Plash Marine Lighting

PlashLights 40W Low Profile Marine LED Spreader Light is the perfect LED light for your boats deck or work area! This light is extremely durable. Tested and designed for saltwater applications. This small 40W light is available in three different beam patterns, but it is recommended to use the linear flood beam pattern as a driving or fishing light application.

• 4 X 10W CREE® OSLON LX ECE LED’s = 40W Total
• 120° Scene Flood or 35° Linear Flood
• Lumens: 5200
• 9 ~ 36VDC3.2A @ 12VDC
• IP69K Rated
• 316 Stainless Steel Hardware
• 9ft. Power Wire for easy T-Top Install - No Connector
• DuPont® Marine Black or White Coating
• Certificates: CE, RoHS, UV, Vibration, RF Anti-Interference, Salt
• LED Lifespan: 50,000 hours or 5 years of continuous use
• Operating Temp: -40° F ~ +145°F

Surface mounted Deck Lights with an aluminum housing are dependable and very well built. I would say that they are indestructible, but I know how some of you are so I will refrain from that comment. They are super bright and made to last. These are the highest quality deck lights on the market.

Specifications:

• 3" width x 1-5/8" height x 3/8" depth , bolt hole center to center 2"
• 3W CREE® LED’s - 9W Total
• Lumens: 1,240
• 50,000 Hours Average Lifespan
• Includes a Flat Rubber Mount. 
• Optional 45° Angle Mount Sold Separately
• AkzoNobel® Polyester Powder Coat Coating
• Available in Black or White Housing
• Aluminum Housing
• Operating Temp: -40°F ~ +165° F
• Certificates: CE, RoHS, UV, Salt Spray, Vibration, RF Anti Interference
• IP68 Rated
• PlashLights Lifetime Warranty
• Each Light Includes: Two Insulation Bushings, 316 Stainless Steel Hardware, Flat Rubber Mount, 3ft Power Wire

Super compact and indirect, yet bright and efficient lighting for passageways, steps, or compartments make these LED lights ideal. The curved reflector design directs light downward, therefore eliminating any glare effect and maximizing your illumination while only protruding 3/8”.

• Light Style: Step Light
• Housing Material: Aluminum or 316 Stainless Steel
• Draw: 140mA @ 12VDC
• Voltage: 12VDC
• Lumens: 32 (61Lx @ 1 ft.)
• Viewable Angle: 150°
• Fixture Dimensions: 7/8” dia.
• Mounting Style: Press fit
• Required Cutout: 5/8” dia. (with 1-1/4” bulkhead clearance)
• 1" Diameter, 1.1" depth from flange.
• Finished Clearance: 3/8”
• Wiring: Two-conductor, 20-gauge marine grade (9ft. cable supplied)
• Environment: Prolonged marine: Waterproof & Submersible (IP68 rated)
• Warranty: Limited Lifetime

These Single Row Series Light Bars now allow you to put a light bar in the location that a double row will not fit. You can expect the same great quality from these light bars as you do from all of Plash products! The Single Row Series Light Bars feature 5W OSRAM LEDs and are simple to mount! Made with a 316 stainless steel bracket and a double nut feature that ensures stability and safety of the light. Lights have black housings except on models noted below with white housing. 6000K white LED lights.

XX-Series lens covers are designed specifically for the XX-Series double row light bars. Each cover is 10 " in length. Multiple covers will be required for longer bars. Covers are made of PC and snap on. They are durable and will not come off. No tools required. Sold individually.

Our high intensity LED surface mounted transom lighting is of the utmost quality and mounts virtually anywhere you want on the transom with just a small 3/16" hole required. Each light is built with a 60" wire tail and a simple two wire (red & black) wiring configuration. No other light manufacturer produces such a great output for underwater lighting for as reasonable price. When you hold this light you will understand the quality by the weight of the 316 stainless steel housing, but more importantly when you turn this light on you will see the quality by the light output.

Easy way to add some safety for:

• Night activities
• Swimming
• Safety for loading and unloading at night
• Great for attracting fish on your evening trips
• Easily be seen out on the water
• Extreme intensity for showing off anytime of the day
• An easy way to help your sight when loading / unloading on lifts in the dark

What a simple way to turn heads at the dock. You will be the talk of the marina or the boat ramp.

