125-5730 + Option(s) Transom Cover Plates
Transom cover plates are for use when the exhaust ports (tips) are removed to install over the transom style exhaust. The plates cover the holes left in the transom. These plates are machined from 6061-T6 billet aluminum - they are not inexpensive castings. The outside plates are 5-1/2" in diameter to cover the largest exhaust ports. The inner plates are 4-1/2" in diameter. The outside plate is threaded on the back side. To install, you merely sandwich the transom of the boat between the plates. No fiberglass work, no hassle. If you ever decide to change your exhaust back, just remove the plates and your ready!
Sold as a kit to cover 2 exhaust holes. Due to varying transom thicknesses the covers do NOT come with mounting bolt. Requires 5/16" bolt long enough to go through transom and internal mounting plate.
|
|
410-1084-12 - -12 AN Male Fitting
- 316L Stainless Steel Bracket Style.
- Allows for easy install and plumbing.
- Race Proven!
|
|
620-370610 Transom Mount Steering Connection
|
|
137-8043 + Option(s) Transom Plate for Mayfair Trim Tabs (2) required per kit. These replace Gen 1 and Gen 2 Transom Plates. They do not have the LED light provision or Sender provision that is present on new style Gen 3 plates. Casting #PEI3001.
Also replaces Mercury OEM #846193A1 and #846191A1.
|
|
137-8123 + Option(s) Transom Plate for Mayfair Gen 3 Trim Tabs (2) required per kit. These are Gen 3 style transom plates with provision for sender and LED light. Casting #PEI3001.
Also replaces Mercury OEM #846193A1 and #846191A1.
|
|
525-23-845133 Spacer used on Mercury Trim Ram Actuators. Replaces OEM #23-845133
|
|
525-24-845143 Trim Actuator / Indicator Spring used on Mercury Trim Ram Actuators. Replaces OEM #23-845143
|
|
137-8275 Trim Pump Reservoir - "Early" Model Single Bolt Style
We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price.
5-1/2" Length x 5-5/8" Width x 3-5/8" Height
|
|
137-8225 Trim Pump Reservoir - "Late" Model Four (4) Bolt Style - Left Hand Inlet
We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price. 5-1/2" Length x 5-5/8" Width x 3-5/8" Height
|
|
137-8272 Trim Pump Reservoir - "Late" Model Four (4) Bolt Style - Right Hand Inlet
Replaces: Mercruiser 88316A1
We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price. 5-1/2" Length x 5-5/8" Width x 3-5/8" Height
|
|
625-1239 Trim Pump Reservoir O-Ring
O-Ring replacement for Trim Pump Reservoirs 137-8272
|
|
137-8498 Trim Pump Reservoir O-Ring
O-Ring for Steel Trim Pump Reservoirs 137-8273
|
|
137-8266 Trim Ram Hose for Mayfair Trim Tabs (4) required per kit. 11 Inches long.
Also replaces Mercury OEM #32-845975. (Sold Each)
|
|
137-8666 Trim Ram Sensor Hose for Mayfair Trim Tabs . (Sold Each)
|
|
137-8133 Trim Ram Spacer - Gen 2 Mayfair Trim Tabs (2) required per kit. Sold Each.
|
|
137-8060 Trim Ram To Pins Bushing for Mayfair Trim Tabs (2) required per kit. Sold Each.
|
|
137-8057 Trim Ram with Actuator Pin for Mayfair Trim Tabs (2) required per kit.
Also replaces Mercury OEM #847197
|
|
137-8689 Trim Sender Conversion Kit for #6 Drive, With Hinge Pin
|
|
|
|
|
137-8059 Trim Tab Cable End for Mayfair Trim Tabs (2) required per kit.
Also replaces Mercury OEM #845154
|
|
137-8058 Trim Tab Hinge Pin for Mayfair Trim Tabs (2) required per kit. Also replaces Mercury OEM #847195
|
|
137-8135 Trim Tab Hinge Pin with Actuator provision, for Gen 2 Mayfair Trim Tabs (2) required per kit.
|
|
137-8055 This kit includes one #12 trim tab pin, and two #5 nuts.
|
|
137-8414 Trim Tab Sensor for Mayfair Trim Tabs.
|
|
137-8417 Trim Tab Sensor Fitting for Mayfair Trim Tabs.
|
|
137-8410 Trim Tab Sensor Kit for Gen I Mayfair Trim Tabs. Includes sensor, Sensor hose, fitting and bolts. Only Fits Gen I tabs!
|
|
137-8070 Trim Tab Zinc for Mayfair Trim Tabs (4) required per kit.
Also replaces Mercury OEM #847332 and #847266
|
|
