516-77000-9600 This panel mounted hi amp circuit breaker is available in 30 amps to 150 amps. Internal components are waterproof sealed. Switchable/Manual type.
|
|
755-3509 10 Amp Mercury Style Circuit Breaker
These breakers are the most common marine units used on factory style as well
as aftermarket marine engines and harnesses. Be careful not to exceed the
original amperage rating of your existing harness.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Breakers - 5 to 30 AMP Versions
These breakers are the same units used in our engine harnesses. Be careful
not to exceed original amperage rating of your existing harness.
- Input voltage rating: 125/250VAC; 32/50VDC
-
Interrupting Capacity: 125/250VAC x 1,000A(UL 1077)
-
Typical life: 1,000 operations at 200% overload.
-
Insulation Resistance: >100MOHM (DC 500V)
-
Dielectric Strength: > 1,500VAC/min.
|
|
755-3514 50 Amp Mercury Style Circuit Breaker
These breakers are the most common marine units used on factory style as well
as aftermarket marine engines and harnesses. Be careful not to exceed the
original amperage rating of your existing harness.
|
|
516-3200-2001-006 Marine Grade 6 Circuit Breaker Block Panel
- Clear insulating cover with label recesses accept Small Format Labels
- Label Set included.
- Breakers not included.
|
|
620-08810 Marine Grade 6 Circuit Fuse Panel - Clear insulating cover with label recesses accept Small Format Labels
- Cover Satisfies ABYC/USCG requirements for insulation
- Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
- Accepts ATO and ATC fast acting blade fuses
- 20 write-on circuit labels included
- Tin-plated copper buses and fuse clips give 30 Amperes rating per circuit
- Accepts ATO and ATC fast acting blade fuses
- Dimensions: 3-3/8" Width 5" Length 1-1/2" Height
|
|
516-3200-0001 Marine Grade 12 Circuit Fuse Panel with LED Lights and Ground Screw
- Clear insulating cover with label recesses accept Small Format Labels
- Label Set included.
- LED Indicator Lights
|
|
516-3200-700-012 Marine Grade 12 Circuit Fuse Block
- Clear insulating cover with label recesses accept Small Format Labels
- Label Set included.
- Fuses not included.
|
|
516-3200-2001-012 Marine Grade 12 Circuit Breaker Panel
- Label Set included.
- Clear insulating cover with label recesses accept Small Format Labels
|
|
516-312315-B-004 This heavy duty bus bar has 4 stud connections, 3/8"-16 thread.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Cover for the 4 Stud Busbar, see related parts
|
|
516-312723-B-022
- Combines negative and positive buses on one block
- Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation requirements
- Same as Blue Seas 2723
| Specifications |
| Maximum Voltage |
300V AC
48V DC
|
| Number of Screw Terminals |
5 per bus
|
| Number of Terminal Studs |
2 per bus
|
| Terminal Type |
#10-32 Screw
5/16" Stud
|
| Continuous Rating |
130A AC
150A DC
|
| Base Material |
UL 94-V0 Rated, Glass Reinforced Thermoplastics
|
| Bus Material |
Tin-Plated Copper CDA 110 / UNS 11000
|
| Cover Material |
Clear Polycarbonate
|
| Mounting Screw |
#10 (M5)
|
| Screw Terminal Torque |
18 in-lb (2.03 Nm)
|
| Stud Torque |
120 in-lb (13.56 Nm)
|
| Weight |
0.61lb (0.28 kg)
|
| Weight |
0.61lb (0.28 kg)
|
|
|
516-1200-500-0092 Waterproof Circuit Breaker Holder
- Circuit Breaker and wiring not included.
|
|
516-2301-002 This 40A surface mount, sealed, and potted relay from Bluewater is designed for reliability in high-demand marine environments. Built to withstand saltwater conditions, it’s fully waterproof, ignition protected, and perfect for handling high current loads with a smaller-rated switch.
The #10/32 studs, which provide strong cable retention on the high-current terminals. The relay’s signal wires draw under 100mA, allowing even the smallest switches to operate it effectively. The signal terminals feature standard 0.250” and 0.187” Quick Connects for easy setup.
This relay includes only Normally Open (NO) contacts. For applications needing Normally Closed (NC) contacts, a different model is needed. It comes with nuts for the screw terminals, supports up to 40A max current, and has clearly stamped terminal labels for easy identification.
Dimensions: 2-1/4″ x 1-9/16″
|
|
735-2 + Option(s) Circuit Breaker Nut and Boot System
The Circuit Breaker Nut and Boot System compliments your circuit breaker switches while adding a protective seal against moisture. The nut and boot system easily installs without removing your dash panel. Fits all ETA circuit breaker switches
Includes:
- 6 Clear Boots
- 6 Seals
- 6 Powder-coated Nuts
- 1 Installation Wrench
These work with 3/8" thread circuit breaker switch.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Available in clear and black. These boots add a soft touch to Bluewater circuit breaker buttons.
|
|
464-420810-1 Circuit Breaker Thermal AC/DC 10A
Seadog Thermal AC/DC Circuit Breakers are constructed of stamped brass with bolded bakelite.
|
|
464-420830-1 Circuit Breaker Thermal AC/DC 30A
Seadog Thermal AC/DC Circuit Breakers are constructed of stamped brass with bolded bakelite.
|
|
464-420820-1 Circuit Breaker Thermal AC/DC 20A
Seadog Thermal AC/DC Circuit Breakers are constructed of stamped brass with bolded bakelite.
|
|
464-7048 Circuit Breaker 187 Surf 150A
Blue Sea Systems 187-Series Heavy Duty Circuit Breakers provide heavy duty circuit protection for up to 150 amp load when switching and circuit protection are both necessary. They feature single lever operation and a trip-free design which cannot be held "ON" during fault current conditions. They are available in surface or panel mount designs.
Features:
- Max voltage: 48V DC
- Type: Thermally Responsive Bi-Metal Blade
- Class: Type III
- Terminal stud: 5/16"-18
- Mounting hole: Accepts #10 (M5) Screw
- Single lever operation
- Recessed mounting holes
- Ignition protected for use on gasoline powered boats
- Meets SAE J1171 external ignition protection regulations
- Waterproof to IP66
|
|