FEATURES

• 4.650 Lumens Max 
• 160° Emitting Angle
• Input Voltage: DC 12V (9V to 32V Max.)
• Factory Sealed Housing - IP68 Rated
• Current Draw:  3.7A @ 13.5VDC / 7.4A @ 13.5VDC for the pair
• 50,000+ Hour Life
• 316 Stainless Steel Housing (Polished)
• Only a 3/16” Hole Required for Power Wire (Surface Mounted Light)
• Lifetime Warranty 
• Underwater Use Only 

 FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 500,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 50,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 50,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

 FEATURES

• Stainless Steel Housing - No Rust
• Rated for 15A
• 22mm (7/8") Diameter Button - Easier to Push Compared to 19mm
• 25mm (1") Outside Diameter
• LED Backlit Ring in your Choice of Colors
• IP67 Rated - Waterproof
• Silky Smooth Movement
• Rated for 500,000 Cycles
• Removable Clip for Wiring Harness
• 3ft of 14AWG Copper Tinned Wiring for a Simple Installation
• Fits a 7/8" Hole
• Plash Lifetime Warranty

WIRING

• BLACK wire = Ground  (for LED in Switch)
• ORANGE wire = Positive (for LED in Switch)
• BLUE wire = Normally Closed input
• YELLOW wire = Normally Closed output
• RED wire = Normally Open input
• BROWN wire = Normally Open output 

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Dual Output Switch - Can Control 2 Electronics at Once. (ex: Navigation Lights + Anchor Light)
• Input Voltage: 9~15V
• Solid State Circuitry Rated for 20A
• Black Hardcoat Anodized 316 Stainless Steel Housing = No More Fading
• 19mm (3/4") Diameter Button
• Tri Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position ( Powering Navigation & Anchor Lights )
• LED is Green when in the ON position ( Powering Anchor Lights & Turning OFF Navigation Lights )
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Lifespan of 500,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Momentary Operation Only
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 3/4" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

HOW IT WORKS:
Power on but switch not pressed has a Blue illuminated LED ring.  First press turns on the Circuit #1 (white wire) & Circuit #2 (Blue wire) =  LED ring turns RED.  Second press leaves Circuit #2 (Blue wire) on and turns off Circuit #1 (White wire) = LED ring turns GREEN.  Third press turns all Circuits off = LED ring turns back to BLUE.

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Dual Output Switch - Can Control 2 Electronics at Once. (ex: Navigation Lights + Anchor Light)
• Input Voltage: 9~15V
• Solid State Circuitry Rated for 20A
• 316 Stainless Steel Housing = No More Fading
• 19mm (3/4") Diameter Button
• Tri Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position ( Powering Navigation & Anchor Lights )
• LED is Green when in the ON position ( Powering Anchor Lights & Turning OFF Navigation Lights )
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Lifespan of 500,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Momentary Operation Only
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 3/4" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

HOW IT WORKS:
Power on but switch not pressed has a Blue illuminated LED ring.  First press turns on the Circuit #1 (white wire) & Circuit #2 (Blue wire) =  LED ring turns RED.  Second press leaves Circuit #2 (Blue wire) on and turns off Circuit #1 (White wire) = LED ring turns GREEN.  Third press turns all Circuits off = LED ring turns back to BLUE.

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Dual Output Switch - Can Control 2 Electronics at Once. (ex: Navigation Lights + Anchor Light)
• Input Voltage: 9~15V
• Solid State Circuitry Rated for 20A
• Black Hardcoat Anodized 316 Stainless Steel Housing = No More Fading
• 22mm (7/8") Diameter Button
• Tri Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position ( Powering Navigation & Anchor Lights )
• LED is Green when in the ON position ( Powering Anchor Lights & Turning OFF Navigation Lights )
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Lifespan of 500,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Momentary Operation Only
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 7/8" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

HOW IT WORKS:
Power on but switch not pressed has a Blue illuminated LED ring.  First press turns on the Circuit #1 (white wire) & Circuit #2 (Blue wire) =  LED ring turns RED.  Second press leaves Circuit #2 (Blue wire) on and turns off Circuit #1 (White wire) = LED ring turns GREEN.  Third press turns all Circuits off = LED ring turns back to BLUE.

