Hardin Marine

Dominator Holley 4500 Base Gasket

Double Groove V-Belt Alternator Pulley for use on alternators with round pulley shaft. 2-5/8" OD. Fits a .670" Round Shaft.

Dowel Keyway For Multi-Stage Sea Pump Mandrel.

• Constructed of Polished 316L Stainless Steel.
• 3/4" NPT Female Thread
• Outer Diameter 1-1/4"
• Overall Length 3-7/8"
• Overall Width 5-1/4"
• Perfect for intercooler, tailpipe, and even engine water discharge. 

Replacement Dual filter basket used on Swirl-A-Way Sea Strainers set up for dual filter baskets. Supercedes older stlye 620-913211 basket. For 10 inch Sea Strainers 620-913205 and 620-913206.

• 3" Wide x 3-1/2" Tall.
• Available with Red, White, Translucent or Black Switches.
• Panels available in Red, Blue, Purple, Black or Silver Carbon Fiber.
• REAL Carbon Fiber, not printed on.

• 3" Wide x 3-1/2" Tall. 
• Red, White, Translucent or Black, single or double pole Switches available separately. 
• Panels available in Red, Blue, Purple, Black or Silver Carbon Fiber. 
• REAL Carbon Fiber, not printed on.

Dual Carburetor Inline Linkage Kit

This kit comes with bushings for Holley linkage heim joints, hex bar, bolts and nuts. Center to center is 12". Right hand thread can be trimmed to fit.

• Ultimate in a clean and functional installation.
• Designed for MSD 6M2L or New 6M3L Ignition Boxes
  
• Will mount on a dual cooler bellhousing.
• Will also mount round coils or MSD Blaster SS coils.
• Satin Finish, paint, coat or polish to suit your build.

Dual Cooler Flywheel Housing Kits - Dual Cooler Flywheel Housing (Bellhousing Only, No Cooler Kits)

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthening ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance. Kits include a dual cooler flywheel housing, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware. Oil plumbing sold separately.

Note: This bellhousing fits Chevrolet engines only. To be used with the Top Mount Starter #620-10060

For Replacement Parts, Click here.

Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with 13 Plate Port Cooler and 8 Plate Starboard Cooler

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthing ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.  Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.  Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10060

Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with 15 Plate Port Cooler and 8 Plate Starboard Cooler

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthing ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.  Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.  Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10058

Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with Dual 13 Plate Coolers

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthing ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.  Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.  Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10058

Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with Dual 8 Plate Coolers

This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further.  Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer.  The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated.  Torsional strengthing ribs have been added for unmatched strength and durability.  This is a common failure point in a factory style bellhousing on high horsepower applications.  Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options.  The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance.  Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.  Oil plumbing sold separately.

Note: To be used with the Top Mount Starter #620-10060

Dual Cylinder Power Assist Helm Unit

• 120cc
  
• FLOW RATE 1 1/2 TO 3 1/2 GPM
• MAX PRESSURE 2500 PSI
  
• OPEN CENTER NON LOAD REACTION
• 3/4" O-RING PORTS

Dual Cylinder Steering Hose Kit

• Two 22" Inside Hoses
• Two 63" Inside Hoses
• Two 1/4 NPTX-6 JIC Tee Fittings
• Two 1/4 NPTX-6 JIC 90 Degree Fittings

• CNC machined from 6061-T6 billet aluminum
• These units fit all popular B/B GM type engines.
• Inlet hose barb fittings are available separately.
• Dual side entry 1" NPT inlets.
• O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
• Polished to a mirror finish or can be custom color finished by the customer.
• Inlet hose barb fitting sold separately. 

• CNC machined from 6061-T6 billet aluminum.
• Eliminates the need for any additional power steering brackets.
• These units fit all popular B/B GM type engines.
• Features power steering mounting ears to be used in conjunction with the Hardin Marine crossover mounted power steering pump.
• Inlet hose barb fittings are available separately.
• Dual 1" NPT inlets.
• Includes mounting bolts.
• O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
• Polished to a mirror finish or can be custom color finished by the customer.

1-1/4" Common Inlet Blocks - Dual Stage Inlet for use 3 Stage Rear Entry Sea Pumps

Dual Stage Shaft for Hardin Marine Gen 5/6 Multi Stage Sea Pumps

Dual Stage Shaft for Hardin Marine Multi Stage Sea Pumps

Dual Trim Switch Bracket For Isotta Carlotta Steering Wheel

This bracket will mount to an Isotta Carlotta steering wheel and allow the attachment of two Bluetooth Trim Switch.

Dual Trim Switch Bracket For Most 6-Bolt Momo Pattern Steering Wheels

This bracket will mount to most 6-Bolt Momo pattern Steering Wheels and allow the attachment of two Bluetooth Trim Switches. Bracket position is adjustable, and can be flipped one way or the other for best fit. Works best on steering wheels with equidistant spokes.

• Panel is Powdercoated Billet Aluminum
• Two Rocker Switches Mom On / Off / Mom On
• Measures 3" Wide x 3" Tall, Depth is 1/4"