Switches, Knobs and Bezels - Push Button Switches

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts! The harness plug is easily removed for quick switch type changes and the connection is waterproof. The entire stainless steel switch body is threaded for use in dashes up to 1.5" thick.

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Ultra Bright LED's
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug and Wire Harness with 12" wire lead INCLUDED.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch
  

The latest in LED lit electronic switches from Bluewater Enterprises. These switches have built in breakers which can be set at positions from 0 to 20 Amps. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts! The harness plug is easily removed for quick switch type changes and the connection is waterproof. The entire stainless steel switch body is threaded for use in dashes up to 1.5" thick.

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• 8 programmable Amp positions: 3,5,6,7.5, 10, 15,20,0.
• Programmed by default at 5 Amp. We can factory reprogram for a small fee.
• Reprogramming only to be performed by authorized installers and dealers.
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug and Wire Harness with 12" wire lead INCLUDED.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from.

• 15 AMP Rating
• Multiple Switch Options
• 100 + Label Options
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug and Wire Harness with 12" wire lead INCLUDED.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• When using translucent buttons, labels are sold separately here.
• NOTE: Momentary Switch should not be used as an Engine Start switch

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts! The harness plug is easily removed for quick switch type changes and the connection is waterproof. The entire stainless steel switch body is threaded for use in dashes up to 1.5" thick.

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Laser Etched Logos available
• Ultra Bright LED's
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug with wire connections is INCLUDED. No wire is included.
• Great choice for building a switch panel with your own wiring
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch
  

The latest in LED lit electronic switches from Bluewater Enterprises. These switches have built in breakers which can be set at positions from 0 to 20 Amps. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts! The harness plug is easily removed for quick switch type changes and the connection is waterproof. The entire stainless steel switch body is threaded for use in dashes up to 1.5" thick.

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• 8 programmable Amp positions: 3,5,6,7.5, 10, 15,20,0.
• Programmed by default at 5 Amp. We can factory reprogram for a small fee.
• Reprogramming only to be performed by authorized installers and dealers.
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug with wire connections is INCLUDED. No wire is included.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons so you change functions easily. This version is sold without a wire harness for users who want to build their own wiring harnesses. See related parts. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts!

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Ultra Bright LED's
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug and Wire Harness ARE NOT INCLUDED.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch
  

The latest in LED lit electronic switches from Bluewater Enterprises. These switches have built in breakers which can be set at positions from 0 to 20 Amps. These switches feature easily swappable buttons so you change functions easily. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts! The harness plug (sold separate) is easily removed for quick switch type changes and the connection is waterproof. The entire stainless steel switch body is threaded for use in dashes up to 1.5" thick.

• 20 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• 8 programmable Amp positions: 3,5,6,7.5, 10, 15,20,0.
• Programmed by default at 5 Amp. We can factory reprogram for a small fee.
• Reprogramming only to be performed by authorized installers and dealers.
• Multiple Switch Options
• 100 + Label Options
• Switch button can be removed and replaced.
• 120A Inrush Surge Protection
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• Plug and Wire Harness are NOT INCLUDED.
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• NOTE: Momentary Switch should not be used as an Engine Start switch

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons so you change functions easily. This version is sold without a wire harness for users who want to build their own wiring harnesses. See related parts. There are over 100 Switch Function Icons to choose from.

• 15 AMP Rating
• Multiple Switch Options
• 100 + Label Options
• Laser Etched Logos available
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• WIRE HARNESS IS NOT INCLUDED!
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.
• When using translucent buttons, labels are sold separately here.
• NOTE: Momentary Switch should not be used as an Engine Start switch

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons (sold separately) so you change functions easily. This version is sold without a wire harness for users who want to build their own wiring harnesses. See related parts. There are over 100 Switch Function Icons to choose from,  and for an extra touch, our 7/8" bezels fit these perfectly, see the related parts!

• 120 AMP Rating (1 Channel), 10 AMP Rating (2 Channel)
• Multiple Switch Options
• 100 + Label Options
• 120A Inrush Surge Protection
• Transparent and Laser Etched Button Logos available separately
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• WIRE HARNESS IS NOT INCLUDED!
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.

The latest in LED lit electronic switches from Bluewater Enterprises. These switches feature easily swappable buttons (sold separately) so you change functions easily. This version is sold without a wire harness for users who want to build their own wiring harnesses. See related parts. There are over 100 Switch Function Icons to choose from.

• 15 AMP Rating
• Multiple Switch Options
• 100 + Label Options
• Transparent and Laser Etched Button Logos available separately
• IP69K Waterproof Rated
• 316 Stainless Steel Body
• Electronic Actuator
• Mechanically rated for 50,000 cycles
• Switches are LED Backlit
• WIRE HARNESS IS NOT INCLUDED!
• Caution: Momentary switch applications controlling solenoids may require a 5 amp diode on the output wire of the switch in order to prevent damage to the mosfet switch circuit.

These stainless steel switches can transform any dash by adding a touch of modern flair and is available in both a Standard On/Off contact or a Momentary On/Off contact version. The body design gives this button switch a waterproof rating of IP67. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let you know that function is on without question. The included wiring harness is clipped on. Labels are available to identify functions, see related parts.

These are easily swappable buttons so you change functions easily on 22mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.

• 100 + Label Options
• Laser Etched Logos available
  
• When using translucent buttons, labels are sold separately here.
• 0.695" O.D.

These are easily swappable buttons so you change functions easily on 19mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.

• 100 + Label Options
• Laser Etched Logos available
  
• When using translucent buttons, labels are sold separately here.
• 0.576 O.D.

Function Labels for 19MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 19mm switches with the translucent label option

Function Labels for 22MM Push Button Switches 

Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.

• Over 100 Interchangeable 3M Adhesive Backed PU Dome Backlit Function Icon Labels to choose from.
• Light passes through clear part of label
• Used with 22mm switches with the translucent label option

Deutsch Plug with 12" Wire lead for 19mm and 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

Daisy Chain Connectors for LED and Ground on Bluewater Switches 19mm and 22mm

(516-9050-0030) Blue is to daisy chain the LED wires on Bluewater Switches. (516-9050-0025) Black is to daisy chain the Ground wires on the Bluewater Switches. (516-9050-0035) Orange is to daisy chain the Power wires on the Bluewater Switches.

Deutsch Plug with 36" Wire lead for 22mm Switches

These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.

This is a replacement plug with lead for the 516-9150-XXXX 19mm switches.