151-1252 Steering Wheel Mounted Trim Switch Kit , Black Plastic, with Curly Cord and Diode Kit
This trim switch is designed to fit most steering
wheels with simple two bolt drill mounting. Dual Switches. Put trim switches on steering wheel for convenience. Allows driver to keep both hands on the steering wheel for safety. Weatherproof rubber booted switches. Rugged urethane coiled cord. Can be used for trim control or jack plate control. Mounts easily on steering wheel spokes by drilling mounting holes If you do not want to drill holes you can purchase rear mounting plates separately. DOES NOT include a rear mounting plate. Kit comes with Diode Kit.
|
|
151-1250 Steering Wheel Mounted Trim Switch, Black Plastic, with Curly Cord
This trim switch is designed to fit most steering
wheels with simple two bolt drill mounting. Dual Switches. Put trim switches on steering wheel for convenience. Allows driver to keep both hands on the steering wheel for safety. Weatherproof rubber booted switches. Rugged urethane coiled cord. Can be used for trim control or jack plate control. Mounts easily on steering wheel spokes by drilling mounting holes If you do not want to drill holes you can purchase rear mounting plates separately. DOES NOT include a rear mounting plate.
|
|
151-1264 Bluetooth Controller for Bluewater Push Button Switches - Control up to 4 Functions
This control box is paired with
a transmitter that is operated entirely
by bluetooth. The transmitter will work
up to 30 ft. away from the control
box, The transmitter will operate drive
trim, trim tabs or any other
momentary switch application. DOES NOT includes switches
The switch transmitter requires a 12 volt power source and the draw is less than 5 amps. Each transmitter input is activated using +12 volts so they are compatible with any type of switch, including Bluewater. The Controller also requires a 12 volt power source with a maximum draw of up to 10 amps per switched load. Switched loads greater than 10 amps will require an external relay. Each switched output will change to + 12 volts when activated. Please note that the enclosures are not waterproof or ignition protected.
Each controller and transmitter pair have matching serial numbers so they must be kept together. The pairing uses an encrypted code and cannot be undone, or hijacked in the field. If a system requires repair we will need both the controller and the switch transmitter returned to MDC. Also, you can install as many of these systems in a single boat as you want, they will all operate independently and will not interfere with each other.
|
|
137-9864 Bluetooth Operated Paddle Trim Kit for 3/4" Tapered Shaft Mount
This paddle trim mounts to any 3/4” tapered shaft with keyway. Add a race inspired trim control quick and easy with this kit, no wires needed!
|
|
137-8607 Dual Trim Switch Bracket For Most 6-Bolt Momo Pattern Steering Wheels
This bracket will mount to most 6-Bolt Momo pattern Steering Wheels and allow the attachment of two Bluetooth Trim Switches. Bracket position is adjustable, and can be flipped one way or the other for best fit. Works best on steering wheels with equidistant spokes.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- White and Black, single or double pole Switches available separately.
- SWITCHES SHOWN NOT INCLUDED! THIS IS PANEL ONLY!
- Panels available in standard Livorsi powder coated colors
- Jack Plate, Drives or Tabs Lettering
- Dual Switch Panel
- Does not include any screws or mounting hardware
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- White and Black, single or double pole Switches available separately.
- SWITCHES SHOWN NOT INCLUDED! THIS IS PANEL ONLY!
- Panels available in standard Livorsi powder coated colors
- Jack Plate, Drives or Tabs Lettering
- Quad Switch Panel
- Does not include any screws or mounting hardware
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- White and Black, single or double pole Switches available separately.
- SWITCHES SHOWN NOT INCLUDED! THIS IS PANEL ONLY!
- Panels available in standard Livorsi powder coated colors
- Jack Plate or Tabs Lettering
- Single Switch Panel
- Does not include any screws or mounting hardware
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- White and Black, single or double pole Switches available separately.
- SWITCHES SHOWN NOT INCLUDED! THIS IS PANEL ONLY!
- Panels available in standard Livorsi powder coated colors
- Jack Plate, Drives or Tabs Lettering
- Triple Switch Panel
- Does not include any screws or mounting hardware
|
|
137-8688 Trim Sender Actuator for Mercury Verado applications.
|
|
137-8606 Single Trim Switch Bracket For Most 6-Bolt Momo Pattern Steering Wheels
This bracket will mount to most 6-Bolt Momo pattern Steering Wheels and allow the attachment of one Bluetooth Trim Switch. Bracket position is adjustable, and can be flipped one way or the other for best fit. Works best on steering wheels with equidistant spokes.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Steering Wheel Mounted Trim Switch, Carbon Fiber Top Plate, Bluetooth Operation, Aircraft Switches
This control box is paired with
a switch that is operated entirely
by Bluetooth. The switch will work
up to 30 ft. away from the control
box, The switch will operate drive
trim, trim tabs or any other
momentary switch application. DOES NOT include a mounting plate. This model contains aviation quality control switches and a carbon fiber top plate. Each switch pod requires one control box.
|
|
151-1261 Steering Wheel Mounted Trim Switch, Bluetooth Operation
This control box is paired with
a switch that is operated entirely
by bluetooth. The switch will work
up to 30 ft. away from the control
box, The switch will operate drive
trim, trim tabs or any other
momentary switch application. DOES NOT include a mounting plate. Each switch pod requires one control box.
|
|
151-1200 Steering Wheel Mounted Trim Switch, Billet Aluminum, Polished with Curly Cord
Billet aluminum trim switches designed to fit most steering
wheels with simple two bolt drill mounting. Dual Switches. Trim switch comes in polished finish. DOES NOT include a mounting plate.
|
|
137-8603 Single Trim Switch Bracket For Isotta Carlotta Steering Wheel
This bracket will mount to an Isotta Carlotta steering wheel and allow the attachment of one Bluetooth Trim Switch.
|
|
137-8604 Dual Trim Switch Bracket For Isotta Carlotta Steering Wheel
This bracket will mount to an Isotta Carlotta steering wheel and allow the attachment of two Bluetooth Trim Switch.
|
|
137-8605 Triple Trim Switch Bracket For Isotta Carlotta Steering Wheel
This bracket will mount to an Isotta Carlotta steering wheel and allow the attachment of three Bluetooth Trim Switch.
|
|
623-PTS1 For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.
Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.
FEATURES
- Available both in single and dual versions (for either two equal or two different outputs).
- Both single or dual paddle can be positioned at various angles for the most confortable choice.
- Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version).
- Max load 5 Amp @ 12VDC.
- For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay.
- Uflex® trim tabs require the use of the KTR - 42860S kit relay.
- Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”).
- Easy to install on the following Ultraflex® steering systems: front and tilt mount hydraulic helms and tilt mount mechanical helms
- Wiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately.
|
|
623-PTS2 For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.
Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.
FEATURES
- Available both in single and dual versions (for either two equal or two different outputs).
- Both single or dual paddle can be positioned at various angles for the most confortable choice.
- Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version).
- Max load 5 Amp @ 12VDC.
- For loads exceeding 5 Amp we recommend the use of the KTR - 42860S kit relay.
- Uflex® trim tabs require the use of the KTR - 42860S kit relay.
- Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”).
- Easy to install on the following Ultraflex® steering systems: front and tilt mount hydraulic helms and tilt mount mechanical helms
- Wiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
- 3" Wide x 3-1/2" Tall.
- Available with Red, White, Translucent or Black Switches.
- Panels available in Red, Blue, Purple, Black or Silver Carbon Fiber.
- REAL Carbon Fiber, not printed on.
|
|