Outdrives and Accessories - Gimbal Assemblies / Transom Housings, Complete

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

IMCO Extreme Advantage HP Gimbal with Outside Steering Kit

Now you can eliminate the weak link in your drive train and run without the worry of mechanical failure. The HP Gimbal Housing gives your drive the strength it needs. Check these IMCO, HP Gimbal super features:

• The HP Gimbal Housing uses a thicker than stock casting.
• The HP helmets have been beefed up in all critical areas including the pin locations that are normally prone to failure.
• The HP Gimbal lower swivel pin is 40% stronger than original.
• The HP Gimbal has a removable bearing pack for easy maintenance.
• The HP Gimbal nameplate can be simply unscrewed for access to the upper swivel shaft nut, without removing the housing from the transom.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

Stern Advantage Steering and tilt rams are 100% 316 stainless stee. Designed on crandshaft center line for maximum strength and reliability. Integrated Hydraulic system for easy installation, with braided 316 stainless steel lines. No additional through hulls required in transom for hose connections.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

Stern Advantage Steering and tilt rams are 100% 316 stainless stee. Designed on crandshaft center line for maximum strength and reliability. Integrated Hydraulic system for easy installation, with braided 316 stainless steel lines. No additional through hulls required in transom for hose connections.

This item does not ship UPS, Please Call To Order.

Features:

All gimbal parts are constructed from A-356 aluminum, and heat treated to T6 full hardness.

IMCO gimbal housing has a thicker casting than stock and features a removable bearing carrier pack for easy maintenance. The lower swivel fork is 40% stronger, than standard. The removable nameplate on top allows for quick access to the upper swivel shaft nut without removing the housing from the transom.

Stern Advantage Steering and tilt rams are 100% 316 stainless stee. Designed on crandshaft center line for maximum strength and reliability. Integrated Hydraulic system for easy installation, with braided 316 stainless steel lines. No additional through hulls required in transom for hose connections.

IMCO Extreme Advantage HP Gimbal Without Steering

Now you can eliminate the weak link in your drive train and run without the worry of mechanical failure. The HP Gimbal Housing gives your drive the strength it needs. Check these IMCO, HP Gimbal super features:

• The HP Gimbal Housing uses a thicker than stock casting.
• The HP helmets have been beefed up in all critical areas including the pin locations that are normally prone to failure.
• The HP Gimbal lower swivel pin is 40% stronger than original.
• The HP Gimbal has a removable bearing pack for easy maintenance.
• The HP Gimbal nameplate can be simply unscrewed for access to the upper swivel shaft nut, without removing the housing from the transom.

Bravo Transom Assembly - Heavy Duty. No Trim Sender.

Mercruiser Bravo Transom Assembly w/Trim Cylinders 6-6311002NZ

New Bravo Original Equipment made by Mercruiser complete transom plate assembly with trim pistons.
Fits Bravo I, II and III. Non-smartcraft applications.
Note: Rated Grade-8 for 4.3, 5.0, 5.7, 6.2-Liter and 350 Magnum and 7.4-Liter Mercruiser engines.
Not for 496 cu.in. 8.1-Liter Magnum engines.

Alpha 1 Gen 2 Mercruiser 6111002LP complete brand new transom plate assembly with trim cylinders. Fits: 1991 to current Alpha 1 Gen 2. Replaces Original Equipment made by Mercruiser part #6-6111002LP.

Complete Transom assembly to Replace Mercruiser Bravo I, II and III Transoms. OE#'s 6311002NZ & 6211002NZ. Does not replace Mercruiser Bravo ITS Transom