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Dual Output Switch - Can Control 2 Electronics at Once. (ex: Navigation Lights + Anchor Light)
• Input Voltage: 9~15V
• Solid State Circuitry Rated for 20A
• 316 Stainless Steel Housing = No More Fading
• 22mm (7/8") Diameter Button
• Tri Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position ( Powering Navigation & Anchor Lights )
• LED is Green when in the ON position ( Powering Anchor Lights & Turning OFF Navigation Lights )
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Lifespan of 500,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Momentary Operation Only
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 7/8" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

HOW IT WORKS:
Power on but switch not pressed has a Blue illuminated LED ring.  First press turns on the Circuit #1 (white wire) & Circuit #2 (Blue wire) =  LED ring turns RED.  Second press leaves Circuit #2 (Blue wire) on and turns off Circuit #1 (White wire) = LED ring turns GREEN.  Third press turns all Circuits off = LED ring turns back to BLUE.

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended in the harsh salt water environment. No corners cut here. Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Input Voltage: 9~15V
• Robust Mechanical Switch Rated for 20A
• Black Hardcoat Anodized 316 Stainless Steel Housing = No More Fading
• 19mm (3/4") Diameter Button
• Dual Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Mechanical Lifespan of +150,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Latching or Momentary Operation
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 3/4" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Input Voltage: 9~15V
• Robust Mechanical Switch Rated for 20A
• 316 Stainless Steel Housing = No Rust
• 19mm (3/4") Diameter Button
• Dual Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Mechanical Lifespan of +1 Million Impressions 
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Latching or Momentary Operation
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 3/4" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Input Voltage: 9~15V
• Robust Mechanical Switch Rated for 20A
• Black Hardcoat Anodized 316 Stainless Steel Housing = No More Fading
• 22mm (7/8") Diameter Button
• Dual Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Mechanical Lifespan of 150,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Latching or Momentary Operation
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 7/8" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

The marine world asked for it and here it is!  The revolutionary REVERT Switches.  Made to last the lifespan of the boat and keep your electronics functioning as intended. No corners cut here.  Nothing but the best components, material, and processes used for the bad boys.

FEATURES:

• Input Voltage: 9~15V
• Robust Mechanical Switch Rated for 20A
• 316 Stainless Steel Housing = No Rust
• 22mm (7/8") Diameter Button
• Dual Color LED Backlit Ring  
• LED is Blue when in the OFF Position
• LED is Red when in the ON Position
• The LED Lifespan is +40,000 Hours
• IP68 Rated Waterproof - Fully Potted
• Mechanical Lifespan of 150,000 Impressions
• 8.6g Vibration Compliant
• Salt Spray Tested & UV Resistant
• Available in Latching or Momentary Operation
• 3ft of 14 AWG Copper Tinned Wiring for a Simple Installation
• Panel Mounting Thickness: <0."1 ~ 1.85" (1mm ~ 47mm)
• Requires a 7/8" Wide Round Hole for Mounting
• REVERT Limited Lifetime Warranty

The Best Light Bar for Center Console Boats. Specifically made to project the light on the horizon and not on the bow of your boat.  There is a crisp cut off line where no light shines down from the bottom of the light bar.  Efficiency is the key here.  The light is where you need it and not where you don't. Isolated Dissimilar Metals. Amazing Beam Pattern with Minimum Reflection on Bow. Pressed Fit Assembly = Less Fasteners. Extended Power Wire for Easy Installation. 

FEATURES

• Optimal Beam Pattern to Reduce Bow Reflection
• Integrated Temperature Control System (TCS)
• 3,780-22,680 Lumens 
• 9-54 X 5W OSRAM CSHP LEDS
• 45W-270w MAX 
• 3.5-19.2A @ 12V DC  /  1.7-10.1A @ 24V DC
• 9~32V DC Input
• IP67 Rated
• High Lux - High Output
• Durable Scratch Resistant High Impact Polycarbonate Lens 
• 6000K (Cool White) 
• 9FT Power Wire
• New Design to Improve Aerodynamics (Noise Reducers are Not Required)
• Chrome Coated Stainless Hardware to Eliminate Dissimilar Metal 
• Max Distance 2,372 FT
• Blacked Out Design 
• Extruded 6063 Aluminum Body 
• 50,000 Hours or 5 Years of Continuous Use
• Over / Under and Reverse Polarity Protection
• VHF and AIS Safe 
• Protected Against Electromagnetic (EMC) & Radio Frequency Interference (RFI)
• Operating Temp: -40°F- +145°F
• MIL 810-STD 8.6G Vibration Compliant 

• (1) 316 Stainless Steel bracket
• hardware: 2 x fasteners with nylon locking nuts
• fits all of our cubes (12W, 20W, 30W, & 40W)
• *does not fit 60W side shooting cubes*