462-379-00BBV150LP Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle. Pipe: 1-1/2" IPS
|
|
462-9-0528DPGCHR "Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513."
Type: Gas, Finish: Chrome, Pipe: 1-1/2", Flange: 3-5/8"
Sold: Each
|
|
462-9-0493008PLB Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hingled lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size. Pipe: 1-1/2", Size: 11-1/2" H x 7-1/4" W, Cylinder: 6" x 8", Ratio: 17:1 Cast bronze. Designed for easy installation and cleaning. Features mounting lugs cast into both sides to assure universal mounting, four outside tie rods and a 316 stainless steel strainer basket to minimize electrolysis. Hingled lugs for cast bronze cover permit easy removal and cleaning of basket. Drain plug in bottom casting is provided for easy removal of sediment and draining for winterization. Ratio given for open area to pipe size.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-STH150W Includes locking nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 1 1/2", A: 3.15", B: 1.30", C: 4.38", D: 3.50" Includes locking nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-37-7710710 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 1-1/2" IPS, Case: 2 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
780-1055
- 1-1/2" Slip-On
- Outer Diameter 2.68"
- Overall Length 3.8"
- Polished Stainless Steel.
- Stainless Steel main body and flange.
|
|
780-1025
- 1-1/2" Slip-On
- Outer Diameter 3.0"
- Overall Length 2.70"
- Polished Stainless Steel.
- Stainless Steel main body and flange.
|
|
462-34-ARG1500SBSPP Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 1 1/2" NPT, Basket: Stainless, A: 11.4", B: 7.3", C: 7.8", D: 2.5" Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-TH150W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 1 1/2", A: 3.15", B: 0.30", C: 2.89" Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-108-901048 1-1/2" To 1-1/4" Male Reducer Model: MTC 24-20, Description: 1-1/2" Male to 1-1/4" Male
|
|
462-9-0528DP8CHR "Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513."
Type: Unmarked, Finish: Chrome , Pipe: 1-1/2", Flange: 3-5/8"
Sold: Each
|
|
462-9-0528DPWCHR "Cast bronze, chrome plated. Comes complete with key, O-ring and retaining cable on cap. The 1-1/4" caps have a slot between holes. Screw size is 8. Use spare key series 1248 and spare O-ring series 513."
Type: Water , Finish: Chrome, Pipe: 1-1/2", Flange: 3-5/8"
Sold: Each
|
|
462-23-6342SS7 These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life. For 12-VDC systems. Size: 1-1/2", Bezel: Stainless Steel, LED Color: White, Volts: 12 These LED lights exceed the output of comparable halogen lights while using 20% of the power. Lights stay cool to the touch and eliminate the burn hazard that halogen lighting can present. Fully potted electronics and stainless steel housing allow for interior and exterior mounting - even underwater! Rated for 50,000+ hours of life.
|
|
780-305
- 1-1/2" hose fitting.
- Prefect for bilge pump discharge fitting.
- Includes Nut.
|
|
462-88-1461120 Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. ID: 1-1/2", Length: 100' Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.
|
|
462-88-1461126 Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. ID: 1-1/2", Length: 50' Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.
|
|
462-606-1401126 Features extra odor-resistant sanitation hose for all head and holding tank connections smooth light grey hose, hard PVC helix gives good flexibilty and bend radius. NOT for potable water applications, or for exposure to alcohol, petrochemicals or solvents. Maximum operating temps (+10° to140°F). Maximum working pressure 70 psi. 3 Year warranty. ID: 1-1/2", Length: 50', Bend: 9", VAC: 28
|
|
462-6-454901000 Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water. Hose: 1-1/2" Designed for installation in waste discharge and bilge pumpout systems. Allows waste to be pumped directly into holding tank or diverted to an overboard discharge fitting. Empty two separate bilge sections with a single pump. All ABS and stainless steel construction. Withstands corrosive waste chemicals and bilge water.
|
|
462-698-DV5606 Allows one pump to draw from two locations. Precision machined eliminating seepage and odor problems. PTFE lubricated non-stick operation. Complies with USCG rules for Type 3 waste systems. Enables flexibility of pump installations. Smooth lever operation. Hose: 1-1/2"
|
|
462-38-44450 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1-1/2" x 1-1/4"
|
|
