462-6-186600121 "This bronze body, self-priming impeller pump will produce a dry prime suction lift of about 4' and has a maximum head of 20'. Use for bilge pumping, livewell circulation, washdown, and general pumping applications. Cannot be run dry. Permanent magnet type motor is fully enclosed with a stainless steel shaft and complies with USCG Electrical Standards 183.410 and ISO 8846 marine for ignition protection on gasoline powered vessels. If the water contains a significant amount of oil use oil resistant nitrile impeller #6303-0003. Ports: 1/2" internal pipe threads, 1" external hose barb & 3/4" external garden hose adapter. NOT TO BE USED IN POTABLE WATER SYSTEMS." GPM: 6.3, Volts: 12, Amps: 8 Sold: Each
|
|
462-661-8053 Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels. Positions: 6, Type: Vertical, Size: 5-1/4" W x 7-1/2" H
|
|
462-661-8054 Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels. Positions: 3, Type: Vertical, Size: 5-1/4" W x 3-3/4" H
|
|
462-661-8261 Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels. Positions: 8, Type: Horizontal, Size: 9-3/8" W x 3-3/4" H
|
|
462-661-8262 Features include waterproof panel mount fuse holders which accept commonly available AGC and MDL fuses. Made of heavy 1/8" aluminum. Waterproof contura switches and "On" indicating LED's embedded in switch. Completely wired and ready to install. Comes with a set of 30 common DC labels. Positions: 4, Type: Horizontal, Size: 5-1/4" W x 3-3/4" H
|
|
462-47-2727 Water Shutter Exhaust 60930 Replaces: 60930 Sold: Each
|
|
462-100-932223 "Enables the boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Includes all the fittings needed to attach hoses to a water or holding tank. Includes: 1/2" 90° hose barbs(2), 1-1/2" 90° hose barb(1) and thread sealant tape." Description: 90° Pipe to Hose Kit Sold: Bag
|
|
462-100-932222 "Enables the boatman to plug existing threaded fitting opening and to position new openings for fittings anywhere on tank. Comes with instructions. Includes all the fittings needed to attach hoses to a water or holding tank. Includes: 1/2" hose barbs(2), 1-1/2" hose barb(1) and thread sealant tape." Description: Straight Pipe to Hose Kit Sold: Bag
|
|
730-GWT200I 1/4" Water Temp Sender Isolated Ground.
|
|
462-678-90406 American Dual Standard Thread: 1/8" NPTF", Temp.: 240° F Sold: Each
|
|
462-88-1300126 Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F. ID: 1/2", OD: 3/4", Length: 50', Working Pressure: 62 psi
|
|
462-88-1300346 Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F. ID: 3/4", OD: 1", Length: 50', Working Pressure: 50 psi
|
|
462-88-1300586 Use for engine heater, heat exchanger, and A/C circulation applications. Also good for sink, icebox, shower and livewell drain lines and heavy duty toilet intake hose. EPDM tube and cover, fabric reinforced. Resistant to: mild chemicals, heat, cold, ozone, saltwater. Temperature range: -40°F to +190°F. ID: 5/8", OD: 7/8", Length: 50', Working Pressure: 62 psi
|
|
462-100-851533WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 55, Size: 54-1/2" L x 13" W x 20" H" Sold: Each
|
|
462-100-851626WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 13, Size: 24" L x 10" W x 14" H" Sold: Each
|
|
462-100-941627WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 15, Size: 25" L x 11" W x 15" H" Sold: Each
|
|
462-100-851666WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 20, Size: 30" L x 16" W x 10" H" Sold: Each
|
|
462-100-851532WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 25, Size: 37" L x 17-1/2" W x 10" H" Sold: Each
|
|
462-100-851525WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 35, Size: 36" L x 15-1/2" W x 16" H" Sold: Each
|
|
462-100-851859WH Todd's one piece molded water/holding tanks are tough and durable. Each tank fully complies with FDA regulation CFR 177.1520. Each tank satisfies all U.S.C.G. standards. SURPASS material tanks will not emit waste odors or change the taste of fresh potable water. All openings are female NPT (National Pipe Threads) and are located in the same relative position on one end of the tank. Supplied plugs make water tank or holding tanks complete. Instructions included. Gals.: 3, Size: 14" L x 11" W x 6-1/2" H" Sold: Each
|
|
