655-4064 Standard Marine Seal Complete Combination Gasket Kit - Ford 460- Sold in Pairs
For those of you that require
all of the gaskets required for an engine rebuild we offer these
convenient combination kits. You'll receive intake manifold gaskets,
exhaust manifold gaskets, valve cover gaskets, cylinder head gaskets, oil
pan gaskets, and a front timing cover or water pump cover gasket (seal
sold separately). These gaskets give the peace of mind you did the
job right. Choose from the standard Marine Seal or the Best Xtreme
Marine Seal.
Sold in Pairs
|
|
655-208 Standard Marine Seal Intake Gasket -Ford 460 V8- Sold in Pairs These hi-performance intake manifold gasket sets are manufactured using the latest in synthetic fiber nitrile materials. This material is designed without any metal core allowing engine builders the option of port trimming for modified ports. These gaskets resist oil, gasoline, and even alcohol. - Exceeds original equipment specifications
- Perfect for bi-metal applications (aluminum intake / cast iron blocks)
- Port Size is 2.50" Tall by 2.20" Wide
Sold in Pairs
|
|
655-101 Standard Marine Seal Intake Gasket - Small Block Chevy V8 350 Non-Vortec- Sold in Pairs
These hi-performance intake manifold gasket sets are manufactured using the
latest in synthetic fiber nitrile materials. This material is designed
without any metal core allowing engine builders the option of port trimming for
modified ports. These gaskets resist oil, gasoline, and even
alcohol. A silicone sealing bead has been added to our Xtreme Marine Seal
Gaskets for an additional sealing bead around ports where it's needed most on
modified engines.
- Exceeds original equipment specifications
- Perfect for bi-metal applications (aluminum intake / cast iron blocks)
Sold in Pairs
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Standard" Naturally Aspirated or Supercharged Engine V-Belt Accessory Drive Kit
For years one of the most aggravating chores of engine assembly has been thedifficulty of obtaining bracketry and accessories to final dress anengine. Until now the industry has offered only crude OEM stamped steelbracketry with limited adjustability requiring modifications to make them fit innearly all applications. These problems brought to our attention the needto design bracketry to mount engine accessories that are not only attractive butstrong with a quality fit every time. We have compiled our most popularcomponents into kits. Both naturally aspirated and supercharged versionsare available. Our "Standard" version combines quality and costefficiency while our "Deluxe" versions represent the very best inavailable bracketry and accessories available today. Each kit includes allnecessary hardware.
Note: Supercharged version does NOT include a supercharger pulley asit is included with the purchase of your supercharger.
|
|
620-70149 Standard Push-In Valve Cover Grommet These oil resistant rubber grommets are used to seal breathers and caps in all popular valve covers. 1-1/4" hole, for 1" breathers. Cut breather hole to preference. Can also be used as a breather hole plug.
|
|
625-4203 This rebuild kit is designed for use with the 625-4102, 625-4132, 625-4131 & 625-4101.
Not for use on Stock pumps!
Standard Rebuild Kit for Gen 7 Sea Pump, Mercury 350, 496 and 502 Mag
Rebuild a 625-4101, 625-4102, 625-4131 and 625-4132 Stainless Steel Sea Pumps with this kit. This standard kit includes the wear plates, o-ring, impeller and gasket.
|
|
625-4123 Not for use on Stock pumps Gen 8 Sea pumps with Gen 2 Rear Cover!
Standard Rebuild Kit for Gen 8 Sea Pump, Gen 1 Rear Cover
Rebuild a 625-4132 Stainless Steel Sea Pump with this kit. This deluxe kit includes wear plates, o-ring, impeller
|
|
625-4125 Not for use on Stock pumps Gen 8 Sea pumps with Gen 1 Rear Cover!
