MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
The Xtreme Flush Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of Electro-polished Stainless Steel for maximum corrosion resistance and easily mount in the dash panel through a 1/4” diameter hole and will conveniently wire up to your switch to indicate when the switch is on. They are available in Red and Blue and are wired for a 12V. system. The clean, Flush Mount LED’s mount in a Counter Sunk Hole and lay flush with the top of the Dash Panel.
These LED's are for 12 Volt systems ONLY.
5mm Flush Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Use a 90 degree counter sink to (3/8" Dia.) Insert the LED thru the drilled hole and push the O-Ring onto the LED body. Then push the retaining ring onto the LED forcing it to compress the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
Starting From:
$6.99
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
The
Xtreme Panel Mount LED’s, 5mm (3/16”) Diameter Lens. They are made of
Electro-polished Stainless Steel for maximum corrosion resistance and
easily mount in the dash panel through a 1/4” diameter hole and will
conveniently wire up to your switch to indicate when the switch is on.
They are available in Red and Blue and are wired for a 12V. system.
These LED's are for 12 Volt systems ONLY.
5mm Panel Mount LED's Mounting & Wiring instructions:
Hole Diameter: Drill a (.25 Dia.) 1/4" Thru Hole. Insert the LED thru the drilled hole and push the O-Ring onto the LED
body. Then push the retaining ring onto the LED forcing it to compress
the O-Ring.
Wiring: Connect the red wire to +12 volts/connect the Black wire to the (-) Ground.
Starting From:
$7.99
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
Colored Gauge Bulb Covers, available in Red, Blue, Green, and Yellow. Goes over Standard gauge bulb used in Autometer, Hardin, etc... gauges. Note Livorsi gauges use LED lights and these will not work with them or any other gauge that uses LED's. Comes in packs of 3.
Green LED Indicator Light, 5/16 mounting hole, 12 Volt
A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.
LED Lights for Livorsi Gauges, Wedge Style. 12.8v. LED lights outshine and outlast incandescent bulbs. NOTE: These do not work with standard DC/DCS 2-1/16" or 2-5/8" gauges. On those gauges the led is soldered to the circuit board. These lights only work on Tachs and Speedos.
Replacement Light Bulb & Socket Assy for Autometer Gauges
4.9 Watt bulb for use with 2-1/16'' and 2-5/8'' gauges with steel cases. Also used in some tachometers and speedometers. Note: Replaces old style socket. Designed for use in Autometer gauges.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
Amber LED Indicator Light, 5/16 Mounting Hole, 12 Volt
A polished metal housing gives these lights an attractive look anddurability. 12 V panel mount, for 5/16” panel hole. Comes with 6 inches of 18gauge wire leads. Provides a high intensity brightness and is water tight.Available in Red, Amber, and Green.