Camshafts and Valve Train - Cam and Lifter Kit Library

Hydraulic Roller - good for Jet boat with A impeller, strong mid-range, needs good exhaust, 1500-5500 RPM

Note: These are non returnable

Hydraulic Roller - largest for inboard/outboard, good for mid-range, noticeable idle, 1200-5200 RPM

Note: These are non returnable

Hydraulic Roller - good for jet with A impeller, needs good exhaust, 1500-5500 RPM

Note: These are non returnable

Hydraulic Roller - good for pleasure use and economy smooth idle, 1000-5000 RPM

Note: These are non returnable

Hydraulic Roller - largest for inboard/outboard, good for strong mid-range, noticeable idle, 1200-5200 RPM

Note: These are non returnable

Hydraulic Roller - good for jet with A impeller, needs good exhaust, 1500-5500 RPM

Note: These are non returnable

Hydraulic Roller - largest for inboard/outboard, good for strong mid-range, noticeable idle, 1200-5200 RPM

Note: These are non returnable

Hydraulic Roller - good for pleasure use and economy smooth idle, 1000-5000 RPM

Note: These are non returnable

Hydraulic Roller - good for Jet boat with A impeller, strong mid-range, needs good exhaust, 1500-5500 RPM

Note: These are non returnable

Hydraulic Roller - largest for inboard/outboard, good for mid-range, noticeable idle, 1200-5200 RPM

Note: These are non returnable

Hydraulic Roller - good inboard/outboard, pleasure, ski, and economy, smooth idle, 1000-5000 RPM

Note: These are non returnable

Hydraulic - Jet with A impeller, strong mid-range, good throttle response, noticeable idle, 1600-5800 RPM.

Note: These are non returnable

Edelbrock Rollin’ Thunder Camshaft # 3714 is designed for 4.3L 90 Degree V6 Chevy engines and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For use with OEM hydraulic roller lifters (use original lifters). Not for 1992-Later 4.3L balanced shaft engines.  

Camshaft specifications:

• Intake duration: 210 Degrees 
• Exhaust duration: 214 Degrees
• Intake lift: .479” 
• Exhaust lift: .488”
• Lobe separation: 112 Degree 
• Intake Center Line: 107 
• Vacuum: 17”

Note: These are non returnable

Perfect for a customer seeking strong performance while using a exhaust Diverter / silent choice style exhaust system. CAM KIT WITH 24X TIMING CHAIN SET

These cams are made from high quality billet blanks.

This is an excellent performance camshaft for use with wet exhaust system LS EFI performance engines, strong power gains while EFI friendly. CAM KIT WITH 24X TIMING CHAIN SET.

These cams are made from high quality billet blanks.

This is a serious performance cam while providing maximum torque and horsepower from a HP long SS riser wet perf. exhaust system. CAM KIT WITH 24X TIMING CHAIN SET.

These cams are made from high quality billet blanks.

High Performance cam for bigger cubic inch LS engines seeking a broad power band in a higher rpm range Dry-Tailpipe exhaust recommended due to possible reversion concerns. CAM KIT WITH 24X TIMING CHAIN SET.

These cams are made from high quality billet blanks.

Perfect for a customer seeking strong performance while using a exhaust Diverter / silent choice style exhaust system. CAM KIT WITH 58X TIMING CHAIN SET

These cams are made from high quality billet blanks.

This is an excellent performance camshaft for use with wet exhaust system LS EFI performance engines, strong power gains while EFI friendly. CAM KIT WITH 58X TIMING CHAIN SET.

These cams are made from high quality billet blanks.

This is a serious performance cam while providing maximum torque and horsepower from a HP long SS riser wet perf. exhaust system. CAM KIT WITH 58X TIMING CHAIN SET.

These cams are made from high quality billet blanks.