Standard Rebuild Kit for Gen 8 Sea Pump, Gen 2 Rear Cover
Rebuild a 625-4132 Stainless Steel Sea Pump with this kit. This deluxe kit includes wear plates, o-ring, impeller
|
|
620-286550
Standard Rebuild Kit for Hardin Exhaust Diverters
This kit is used to replace worn out components on your Hardin Marine Diverter kit. The basing kit includes replacement O-Rings and bolts/nuts:
- (4) O-Rings
- (6) 10-32 x 5/8" Bolts
- (6) 10-32 Nylock Nuts
|
|
620-08816 Start Solenoid Kit
Note: Uses 14 AWG wire
|
|
620-337ML Counter Clockwise Rotation
For Ford 302 & 351 CID engines. 2 bolt mount. 12Volt Nose extends 2-3/8"
into flywheel.
|
|
620-337M Clockwise Rotation
For Ford 302 & 351 CID engines. 2 bolt mount. 12Volt Nose extends 2-3/8"
into flywheel.
|
|
620-10058S Shim, Starter, .080 Thick. Supercedes 620-3125S
Fits:
|
|
420-910331 Steam Fitting, Gil/Hardin Manifold
Replacement fitting.
|
|
755-8603 External Balance Steel Flywheel Gen 4,5 & 6 B/B Chevy (Top/Bellhousing Mount Starter)
These all new steel flywheels are manufactured from certified billet material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.
Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past. Giving you the edge you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- 168 tooth gear
- Weight: 28 lbs.
|
|
755-8614 Steel Flywheel - External Balance For Gen 4, 5 & 6 Big Block Chevy 454 CID (Bottom Mount Starter)
These all new steel flywheels will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift
and movement a thing of the past. Giving you the edge you’re looking for.
- Steel construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- 168 tooth gear
- Weight: 32 lbs
|
|
755-8615 Steel Flywheel - External Balance For Gen 5 and 6 Big Block Chevy 502 CID (Bottom Mount Starter)
These all new steel flywheels are manufactured from certified billet
material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift
and movement a thing of the past. Giving you the edge you’re looking for.
- Steel construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- 168 tooth gear
- Weight: 32 lbs
|
|
755-8613 Steel Flywheel - Internal Balance For Gen 4, 5 and 6 Big Block Chevy (Bottom Mount Starter)
These all new steel flywheels are manufactured from certified billet material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.
Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past. Giving you the edge you’re looking for.
- Steel construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- 168 tooth gear
- Weight: 32 lbs
|
|
755-8602
Internal Balance Steel Flywheel Gen 4,5 & 6 B/B Chevy (Top/Bellhousing Mounted Starter)
These all new steel flywheels are manufactured from certified material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.
Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past.
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 28 lbs.
|
|
755-8649
Internal Balance Steel Flywheel LS 1, 2, 3, 6, 7 Chevy (Top/Bellhousing Mounted Starter)
These all new steel flywheels are manufactured from certified material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.
Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past.
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 28 lbs.
|
|
755-8652 Internal Balance Steel Flywheel LSA/LSX Chevy (Bottom Mounted Starter)
These all new steel flywheels are manufactured from certified
material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past.
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Zero/neutral balance • 168 tooth gear
- 32 lbs.
|
|
620-370983 Steering Cable Adapter
Hardin Marine to Teleflex® Big T™, Safe-T™, and 290 NFS Helm to 2900 Cable
|
|
620-60358 Stiletto Jet Boat Conversion Upgrade
The Stiletto control can be modified to use 43C / 43BC series cables that are common in jet boats. This kit should be purchased along side a new (620-6035) Hardin Marine Billet Stiletto Control. Contact tech support if you already have a Stiletto control you wish to modify.
|
|
420-910310 Stock Mercury Inlet Tee
3/4" NPT, 2 x 1" Slip-On Hose
|
|
410-280190 Straight Cut Exhaust Clamp on Flap, Stainless Steel
If you one of the thousands of people frustrated that Your beautiful boat's gleaming exhaust tips are finished off with an ugly rubber Salisbury flap then we finally have your answer. These new 316L stainless steel clamp on external flaps slide on to and clamp to a 4" stainless exhaust tip. They are not only do the job their designed for but they will do it in style. 1" of exposed exhaust pipe is required for mounting. Sold in pairs.
Overall length is 2-1/8" and the clamping surface required is 1"
|
|
615-500-0350 Strut Bushing, Barracuda 7/8 x 1-3/8
- Available: (1) One
- Condition: New
|
|
620-32436
- For Log Manifold O2 spacer 620-32435
- Includes 4 studs, 4 washers, and 4 nuts, all 5/16"
|
|
