Heavy Duty & Performance Marine Starters - Chevy

1.4 HP Chrome Mini Super Starter

This chrome plated high performance mini starter has been a leading choice of performance boaters. Top quality components along with a ball bearing design produces a starter that is durable even in hot temperature conditions. This starter is rated at 1.4 HP of cranking power which is nearly 40% stronger than traditional OEM Delco style starters

USCG Approved (SAE J1171)

Replacement Starter Gear and Spring for 620-10058, 620-10059, 620-10060 and other 9 tooth  starters

200 Foot Pound Bottom Mount Starter - Fits Both Small & Big Block Chevy Engines

This is the best choice for highly modified engines or where heat soak or space limitation is a concern. 200 lbs. of torque. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression. Machined Billet Block Adapter, Clears Most Oil Pans. Includes two mounting bolts.

USCG Approved (SAE J1171)

Delco PMGR Series Starter Clockwise Rotation

Fits 12-3/4" flywheel with parallel bolt pattern. MerCruiser, Marine Power & OMC late models. 12Volt - 11 tooth. MerCruiser #50-806963A4.

BRAND NEW STARTERS - ALL UNITS MEET OR EXCEED OEM SPECIFICATIONS
Please Note: Direction of rotation is determined as to viewing the starter from the drive end.

• Rotation CW
• kW 1.4
• Gearing 4.44 to 1
• Rotatable Yes
• Voltage 12v

USCG Approved (SAE J1171)

High Torque - Top Mount Starter, Counter Clockwise Rotation

Hardin Marine introduces the new High Torque, Top Mount Starter. This starter features 5 full roller bearings, and a heat dissipating solenoid designed to eliminate the “hot start” syndrome. It features a 9 tooth pinion gear. Fits applications with a 4" center to center mounting hole dimension. The sealed drive assembly prevents debris from entering the starter motor. Counter Clockwise Rotation. This reliable starter will have your boat turning over every time for years to come. Needs .040-.100 clearance between the edge of the starter gear to the edge of the flywheel when the starter is not engaged. The starter gear should use 90% of the ring gear when the starter is engaged.

• 4 to 1 gear reduction
• 1.4KW/ 1.9HP

USCG Approved (SAE J1171)

Please Measure Before Ordering:


• Short: For engines that have 1.75 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.


• Long: For engines that have 2.20 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.


• Dual Cooler Bellhousing: For engines that use the Hardin Marine 755-8054 Dual Cooler Bellhousing Kit and that have 2.13 inches from the bellhousing starter mounting surface to the starter side edge of the flywheel.

Clockwise Rotation

Fits 4, 6 & 8 cylinder engines with 12-3/4" flywheel bottom mount and straight bolt pattern.

Counter Clockwise Rotation

Fits 4, 6 & 8 cylinder engines with 12-3/4" flywheel bottom mount and straight bolt pattern.

Clockwise Rotation

Fits 6 & 8 cylinder engines with 14-1/4" flywheel and offset bolt pattern.

Counter Clockwise Rotation

• Fits 6 & 8 cylinder engines with 14-1/4" flywheel and offset bolt pattern.
• Fits Reverse Rotation Engines
• Fits Mercruiser, OMC, Volvo Penta & others using a GM Block 6-8 Cylinder w/ a 14 1/4" Flywheel
  
• Replaces Merc #"s 50-12121A2, 50-12177A2, 50-806964A3, 50-806964A4, 50-812428A3, 50-812604A2, 50-99418A2. OMC #'s 984456, 986505, 3850525, 3853982, 3855177
• Staggered Bolt Pattern
• Note: This starter uses SW-90 12V solenoid

MerCruiser, Cobra, Yamaha, PMGT Starter Clockwise Rotation

Fits 14-1/4" flywheel and offset bolt pattern. New permanent magnet gear reduction. Original Mercury numbers - 50-812428A3,50-812604A2, 50-822330A2, 50-863007A1

BRAND NEW STARTERS - ALL UNITS MEET OR EXCEED OEM SPECIFICATIONS
Please Note: Direction of rotation is determined as to viewing the starter from the drive end.

New Super Duty Gear Reduction Starter For MerCruiser & OMC ClockwiseRotation

Fits 4 & 6 cylinder engines with standard (10mt) solenoid.

BRAND NEW STARTERS - ALL UNITS MEET OR EXCEED OEM SPECIFICATIONS

Starter for LS Engines - Black - Pertronix S3002B-M

This starter features a special sleek design that looks great in all engine installations. This starter combines form and function with the fully enclosed solenoid protecting key components from the elements and damaging heat. This starter is designed so that the body can rotated for improved clearance around headers and other parts in tight engine bays. Built with all new parts the Contour starters feature a powerful Nippondenso motors with a 4.4:1 gear ratio and over 200 foot pounds of torque to handle high compression engines with ease. This starter is black powder coated.

US Coast Guard Approved SAE J1171 Certified

Starter for Chevy LS Engines - Polished - Pertronix S3002P-M

This starter features a special sleek design that looks great in all engine installations. This starter combines form and function with the fully enclosed solenoid protecting key components from the elements and damaging heat. This starter is designed so that the body can rotated for improved clearance around headers and other parts in tight engine bays. Built with all new parts the Contour starters feature a powerful Nippondenso motors with a 4.4:1 gear ratio and over 200 foot pounds of torque to handle high compression engines with ease. This starter is polished.

US Coast Guard Approved SAE J1171 Certified

Starter For Chevy SB/BB - Polished - Pertronix S3000P-M

Fits 1964-2000 Chevy SB/BB and 1964-1974 L6, 230, 250, & 292 engines with a 153 or 168 tooth flywheel.

This starter features a special sleek design that looks great in all engine installations. This starter combines form and function with the fully enclosed solenoid protecting key components from the elements and damaging heat. This starter is designed so that the body can rotated for improved clearance around headers and other parts in tight engine bays. Built with all new parts the Contour starters feature a powerful Nippondenso motors with a 4.4:1 gear ratio and over 200 foot pounds of torque to handle high compression engines with ease. This starter is polished.

US Coast Guard Approved SAE J1171 Certified

Top Mount Replacement Prestolite 3-bolt Starter

This starter is used on many known jet engine manufacturers (Indmar, Hardin, etc). This is a reverse rotation starter so it can start your standard rotation motor. This is a high torque mini starter, good up to 18:1 compression engines. The starter weighs 8lbs. Replaces Prestolite #'s MDU 7016, 7022, 7033. Fits into a 3" bellhousing opening. Starter gear kicks out 0.500"

USCG Approved (SAE J1171)

Starter Bolt Kit for Staggered Bolt Pattern - USE ON LATE STYLE GEAR REDUCTION STARTERS ONLY