Outdrives and Accessories - Drive Stands

Bolt Together Heavy Duty Outdrive Stand For Mercruiser, Volvo & OMC

This stand was built to withstand the abuse of any boat shop or the home mechanic. Constructed from 1” square and 1/8” thick steel tubing. Heavy-duty swivel casters are mounted on all 4 corners making this unit easy to roll around the shop. Non-slip rubberized marine grade tape is added to the top rails for the drive to rest upon without scuffing.

• The stand measures 12.5" Wide x 24.5" Length x 22.5" High with casters

In most cases this Drive Stand can help in the removal and or the installation of your outdrive (removal of the prop is required for this step). You can put your drive on this stand from the front or from the back of the stand. No need to flip your drive around on the stand. Most other stands on the market today you have to remove the drive from the stand and turn the drive around and replace the drive back onto the stand to perform work and do it all over again when you want to reinstall the drive.

You can perform maintenance on your drive with the drive stand on the ground or with the casters removed these stands can be bolted to your bench top for a more permanent repair station. When not in use these can be stacked for storage.

This stand will support the following outdrives:

If your cavitation plate is at least 5-1/2" wide and the bottom of the lower drive to the cavitation plate is less than 20 inches this stand will work for you.

This is the best all around stand on the market today. Painted black.
Some Assembly Required.