This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> These are easily swappable buttons so you change functions easily on 19mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> These are easily swappable buttons so you change functions easily on 22mm Bluewater Switches with Removable Buttons. There are over 100 Switch Function Icons to choose from.
|
|
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Function Labels for 19MM Push Button Switches
Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.
Features & Benefits:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Function Labels for 22MM Push Button Switches
Identifying the function of each push button switch is simple with the interchangeable 3M adhesive backed actuator PU Dome Backlit Labels. These labels are used when using translucent actuator buttons that allows the LEDs in the switch body to pass light through the label. The result is excellent visibility at night. There are over 100 Switch Function Icons to choose from.
Features & Benefits:
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Deutsch Plug with 12" Wire lead for 19mm and 22mm Switches
These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Deutsch Plug with 36" Wire lead for 22mm Switches
These plugs are required if you buy switches without wire harnesses. This will allow you to splice together your boat's wiring harness to the switch.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Deutsch Plug ONLY for 19mm and 22mm Switches
These plugs are required if you buy switches without wire harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the plug only. No wiring or connectors are included.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Stainless Steel Nut for 19mm and 22mm Switches
Replace the stock plastic nut with these stainless steel nuts for extra durability and longevity.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Replacement Plastic Nut for 19mm and 22mm Switches
Replacement for the stock plastic nut on Bluewater switches.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> This tool allows you to easily install the nut on the back of your switch. Can be used with 1/4" drive ratchet.
|
|
516-9050-0015 These dummy plugs are used in the switch Deutsch connectors when you are not using one of the wire holes.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Small and Large Connector Pins for 19mm and 22mm Switches
These pins are required if you want to build your own harnesses. This will allow you to build your own harnesses with wiring to your spec. These are the connectors only. No wiring or plugs are included.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Daisy Chain Connectors for LED and Ground on Bluewater Switches 19mm and 22mm
(516-9050-0030) Blue is to daisy chain the LED wires on Bluewater Switches. (516-9050-0025) Black is to daisy chain the Ground wires on the Bluewater Switches.
|
|
516-1400-000-001 This marine grade electrical choke prevents voltage spikes – caused by noisy loads – from potentially damaging or preventing Bluewater push button switches (and other MOSFET driven push button switches) from entering In Rush protection mode.
It is highly recommended for switches that control constant pressure washdown pumps commonly used in freshwater systems.
The electrical choke houses two coils which dampen the alternating transient signals coming from your noisy loads like washdown pumps; providing a clean flow of DC power to your switch.
To install the choke, simply butt connect the ends in series with the output of the switch; Preferably as close to the pump as possible, but can be done anywhere between the switch output and the load device in the positive conductor.
INTENDED SWITCH USAGE:
- Wash down
- Raw Water
- Fresh Water
|
|
516-9050-0020 This tool allows you to crimp Deutsch connector pins to 14-24 AWG Wire
|
|
![Capacitor Assembly for Bluewater Electronic Switches](/images/product/icon/516-1406-000-001.jpg)
516-1406-000-001 Relays and Bi-Stable relays such as a Remote Battery Switch or Charge Control Relay exhibit
similar behavior as above only have low amperage requirements in some cases less than 250 milliamps
not even 1 Ampere required by the device. But the bounce or magnitude of the resulting EFT (electrical
fast transient) when being switched can be excessively high.
LED Lights, not all but some have internal power controllers. Others have basic switching
drivers and have high noise or EFT (electrical fast transients) present while operating and when being
switched on of a high magnitude and are expected; some are harsher than others. Could be very small
LED’s or large spreader LED lights; either could have similar negative electronic behavioral effects. Again,
even ones that consume less than 1 amp could be a significant contributor to faults.
None of the above has to do with the quality of a particular manufacturer it simply is an inherent
characteristic of the referenced devices. However, there is a simple solution. Again, typically there is one
switch or device when being turned on or operating that is attributing to In-Rush fault indication and
easily identified. Typically, when being turned on or off however in the LED example it may not occur
until after a long period of operation when voltage is depleted or temperature increases. In both
examples B & C a 16V 1000uF electrolytic capacitor Part ID: 1406-000-001 can be installed across the
Line V+ and Ground near the switch to correct the issue creating the fault.
|
|