Outboard Hydraulic Steering - Hydrive Outboard Steering

Bullhorn type steering is by far the most popular steering system for outboard motors as it is compact, simple to install and requires the minimum amount of clearance to install in an engine well.

The Commander series (COMKIT) models are designed for use on pleasure boats only with outboard Horsepower limitations as listed below. They utilize a state of the art aluminum cylinder with unique electrolytic insulation between metals for maximum corrosion resistance.

For Pleasure boats with single outboards up to 200HP or twin outboards up to 400 HP total (counter rotating).

Kit Includes:

• (1) 501N8 Helm
• (1) 511BH Cylinder
• (2) Liters of Ultra-15 Fluid
• (15) Meters of Nylon Hydraulic Tubing
• (1) Fitting Kit
• (1) Bleeding Kit
• (1) Instruction Set

Bullhorn type steering is by far the most popular steering system for outboard motors as it is compact, simple to install and requires the minimum amount of clearance to install in an engine well.

The Commander series (COMKIT) models are designed for use on pleasure boats only with outboard Horsepower limitations as listed below. They utilize a state of the art aluminum cylinder with unique electrolytic insulation between metals for maximum corrosion resistance.

For Pleasure and Professional boats with single outboards up to 300HP or twin outboards up to 600 HP total (counter rotating).

Kit Includes:

• (1) 401N8 Helm
• (1) 511BH Cylinder
• (2) Liters of Ultra-15 Fluid
• (15) Meters of Nylon Hydraulic Tubing
• (1) Fitting Kit
• (1) Bleeding Kit
• (1) Instruction Set

Front Mount Type steering is also popular because of the lower cost, combined with the fact that the hoses are in a fixed position and do not move. The disadvantage is the amount of space required in the engine well due to the piston rod travelling in each direction.

The Commander series (COMKIT) models are designed for use on pleasure boats only with outboard Horsepower limitations as listed below. They utilize a state of the art aluminum cylinder with unique electrolytic insulation between metals for maximum corrosion resistance.

For Pleasure boats with single outboards up to 200HP only or twin outboards up to 400 HP total (counter rotating).

Kit Includes:

• (1) 501N8 Helm
• (1) 516FH Cylinder
• (2) Liters of Ultra-15 Fluid
• (15) Meters of Nylon Hydraulic Tubing
• (1) Fitting Kit
• (1) Bleeding Kit
• (1) Instruction Set

Bullhorn type steering is by far the most popular steering system for outboard motors as it is compact, simple to install and requires the minimum amount of clearance to install in an engine well.

The Commander series (COMKIT) models are designed for use on pleasure boats only with outboard Horsepower limitations as listed below. They utilize a state of the art aluminum cylinder with unique electrolytic insulation between metals for maximum corrosion resistance.

For Pleasure boats with single outboards up to 150HP only (counter rotating).

Kit Includes:

• (1) 501N8 Helm
• (1) 512BH Cylinder
• (2) Liters of Ultra-15 Fluid
• (15) Meters of Nylon Hydraulic Tubing
• (1) Fitting Kit
• (1) Bleeding Kit
• (1) Instruction Set

Bullhorn type steering is by far the most popular steering system for outboard motors as it is compact, simple to install and requires the minimum amount of clearance to install in an engine well.

The Admiral series (OBKIT) models are designed for the most robust operation in both pleasure and commercial vessels and offer the strongest and most corrosion resistant steering cylinders on the market. There is no equivalent of these cylinders available from any other manufacturer.

For Pleasure and Professional boats with single outboards up to 300HP or twin outboards up to 600 HP total (counter rotating).

Kit Includes:

• (1) 401N8 Helm
• (1) 211BH Cylinder
• (2) Liters of Ultra-15 Fluid
• (15) Meters of Nylon Hydraulic Tubing
• (1) Fitting Kit
• (1) Bleeding Kit
• (1) Instruction Set

Kit Includes:

• (1) High Oil Flow ( with sleep mode ) 12 Volt dc Electro-hydraulic constant running pump set with self cooling tank and fitting. Stainless steel base bracket with anti-vibe rubber grommets Pre- wired Power and Signal software controlled with external circuit breaker ( 3 x wire Hook Up ) 
• (1) Front mount Gerotor ( race boat type ) 3 or 4 turn Helms and fittings with immediate emergency manual helm back up system ( if battery power is lost ) Standard marine 3/4 Inch Teleflex Taper steering shaft
• (1) Bellow rubber helm cover ( fits all gerotor helm displacements )
• (1) 211 BH XT :- Brass - Chromed , Front Mounted , Outboard Cylinder with Bleeding T fittings Cast Aluminium BH Arms and all Nyloc SS Nuts & threads are Thru-Pinned for security Cylinder Bar 1/2 " S S Bushing / Stud is Thru bolted by 3/8 " ARP S S bolt into tiller arm Cylinder is electrically isolated from the O / B engine ( Zero electrolysis corrosion )

Kit Includes:

• (1) High Oil Flow ( with sleep mode ) 12 Volt dc Electro-hydraulic constant running pump set with self cooling tank and fitting. Stainless steel base bracket with anti-vibe rubber grommets Pre- wired Power and Signal software controlled with external circuit breaker ( 3 x wire Hook Up ) 
• (1) Front mount Gerotor ( race boat type ) 3 or 4 turn Helms and fittings with immediate emergency manual helm back up system ( if battery power is lost ) Standard marine 3/4 Inch Teleflex Taper steering shaft
• (1) Bellow rubber helm cover ( fits all gerotor helm displacements )
• (1) 211 BH XT SS :- Stainless Steel , Front Mounted , Outboard Cylinder with Bleeding T fittings Cast Aluminium BH Arms and all Nyloc SS Nuts & threads are Thru-Pinned for security Cylinder Bar 1/2 " SS Bushing / Stud is Thru bolted by 3/8 " ARP S S bolt into tiller arm Cylinder is electrically isolated from the O / B engine ( Zero electrolysis corrosion )

Kit Includes:

• (1) High Oil Flow ( with sleep mode ) 12 Volt dc Electro-hydraulic constant running pump set with self cooling tank and fitting. Stainless steel base bracket with anti-vibe rubber grommets Pre- wired Power and Signal software controlled with external circuit breaker ( 3 x wire Hook Up ) 
• (1) Front mount Gerotor ( race boat type ) 3 or 4 turn Helms and fittings with immediate emergency manual helm back up system ( if battery power is lost ) Standard marine 3/4 Inch Teleflex Taper steering shaft
• (1) Bellow rubber helm cover ( fits all gerotor helm displacements )
• (1) Standard Char Lynn body helms in 80, 100, 125 , 160 cc / rev to suit large volume cylinders

Kit Includes:

• (1) High Oil Flow ( with sleep mode ) 12 Volt dc Electro-hydraulic constant running pump set with self cooling tank and fitting. Stainless steel base bracket with anti-vibe rubber grommets Pre- wired Power and Signal software controlled with external circuit breaker ( 3 x wire Hook Up ) 
• (1) Front mount Gerotor ( race boat type ) 3 or 4 turn Helms and fittings with immediate emergency manual helm back up system ( if battery power is lost ) Standard marine 3/4 Inch Teleflex Taper steering shaft
• (1) Bellow rubber helm cover ( fits all gerotor helm displacements )