Generic

Weatherdeck Toggle Switch, Off/On

• Use with Weatherdeck™ waterproof panel. Nickel-plated brass and phenolic non-corrosive construction. On in parenthesis (On) indicates a momentary postion.


• Rated 15A @ 32V DC or 125V AC, 10A @ 250V AC.


• On in parenthesis (On) indicates a momentary postion.


• Terminal :.25" Tab

Positions: Off/On, Type: SPST

Sold: Each

Positions: 4, Color: Gray, Size: 4.3" H x 3.88" W

Yellow polycarbonate. Spring loaded. For weatherproofing old style 26CM10 receptacle. Meets the most stringent requirements of UL's three listing categories for weatherproof plates. Stainless steel screws and neoprene gasket included for mounting to FS/FD type weatherproof boxes.

Description: Fits Old Style 26CM10 Receptacle

Sold: Each

Compact Grey nylon panel mount inlet ideal for bass boat battery charging connection. Has gasketed spring-loaded lift cover for weatherproofing front and neoprene boot for weatherproofing rear. Will accept both 15A 125V and 20A 125V 2 pole, 3 wire straight blade connector bodies. 15 Amp 125 Volt.

:

Sold: Each

For ground fault receptacles and stylized receptacles. For vertical mounting in standard or FS/FD type boxes. PVC.

Color: White

Sold: Each

Type: Light Duty, Length: 8', Work Load: 550

Sold: Each

Type: Heavy Duty, Length: 8', Work Load: 880

Sold: Each

A: 11 1/2", B: 10", C: 5", D: 1", Fastener: #10RH

Sold: Each

• Complete air/fuel ratio metering system with built-in data logging. Includes WEGO III unit shown above, Bosch LSU4.2 5-wire wide-band oxygen sensor, 18x1.5mm weld nut for mounting sensor on exhaust pipe, and software on CDROM
• Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure
• Can be used for on-road or dyno testing
• Suitable for automotive, motorcycle, and other small engine applications
• Highly accurate with less than ±0.10 AFR error over 10.3 - 19.5 AFR range
• Easy free-air calibration procedure corrects for sensor aging effects
• 0-5V analog AFR output for interface to dyno instrumentation
• Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions
• Wide supply voltage range from 11-16V allows operation from battery on small engines or race vehicles without an alternator. Current draw is approx. 1 amp
• Built-in USB interface
• Fully encapsulated with water-proof LED display
• Compact size: 4" L x 2" W x 0.5" H

Rise: 4-1/4", Drop: 6-1/4", Rating: 10,000 or 15,000lbs, Tongue Capacity: 1,000 or 1,500 lbs

• Finished with black powder coat
• Fits 2" x 2" trailer hitch receivers
• 2 Settings for different capacities

Zinc Plates w/Straps

Size: 12" L x 3" W x 1-1/4" T", Material: Zinc

Sold: Each

Formed hot dipped galvanized

Weld-In Breather Extension Kit

• Available: (1) One
• -16 thread size

Weldon "long" 100 micron filter / assembly

Weldon Billet Fuel Filters are manufactured with the same exacting specifications and stringent quality requirements as our Racing Fuel Pumps. Weldon's Premium Filter media whether replaceable, paper cellulose or cleanable, stainless steel protects Carburetors and Injectors from contamination.

Features:
• 100 Micron Stainless Steel filter for use before the 600-A and any other manufactures' fuel pump
• 40 Micron paper cellulose filter for use before Weldon Billet and Cast Bodied pumps
• 10 Micron paper cellulose filter for use after all fuel pumps
• Over 60 sq. in. of filtering area
• -12 AN O-ring ports, 10 AN O-ring ports, 8 AN O-ring ports
• Radiused end caps to improve fuel flow within filter
• 6.75" Long x 2.38" Dia.
• Black/Gold Bright Dipped Anodized for a long lasting high-performance finish
• Minimal pressure drop

Bypass Fuel Regulator- up to 120 psi

• .281" bypass orifice
• 1/8" NPT Gauge Port
• 1/8" NPT manifold pressure reference port
• (2) -10 pressure ports
• -8 return port

Weldon 145 GPH Inline Fuel Pump

• 170 GPH at 15psi
• 145 GPH at 30psi
• -10 inlets and outlets

NOT USCG APPROVED

Weldon 15 PSI 4 Port Adjustable Fuel Regulator

Revolutionary Tool-Free pressure adjustment -- allows for more precise control of base fuel pressure with single hand adjustability.

Features:
• Stainless Steel Poppet and Delrin seat comprise the most modern cartridge design and allows for the most consistent fuel delivery in the industry
• "Creep" characteristics are unaffected by outlet port configuration, allowing the use of as many or as few ports as desired
• Can be used in single, dual, and "split" carb'd applications without compromising performance
• Industry Standard -- mounting and port configuration for easy installation
• Largest, least restrictive internal flow chamber
• Innovative valve cartridge has the largest flow paths to support higher fuel flows
• Unique Valve seat design provides smooth and predictable valve response with the most stable fuel delivery
• Resilient Teflon diaphragm is compatible with all racing fuels
• Designed to maintain steady fuel delivery during dramatic changes in fuel demand, such as WOT conditions, boost application and gear changes
• Adjustable from 4-15 psi
• 1/8" NPT Gauge Port
• 1/8" NPT manifold pressure reference port (filtered vent -- supplied)
• Fuel pressure increases on a 1:1 ratio with boost
• One -10 Inlet with four -6 pressure ports
• Replaceable / interchangable internal components

Bypass Fuel Regulator

• .281" bypass orifice
• 1/8" NPT Gauge Port
• 1/8" NPT manifold pressure reference port
• (2) -10 pressure ports
• -8 return port