Plash Marine Lighting

Plash Forged Carbon Fiber Pipe Mounted LED T-Top Light is designed to properly fit around the pipe above your head on a boat t-top horizontal bar.  And forget about corrosion with the forged carbon fiber housing. The color options are endless. For fading, dimming or flashing an external dimmer or RGBW controller is required (sold separately).

• Molded To Properly Fit Around The Pipe (1" IPS / 1.31OD)
• Forged Carbon Fiber Housing
• 12V DC Input
• Low Profile
• Available in a Black or White Finish
• Multiple Color Options Including The White (RGBW)
• Ability to Wire to a Single Color, Dual Color, or RGBW with controller (sold separately)
• Milky White Lens for a Wide Viewing Angle
• IP67 Rated for Exterior Applications
• Wide 140 Degree Beam Pattern To Eliminate Dark Spots
• Fully Dimmable With Controller (Sold Separately)
• 316 Stainless Steel Mounting Hardware
• Switch not Included
• 12FT Power Wire To Easily Reach Your Console
• 5 Wire - Black(V+) / Red, Green, Blue, White (All Grounds)
• Power Wire Exits From Behind so Drilling Into the Pipe is Required
• MADE IN USA

Specifications:

• Input Voltage: 12V
• LED Color: RGBW
• Housing: Black or White 
• Max Amp Draw: 1.6A @ 12.9V
• Lumens: 1,952LM (on White)
• Color Temperature (White): 6000K

Color changing marine RGB down light with a beautiful glass lens that adds a colorful ambiance to any deck or room.

• Frosted White Glass Trim
• 12V~24V DC Input Voltage
• 360° Visibility
• Aluminum Housing
• Spring Loaded Tabs for Easy Installation
• 10W / 18 PCS of 5050 RGB Led's
• Wide 120° Beam Angle
• Glass Lens Deflects Light Outwards Creating a Unique Glow
• IP67 Rated
• 3ft of Black Insulated Power Wire
• RGB Controller Sold Separately**

PlashLights waterproof Bluetooth controller is operated via a mobile phone app to turn on/off,  adjust the brightness or color, adjust color temperature, and change preset color patterns. There are a variety of lighting patterns to choose from.

The operation is very simple with mobile phone control (IOS or Android).  Your phone is not needed when a switch is installed as the lights will defer to the last setting when powered on (Example:  If you have them on a blue stobe pattern and turn the power of at a switch or the Perko, when power is applied at a later date the lights will be on blue strobe).  Basically, your phone is only required to change the color or patterns.

• Requires download of PlashLights APP (FREE)
• Simple to mount with a tab on each side
• IP67 Rated Enclosure = Waterproof
• Easily control and synchronize up to 240 Watts of lighting
• 15A when RGB used (5A/per channel)  
• 20A when RGB+W used (5A/per RGB channel & 5A white)
• Compatibility: bluetooth 4.0 (bluetooth phones of 4.0 or above)
• Supports mobile phone system: IOS 6.0 android 4.3 or above
• Operating  Voltage: 12~24V DC
• Software language: English
• Control distance: 65 feet 
• Size: 3-13/16" long x 1-1/4" tall x 1-15/16" wide
• Working temperature: - 4°F to 145°F

For an easy installation a wiring harness is a Must.  This harness will save you time and money during installation.  Comes with 12VDC relay, battery terminal connections, in line fuse, red illuminated rocker switch (requires a 3/4" hole to be flush mounted), and 23 ft. of wire (from the relay: 9ft to each light (2 strands), 4ft to switch, 1ft to battery).  Ideal for ATVs, UTVs, & Autos.  For marine application it is generally best to have a custom one built.

• Illuminated Round Waterproof Switch
• Rated Up to 100 Watts Per Output
• Includes 40A Relay and Fuse
• 25 ft in Length Total (2 strands 9 ft from Relay to Light, 9 ft to Switch, and 16 in to Battery
• Rugged Black Insulated Power Wire
  
• For Connecting Two (2) X2 Cubes Lights or (2) 6" Single Row Flush Mount Lights

X2-Series LED Black Housing 12" Light Bar!    The Best Light Bar for Center Console Boats! Isolated Dissimilar Metals. Amazing Beam Pattern with Minimum Reflection on Bow. Pressed Fit Assembly = Less Fasteners. Extended Power Wire for Easy Installation. 

FEATURES

• Optimal Beam Pattern to Reduce Bow Reflection
• Integrated Temperature Control System (TCS)
• Combination Beam Pattern 
• 10,080-42,000 Lumens 
• 24-100 X 5W OSRAM CSHP LEDS
• 4.3A-21.5A @ 12V DC  /  2.2A-10.75A @ 24V DC
• 9~32V DC Input
• IP67 Rated
• High Lux - High Output
• 120W-300W MAX (@ 32V)
  
• Durable Scratch Resistant High Impact Polycarbonate Lens 
• 9FT Power Wire
• 6000K (Cool White) 
• New Design to Improve Aerodynamics (Noise Reducers are Not Required)
• Chrome Coated Stainless Hardware to Eliminate Dissimilar Metal 
• Max Distance 3,973FT
• Blacked Out Design 
• Extruded 6063 Aluminum Body 
• 50,000 Hours or 5 Years of Continuous Use
• Over / Under and Reverse Polarity Protection
• VHF and AIS Safe 
• Protected Against Electromagnetic (EMC) & Radio Frequency Interference (RFI)
• Operating Temp: -40°F- +145°F
• MIL810-STD 8.6G Vibration Compliant 

INCLUDES

• (2) Chrome Coated Mounting Brackets
• Chrome Coated Stainless Steel Hardware
• Copper Tinned Marine Grade Extended Power Wire - 9ft 

Long LED Light bars can resonate in the wind. If you are experiencing a lot of wind noise from your large LED Light bars, it could be from the cooling fin resonance (vibration) from the wind. These isolators snap in between the cooling fins to stop the vibrating resonance noise. We recommend 1 every 10" or so. Made from non-hardening rubber. Made to fit our XX-Series, MX-Series, CX-Series light bars, but also fits Rigid Industries light bars. These are a perfect fit with no modifications required. Eliminates Whistle, Harmonics, Noise, Rattles etc. about 90%. ***Sold Individually*** Warning! They fit very tight, so you will have to wrestle them in a bit, but hey, you're no sissy! You can take 'em!