battery switch is in "Auto On" mode, the "Auto On" LED is illuminated.
Auto operation of the battery switch is not possible whilst in manual mode. If auto operation is attempted, the LED will flash for 3 seconds then stop. Knob must
be returned to "Auto Off" before normal auto operation can continue.
Manual Operation:
The automatic operation of this battery switch can be overridden at anytime by depressing the control knob and turning clockwise towards the "Man On" position or counter clockwise towards the "Man Off" position. During the time that the Battery switch is in "Man On" mode, the "Man On" LED is illuminated.
|
|
516-9805-006-4 The Motorized Battery Switch has two modes of operation. Auto and Manual. There is a LED located on the battery switch to indicating Battery Switch Status. This is a Ground activated Battery Switch, Same as 516-9805-006-1 but this
is activated by a ground, whereas the 516-9805-006-1 is activated by +12V.
Auto Operation:
The Battery Switch moves from a state of "Auto Off" to
"Auto On" when the remotely mounted switch is turned on. During the time that the battery switch is in "Auto On" mode, the "Auto On" LED is illuminated.
Auto operation of the battery switch is not possible whilst in manual mode. If auto operation is attempted, the LED will flash for 3 seconds then stop. Knob must
be returned to "Auto Off" before normal auto operation can continue.
Manual Operation:
The automatic operation of this battery switch can be overridden at anytime by depressing the control knob and turning clockwise towards the "Man On" position or counter clockwise towards the "Man Off" position. During the time that the Battery switch is in "Man On" mode, the "Man On" LED is illuminated.
|
|
516-9805-006-7 The VSS (Voltage Sensitive Switch) Motorized Battery Switch performs an automated paralleling function during charging, which allows two separate batteries to be charged as one.
-
Auto Engagement of VSS:
When the charging source is higher than 13.7VDC for
more than 5 seconds, the VSS will engage.
- Auto Disengagement of VSS:
When the battery drop under 12.2VDC, VSS will be disengaged.
- Same as BEP 58647
Emergency Parallel Function: The VSS Emergency Parallel Function can be operated through a remotely mounted momentary switch or button. The VSS will remain in parallel mode for 10 minutes. If after 10 minutes the voltage on either has not reached 13.0V the VSS will disengage. If the voltage reaches 13.0V on either battery the VSS will remain engaged and both batteries will continue to be charged. At any time depressing and holding momentary switch or button for 5 seconds will disengage the VSS.
Manual Override: The automatic operating of the VSS can be overridden at anytime by depressing the control knob and turning clockwise towards the "Manual On" position or anti clockwise towards the "Manual Off" position. Once the VSS attempts an automated function whilst in manual override, it determines it is in manual override (On or Off) and the LED will start flashing rapidly.
|
|
516-3000-1012 Dual USB Port Charger Socket
- 12V DC Dual USB Charger dash mount with protective cap
- Twin USB 2.0 Female ports
- Compatible with popular mobile devices
- Easy to use
- LED lit by blue LED's
- Max output charge 4.8A DC total (2.4A Per Port)
- Output Voltage 5V DC+/- 5%
- Hole Size: 1"
- Thread Length: 1-5/8"
|
|
516-2000 Add a 12 volt receptacle to your boat so you can use 12v accessories such as battery / phone chargers
|
|
516-2100 Add a 12 volt receptacle to your boat so you can use 12v accessories such as battery / phone chargers
|
|
740-74103 Battery Terminal Disconnect Switch
One turn of the knob disconnects the battery and saves the solid state
regulator and alternator when charging. Switch is rated at 100 amps for 12 or 24
DC use.
|
|
464-415210-1 BATTERY TERMINAL WING NUT STYLE
Seadog 415210-1 Wing Nut Style Battery Terminal
Features:
- Includes Positive/Negative set
- Die cast lead construction
- Sold in pairs
|
|
780-8501-DP Remote Dual Battery Switch
These switches permits selection between either one of
two batteries or operation of both batteries in parallel.
Battery switches allow you to protect your battery from
unsuspecting electrical draws.
USE COUPON CODE FREEBATTERYSWITCH TO GET THIS ITEM FREE WHEN PURCHASHING SELECT BILLET OR CAST ALUMINUM BATTERY BOXES. SEE RELATED ITEMS FOR ELIGIBLE BATTERY BOXES. NOTE: To take advantage of this offer, add an eligible battery box to your cart and then type the coupon code in the coupon code field at checkout, this will add switch to your cart at $0. Do not add switch to cart and then enter coupon code.
|
|
780-8502-DP Remote Dual Battery Switch with Key Lock
These switches permits selection between either one of
two batteries or operation of both batteries in parallel.
Battery switches allow you to protect your battery from
unsuspecting electrical draws.
|
|
464-9003E Battery Switch On/Off
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
|
|
464-9001E Battery Switch "e" Dual Circuit
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
- Switch Positions: 2
- Battery Inputs: 2
- Make-before-break contact design
|
|
464-9002E Battery Switch 4-Pos AFD
The Blue Sea Systems e-Series Battery Switches have a 350 AMP continuous rating for diesel and inboard gasoline engines. They come with tin-plated copper studs for corrosion resistance and maximum conductivity. The one-piece terminal stud design will never loosen over time, and the 7/8" stud length accepts multiple cable terminals. The case design allows surface or rear panel mounting options and fits most Perko and Guest low Amperage battery switch hole patterns. The tactile indicator conveys knob position by feel and is labeled with international legends.
- Switch Pos.: 2
- Battery Inputs: 2
- Make-before-break contact design
- Alternator Field Disconnect
|
|
464-6007 Battery Switch Mini Selector
The Blue Sea Systems M-Series Mini Battery Switches are 300 AMP continuous rating for outboards and small diesel or gasoline engines. They have tin-plated copper studs for corrosion resistance and maximum conductivity as well as one-piece terminal stud design that will never loosen over time. 7/8" stud length accepts multiple cable terminals and isolating cover with three snap-in side pieces protects rear contacts and allows wire access in any direction. Case design allows surface, rear, or front panel mounting options and studs accept 3/8" (M10) ring terminals. They are labeled with international legends - 6 ICON label set included for circuit identification (6005 includes illustrated ON-OFF label only). Some models feature a removable knob that remains positively retained with a tactile indicated that conveys position when removed.
|
|
464-6006 Battery Switch Mini Single Circuit
The Blue Sea Systems M-Series Mini Battery Switches are 300 AMP continuous rating for outboards and small diesel or gasoline engines. They have tin-plated copper studs for corrosion resistance and maximum conductivity as well as one-piece terminal stud design that will never loosen over time. 7/8" stud length accepts multiple cable terminals and isolating cover with three snap-in side pieces protects rear contacts and allows wire access in any direction. Case design allows surface, rear, or front panel mounting options and studs accept 3/8" (M10) ring terminals. They are labeled with international legends - 6 ICON label set included for circuit identification (6005 includes illustrated ON-OFF label only). Some models feature a removable knob that remains positively retained with a tactile indicated that conveys position when removed.
|
|
464-7650 Add-A-Battery, Dual Circuit Sys
The Blue Sea Systems Add-A-Battery Dual Circuit System automates charging and simplifies switching for a complete two battery bank solution.
Kit Includes:
- Dual Circuit Plus(TM) Battery Switch
- Simplifies battery switching
- Isolates engine and house circuits
- Combines battery banks for emergency starting
- 120 AMP SI Automatic Charging Relay
- Automatically combines battery banks during charging
- Isolates battery banks when discharging and when starting engines
|
|