Outdrives and Accessories - Gears for Bravo, Imco and Others

Install Order:

1. LOAD RING 
   
2. O-RING
3. LOAD CARRIER 
4. LOCK TAB 
5. CARRIER NUT  

1-1/4" Bravo XR Replacement Prop Shaft with Blue Carrier

1:26 XR Lower Ratio Gears

These forged XR Lower Gears allow you to have a 1.50 upper XR gears and make your drive to a 1:35 set or 1:26 ratio over all. Bearing and seal kits not included. All drive parts have no warranty.

1:35 XR Lower Ratio Gears

These forged XR Lower Gears allow you to have a 1.50 upper XR gears and make your drive to a 1:35 set or 1:26 ratio over all. Bearing and seal kits not included. All drive parts have no warranty.

1:50 XR Lower Ratio Gears

These forged XR Lower Gears allow you to have a 1.50 upper XR gears and make your drive to a 1:35 set or 1:26 ratio over all. Bearing and seal kits not included. All drive parts have no warranty.

Gear Set (19/16) Mercruiser 43-840898A3

Supersedes: 43-849348A3

Supercedes: 43-849348A3

Mercury XZ Bravo Gears Upgrade Kit 1:50 Ratio

You can now upgrade your standard Bravo upper to the NewXZ Gear Set from Mercury. This kit will come with all the bearings,seals, new clutch, shift fork, XZ gears. Correct shims are required and are an option if needed. Before you order this we need to know what shim is stamped on your case. Remove rear cover to see your stamp on the case. Any questions please call on our techs to help you locate it. Please review the ordering instructions to make sure you get the right shims with your kit.

High RPM Upper Bearing Kit

Here is a complete upper Bravo bearing kit. These bearings are an upgrade over your stock bearings. They have a higher RPM rating, which allows cooler oil temperature and better drive life.

• Replaces all Bravo and B-Max shift rings that have left hand threads.
• *Note: This shift ring will not replace early style press on rings. 
• GearMUST have left hand fine threads.
• *This part is not available from Mercury.